How do we bill customers for accessorial charges the carrier added?
How do we bill customers for accessorial charges the carrier added?
It is the last week of the month. A finance analyst reviews freight spend and finds $4,800 in accessorial charges on carrier invoices: liftgates, residential deliveries, a redelivery, two detention charges and a limited-access fee. All of them were paid. None were billed to customers. The sales team quoted delivered prices that assumed a standard dock delivery. The analyst wants to know which of these the company could have billed, and how to stop absorbing them next month.
To bill customers for carrier accessorials, the company needs three things in place: terms that allow it, a checked carrier charge with evidence, and a billing step that happens soon after the carrier invoice is approved. If any one of them is missing, the charge usually stays with the shipper.
The order matters. First confirm the customer agreed to pay extra delivery services. Then confirm the carrier's charge is valid. Then send the customer a charge they can verify. Teams that start with the customer invoice and work backward end up billing charges that were never valid, or billing valid ones without the support the customer needs to approve them.
What counts as an accessorial
An accessorial is any carrier charge beyond the base freight rate and fuel. The ones that most often land on a customer's bill are:
- Liftgate at delivery, when the receiver has no dock.
- Residential or limited-access delivery, for homes, farms, schools, construction sites and similar addresses.
- Inside delivery, when the freight must go past the threshold.
- Appointment or notify before delivery, when the receiver requires a scheduled time or a call ahead.
- Detention, when the truck waits beyond free time at the receiver.
- Redelivery, when the first attempt failed because the receiver was closed or refused.
- Reconsignment or delivery change, when the customer changes the address after pickup.
- Lumper, when the receiver requires a third-party unloading service.
Who the cost belongs to
The carrier bills whoever hired it under the freight terms. For a prepaid shipment, that is the shipper. Whether the shipper can then pass the cost on depends on the sale, not on the carrier's invoice. The guide to prepaid, collect and third-party freight terms explains which party receives the carrier bill under each term.
Under prepaid and add, the shipper pays the carrier and adds the freight to the customer's invoice, so accessorials can usually follow if the terms say "freight and related charges." Under a delivered price, freight is built into the product price, and extra charges are only billable if the agreement lists the exceptions. Under collect terms, the customer pays the carrier directly and the shipper is not in the middle.
The cost of not billing
Absorbed accessorials do not show up as a single big loss. They show up as freight costs that run a little ahead of what was priced, load after load. On one order, the margin is thin but positive. On an account with frequent liftgate and residential deliveries, unbilled charges can erase the freight margin entirely. The article on quoting freight to a customer when the carrier charges more covers the quoting side of the same problem.
Want to see where your accessorials went?
Let's review the accessorials you absorbed last month. You don't need to prepare anything: Cartage maps the workflow with you on the call.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.
Book a demo →What is the step-by-step process to bill an accessorial to a customer?
Bill an accessorial in six steps: confirm the terms, audit the carrier charge, gather the evidence, decide the amount, send the charge and record the result. Each step uses documents the shipment already produces.
Step 1: Confirm the customer's terms
Read what the customer agreed to. Check the quote, the order confirmation and any master agreement. Look for language like "freight prepaid and added," "accessorial charges billed at cost" or "delivery services outside dock-to-dock billed separately." If the terms are silent, the shipper may still ask the customer to pay, but it is a request, not a right. Decide whether the relationship and the amount justify the request.
Step 2: Audit the carrier charge
Before the charge goes anywhere, check it against the booking. Was the service ordered, or was it needed because the order lacked a detail? Is the amount the one in the carrier's rate confirmation or agreement? Did the delivery actually require it? A liftgate charge on a delivery to a warehouse with ten dock doors is a carrier question, not a customer question.
Step 3: Gather the evidence
Each type of charge has its own proof:
- Liftgate, residential, limited access: the delivery receipt or POD noting the service, and the delivery address.
- Detention: arrival and departure times from the POD, the carrier's records or the appointment confirmation, plus the free time agreed.
- Redelivery: the carrier's attempt record, the reason the first attempt failed and the new delivery date.
- Reconsignment: the customer's written request to change the address and the carrier's charge for the change.
- Lumper: the receipt from the unloading service. The guide on checking a lumper fee on a carrier invoice covers that charge in detail.
Step 4: Decide the amount
Bill the customer at cost unless the terms allow a handling margin. If the agreement allows an admin fee, apply it consistently. If the charge was caused partly by the shipper, such as a booking that left out the residential flag, consider splitting it or absorbing it. Billing a customer for the shipper's own data error damages trust more than the charge is worth.
Step 5: Send the charge with the evidence
The customer invoice line should name the service, the shipment reference the customer uses (their PO, not only the shipper's load number), the delivery date and the amount. Attach or link the evidence. A short note helps: "Liftgate required at delivery; receiver has no dock. Delivery receipt attached."
Step 6: Record what happened
Note on the shipment whether the charge was billed, at what amount, when and whether the customer paid or disputed it. That record shows which customers routinely need special services and which charges the company keeps absorbing.
A hypothetical example worked through
Consider a hypothetical distributor selling equipment to contractors under prepaid and add terms. An LTL shipment to a job site arrives with a carrier invoice of $410: $285 linehaul and fuel, $95 limited-access delivery and $30 notify before delivery. The rate confirmation listed the limited-access and notify services because the order flagged the job site. The POD shows the delivery on the agreed date.
The analyst confirms the terms say "freight and delivery charges billed at cost," approves the carrier invoice and bills the customer $410 as freight, with the two accessorials listed by name and the POD attached. The customer pays without a question, because the charge was on the quote and the evidence came with the bill.
Now change one detail. The order did not flag the job site, the carrier quoted a standard commercial delivery and the limited-access fee appeared only on the invoice. The analyst still audits the charge and, if valid, still pays the carrier. Whether to bill the customer is a judgment call: the terms allow it, but the customer was quoted a lower freight estimate. Many teams bill it with an explanation the first time and fix the order data so the next quote includes it.
Which accessorials are hardest to bill, and why?
The hardest accessorials to bill are the ones nobody expected, the ones with weak evidence and the ones that arrive after the customer has already paid. Each one has a different fix.
Charges that were never in the quote
A liftgate or residential fee that appears only on the carrier invoice surprises everyone. The customer was quoted a lower freight cost and pushes back. The fix is upstream: capture delivery details in the order so the carrier quotes them. The article on B2B shipments to residential addresses lists the order fields that prevent those surprises.
Detention with soft timestamps
Detention at the customer's dock is one of the most common charges to pass through, and one of the most disputed. The customer will ask when the truck arrived, whether it was on time for its appointment and when it left. If the carrier's times come only from a driver's note, the customer may reject it. Billable detention needs times the customer can check, ideally from the POD or the appointment record. The guide on disputing detention charges on a carrier invoice explains the same evidence from the carrier side.
Redeliveries and refusals
When a delivery fails because the receiver was closed, refused the freight or was not ready, the redelivery fee is usually the receiver's responsibility under most sales terms. The challenge is proving why the first attempt failed. A carrier attempt note that says "closed" with a time is useful. One that says "no delivery" is not.
Charges discovered late
Carrier invoices for LTL often arrive a week or more after delivery, and accessorials are sometimes billed on a separate invoice later still. If the customer's invoice already went out with freight at the quoted amount, the shipper has to send a supplemental bill. The longer the gap, the less likely the customer pays it.
Accessorial types, evidence and billing difficulty
| Accessorial | Common cause | Evidence the customer needs | Typical difficulty |
|---|---|---|---|
| Liftgate at delivery | Receiver has no dock | POD noting liftgate, delivery address | Low if quoted, medium if not |
| Residential delivery | Address is a home or home business | Address and carrier's classification | Medium |
| Limited access | Job site, school, farm, storage unit | Address and delivery note | Medium |
| Inside delivery | Freight taken past the threshold | POD or delivery note naming the service | Medium |
| Appointment or notify | Receiver requires a call or scheduled time | Appointment record or carrier note | Low |
| Detention at delivery | Receiver held the truck beyond free time | Arrival and departure times, free time terms | High |
| Redelivery | Receiver closed or refused | Carrier attempt record with reason and time | High |
| Reconsignment | Customer changed address after pickup | Customer's written request, carrier charge | Low |
| Lumper | Receiver requires an unloading service | Lumper receipt | Medium |
Why the charge and the customer reference drift apart
The carrier invoice uses the carrier's PRO number. The shipper's records use a load or order number. The customer pays against its own PO. If the three are not linked on one shipment record, an analyst has to match them by hand before anything can be billed. That matching is often why accessorials sit unbilled until month-end, and then never get billed at all.
Which rules keep accessorials from being absorbed?
Set the rules once: what the terms say, which charges pass through, when the bill goes out and who decides the gray cases. Then the analyst follows the rules instead of debating each charge.
Rule 1: Put accessorial language in every quote and agreement
The simplest fix is in the sales terms. A line stating that delivery services beyond a standard dock delivery are billed at cost gives the shipper the right to pass charges through. Sales owns this language. Logistics and finance should review it once a year.
Rule 2: Capture delivery requirements at order entry
Liftgate, residential, limited access, inside delivery and appointment requirements should be fields on the order, not notes in an email. When the order carries them, the carrier quotes them, the rate confirmation lists them and the customer sees them on the quote.
Rule 3: Audit before billing
Never pass a carrier charge to a customer before checking it. If the carrier's charge is wrong and the customer pays it, the shipper has billed an error and still has to dispute it with the carrier.
Rule 4: Set a billing window
Decide how fast accessorials must reach the customer: for example, within five business days of the carrier invoice being approved. For customers with frequent accessorials, consider holding the freight portion of the sale invoice until the carrier invoice arrives.
Rule 5: Name who decides gray cases
Some charges are partly the shipper's fault. Name the person who decides whether to bill, split or absorb, and record the reason. Sales should have a voice for key accounts, but someone has to decide quickly.
Mistakes that cost money
Billing without evidence. The customer disputes it, the analyst digs for the POD and the charge ages until it is written off.
Billing what was never valid. A carrier error passed to the customer becomes two disputes instead of one.
Waiting until month-end. Charges batched into a monthly review are older and harder to collect than charges billed as they are approved.
Absorbing silently. If nobody records which charges were absorbed and why, the same customer and the same dock will cost the same money next month.
Charging inconsistently. Billing one customer for liftgates and absorbing them for another without a reason invites questions from both.
Which checklist should sales, logistics and finance share?
A shared accessorial checklist assigns each step to the team that controls it. Most absorbed charges come from a gap between two teams, not from one person's error.
| Stage | Check | Owner |
|---|---|---|
| Agreement | Do the quote and terms say delivery services are billed separately? | Sales |
| Agreement | Is a handling or admin fee allowed, and at what amount? | Sales and finance |
| Order entry | Are liftgate, residential, limited access, inside delivery and appointment flags filled in? | Customer service |
| Booking | Do the quote request and rate confirmation list the required services? | Logistics |
| Delivery | Does the POD note the services performed and the times? | Logistics |
| Carrier invoice | Does each accessorial match the booking, the POD and the carrier's agreed amount? | Accounts payable |
| Carrier invoice | Was the charge caused by missing order data or by the receiver? | Logistics |
| Customer billing | Is the charge billable under the terms, and at what amount? | Finance |
| Customer billing | Does the line carry the customer's PO, the service name, the date and the evidence? | Finance |
| Customer billing | Was it billed within the agreed window? | Finance |
| Review | Which customers and docks generated absorbed charges this month? | Logistics and finance |
| Review | Which order fields should change to prevent repeats? | Customer service and sales |
How to start
Pull last month's carrier invoices and list every accessorial line. Mark each one: billed to the customer, absorbed by choice or absorbed by accident. The accidental ones show where the process breaks. Usually it is one of three things: missing order data, missing evidence or a billing step that nobody owns.
What to measure each month
Track the accessorial dollars paid to carriers, the dollars billed to customers and the dollars absorbed, by customer. The gap tells the story. A customer with a large, steady gap may need different terms, a different delivery service or a price change.
How does Wilson, by Cartage, help bill customers for carrier accessorials?
Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays freight for manufacturers and distributors, and it keeps each accessorial tied to the load with the evidence a customer needs. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.
Wilson works as the company's free logistics department, built from four parts.
The labor
The labor is the work. Wilson requests quotes from the company's approved carriers and compares them on total cost, including the delivery services the order calls for. It books with written acceptance and a rate confirmation that lists those services. During transit it tracks the load with the best source available and handles exceptions: when a delivery is delayed or fails, it contacts the carrier, tells the team and tells the customer if configured. After delivery it requests the POD and follows up with the carrier until it arrives. The team doesn't chase carriers for paperwork.
The data
The data is the record. Wilson keeps every order, load, quote, rate, document and contact on record as it works, with every message and change kept in the shipment's change history. The rate confirmation, the POD, the carrier invoice and the evidence for each accessorial sit on the same shipment, linked to the order. Records are searchable and exportable, so finance can pull last month's accessorials by customer. Wilson can also produce carrier-performance and lane-rate reports on request from the loads it runs. Wilson replaces the TMS for freight execution and connects to the company's ERP. Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.
The network
The network gives the shipper better freight rates on every lane because its volume counts with every other Wilson customer's. Carriers and brokers are on the network, and the company still approves who hauls its freight.
The payments
The payments protect both sides of the bill. Wilson audits every carrier invoice against the rate confirmation and the POD before money moves. An accessorial that the booking does not support is flagged, and Wilson asks the carrier why before paying. Invoices outside the rules wait for a person, and the whole invoice waits, since there are no partial payments. Approved invoices are paid from the Wilson Wallet, which the shipper funds, with payments going out on Fridays.
What stays with the company
Wilson does not set the customer's terms or decide whether to bill a gray-area charge. Those are sales and finance decisions. Whether approved accessorials are written back to the ERP for customer invoicing depends on the scope of the ERP connection, which Cartage confirms during discovery. What Wilson provides is a checked charge with its evidence attached, ready for whoever bills the customer.
Control starts with assisted execution. The company sets approval limits, and routine actions can run automatically within those rules as the workflow is proven. Timing depends on scope: most teams start on a few lanes and expand from there.
Pricing
Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.
FAQs
Can Wilson help us bill customers for carrier accessorials?
Wilson, by Cartage, an AI logistics agent, audits each carrier invoice against the booking and the POD and keeps every accessorial on the load with its evidence. That gives finance a checked charge, with the delivery receipt or timestamps attached, ready to bill under the customer's terms. Whether approved charges flow back to the ERP for customer invoicing depends on the scope of the connection.
Can we charge a customer for a liftgate the carrier added?
Yes, if the customer's terms allow delivery services to be billed and the carrier's charge is valid. Send the POD or delivery note showing the liftgate was used. If the order never mentioned that a liftgate was needed, the customer will likely ask why it was not on the quote.
Should we mark up accessorials we pass to customers?
Only if the terms allow a handling fee. Most shippers bill accessorials at cost to keep disputes low. If a fee is added, apply it the same way for every customer and write it into the agreement.
What evidence does a customer need for a detention charge?
The arrival and departure times at the customer's dock, the appointment time and the free time agreed with the carrier. Times from the POD or an appointment record are stronger than a driver's note. Without them, most customers will dispute the charge.
How soon should we bill a customer for an accessorial?
As soon as the carrier invoice is checked and approved. Set a short window, such as five business days. Charges billed weeks later are much more likely to be disputed or ignored.
What if the accessorial was caused by our own missing order data?
Then consider absorbing it or splitting it, and fix the order fields so the next quote includes the service. Billing the customer for the shipper's error usually costs more in goodwill than the charge recovers.
Who pays accessorials on a collect shipment?
On a collect shipment, the customer pays the carrier directly, so the accessorials are on the customer's carrier bill. The shipper is not in the middle unless the carrier bills it by mistake.
Can we hold the customer invoice until the carrier invoice arrives?
Yes, for the freight portion. Some shippers bill the product right away and the freight once the carrier invoice is approved. It works well for customers that often need special delivery services.
How do we stop absorbing the same accessorials every month?
Record which charges were absorbed, by customer and dock, and why. Most repeat from the same missing order fields or the same terms gap. Fix those and the charges either get quoted or get billed.
Does Wilson tell the customer when a delivery problem may lead to a charge?
Wilson tells the customer about exceptions like delays or failed deliveries if the company configures it to. The team decides whether and when a charge is billed. The messages are kept on the shipment, so the customer conversation is part of the evidence.
Sources
- Cartage, Wilson product FAQ and product scope, October 2026: https://cartage.ai
Let's review the accessorials you absorbed last month. You don't need to prepare anything: Cartage maps the workflow with you on the call.
