The carrier only says “today” when we ask for an ETA. How do we get an actual arrival time?
Short answer
Ask for a time and the truck's location, not a yes or no. Check the freshest source first, such as GPS data or the carrier's tracking page. If the data is old, call dispatch or the driver. Tell the customer only a time that a current source confirms. Wilson, by Cartage, an AI logistics agent, calls dispatch and follows up by email until a current source gives the time.
Book 15 minutes with the team →Why does the carrier only say “today” when we ask for an ETA?
It is 10:15 a.m. A customer's receiving manager emails: their dock closes at 3:00, and they need to know if the truck will make it. The coordinator emails the carrier. At 11:40, dispatch replies: “Delivering today.” The customer writes back: “What time?” The coordinator calls dispatch. Hold music. At 12:30 the coordinator gets through: “Driver's running, should be there this afternoon.” The customer is still asking at 1:45.
Carriers say “today” because the person answering often does not have a better number at hand, and because the question did not ask for one. To get an actual arrival time, ask for a time and a current location, check the best tracking source for that load first, follow up at set points before the window and confirm the time before passing it to the customer. A usable ETA has four parts: a time or short window, a source, the time it was given and the truck's position when it was given.
The carrier is rarely hiding something. Dispatchers handle many trucks at once. Unless the truck shares GPS or ELD data with dispatch, the dispatcher only knows what the driver said at the last check call. “Today” is a safe answer that is almost always true and almost never useful.
What makes an ETA usable
An ETA is useful when someone can make a decision with it. Compare these answers:
| Answer | Can the customer plan with it? | What is missing |
|---|---|---|
| “Today” | No | Time, source, location |
| “This afternoon” | Barely | Time, source, location |
| “Around 2 p.m.” | Partly | Source, location, when it was given |
| “Truck is 40 miles out, ETA 1:30 to 2:00, per driver at 12:10” | Yes | Nothing important |
| “GPS shows 38 miles from the consignee at 12:15; carrier confirms 1:45 arrival” | Yes | Nothing important |
The last two answers name a source and a time. The customer can decide whether to hold the dock open. The coordinator knows when to check again.
Why the answer matters more for some loads
For many deliveries, “today” is fine. The dock is open all day, and the receiver does not need to plan. The ETA matters when:
- The receiver closes early or takes deliveries only in a window.
- The load needs a crew, a forklift or a liftgate ready at the dock.
- The freight is needed on a production line.
- The customer has a delivery appointment that can be missed.
- Another load is waiting on the same truck or dock.
For those loads, a vague ETA is a risk. Treat them differently from the start.
Why LTL and truckload ETAs are different
On a truckload, one driver carries one load from pickup to delivery. The driver knows the next stop, and the arrival time depends on miles, traffic, hours of service and any stop the driver plans. A good question to dispatch or the driver usually gets a good answer.
On LTL, the freight moves through one or more terminals. On the day of delivery it is loaded onto a local truck with many other shipments. The arrival time depends on where your stop falls on that driver's route, and the route is often set early that morning. Before the route is set, the terminal honestly may not know more than “today.” After the route is set, the terminal can usually give a window.
That means the timing of the question matters. For LTL, ask the delivering terminal after the local trucks leave in the morning. For truckload, ask the driver or dispatch as the truck gets closer.
Let's review the loads where the ETA was just “today”. You don't need to prepare anything: Cartage maps the workflow with you on the call.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.15 minutes with the team behind Wilson. No prep needed.
Book 15 minutes →How do you get an actual arrival time from a carrier?
Work from the best source down, and ask questions that need a time to answer. Each step below is quicker than the one after it, so start at the top.
Step 1: Check the carrier's data feed
If the carrier sends status by API or EDI, check the latest event first. Look at when it was sent, not just what it says. A status of “in transit” sent yesterday at 6 p.m. tells you nothing about today. A fresh event with a location and a time is a good start.
Step 2: Check GPS or ELD data where the carrier shares it
Some carriers share the truck's location from GPS or the electronic logging device. A location with a time stamp lets you estimate the arrival yourself: miles left, typical speed on that road, and whether the driver has enough hours left to finish the trip. Location data is the most direct answer to “where is the truck now?”, but it still needs a person to check if the driver plans to stop.
Step 3: Check the carrier's website by PRO number
For LTL, the carrier's tracking page by PRO number shows terminal scans and often an “out for delivery” status. It rarely shows a time. It does tell you whether the freight is on a truck today, which narrows the question you will ask next.
Step 4: Email dispatch with a specific question
When the data is not current, write to dispatch. Ask in a way that needs a time:
- “What time will the driver arrive at the consignee, and where is the truck now?”
- “The receiver closes at 3:00. Will the driver arrive before 2:30? If not, when?”
- “Please confirm the driver's current location and the estimated arrival window.”
Avoid yes-or-no questions such as “Is it still delivering today?” They invite a yes-or-no answer.
Step 5: Call dispatch
If there is no reply by a set time, call. Dispatch can often call or message the driver while you wait. Ask the same specific questions. Write down the answer, the name of the person and the time.
Step 6: Call or text the driver when you have the number
The driver knows the answer better than anyone. Some carriers share the driver's number on the rate confirmation or when the load is dispatched. Others prefer that shippers go through dispatch. Follow the carrier's preference. When you do reach the driver, keep it short: current location, planned arrival time, any stop planned before delivery.
Step 7: Confirm and record
Write the ETA on the shipment record with the source and the time it was given. If you then tell the customer, note that too. When the next update comes in, add it rather than replacing the first one, so anyone can see how the ETA moved.
Which source to try first
| Situation | First source | If it is not current |
|---|---|---|
| Truckload, carrier shares GPS or ELD | Location data | Email or call dispatch |
| Truckload, no location data | Carrier's API or EDI status | Email, then call dispatch; driver if known |
| LTL out for delivery | Carrier website by PRO | Call the delivering terminal |
| Load running late already | Last known location | Call dispatch or driver at once |
| Receiver closes soon | Fastest direct answer: driver or dispatch call | Escalate to the team and the customer |
When should you ask for an ETA, and how often?
Ask at set points tied to the delivery window, not whenever someone remembers. A short schedule gets better answers with fewer calls.
The points that matter
For a load with a delivery window or appointment, check at these points:
- Morning of delivery. Confirm the load is on a truck and heading to the consignee today.
- About four hours before the window. Get a location and an estimated time.
- About two hours before the window. Confirm the estimate is still good.
- At the start of the window, if no arrival. Get a new time and decide whether to warn the customer.
The exact points depend on the lane and the receiver. Long-haul truckload may need a check the evening before. A short local LTL delivery may need only one check before the window.
When to stop asking
Stop asking when the source is current and the truck is moving as planned. If GPS shows the truck on time, a phone call to dispatch adds nothing. Save calls for loads where the data is old or the time is tight.
When to ask more often
Ask more often when:
- The last update is more than two or three hours old.
- The truck is close to the window and the location data is missing.
- The carrier has already changed the time once.
- The customer has said the dock will refuse a late truck.
The guide on what to do when a carrier's ETA goes stale covers how long to wait between follow-ups.
What to do when the answer is still “today”
Sometimes even a specific question gets “today.” When that happens:
- Ask again, by phone if you emailed, with the receiver's closing time.
- Ask for the driver's current location instead of an arrival time.
- Ask for the driver's number or ask dispatch to call the driver now.
- Tell the team the ETA is not confirmed and when you will check again.
A note that says “carrier says today, no time confirmed, next check 1:00” is more honest and more useful than guessing a time.
Don't trust the first word over the data
If dispatch says “1:30” but the GPS shows the truck 200 miles away at noon, the GPS wins. Ask dispatch to explain the gap. The same goes for a vague reply such as “tomorrow morning” for a pickup; the guide on whether “tomorrow morning” is a confirmed pickup time shows how to pin it down.
What mistakes make ETAs less reliable?
Most bad ETAs come from asking the wrong question, using an old source or passing on an unconfirmed time. Each mistake has a simple fix.
Mistake 1: Asking yes-or-no questions
“Is it still on track?” gets “yes.” Fix: ask for a time and a location.
Mistake 2: Treating an old status as current
A “departed terminal” scan from last night does not say when the truck will arrive today. Fix: check when the status was sent and ask for a fresh one if it is old.
Mistake 3: Asking everyone at once
The customer, sales and the coordinator all email the carrier about the same load. Dispatch gets three questions and answers one. Fix: one person or one process asks the carrier, and everyone else reads the shipment record.
Mistake 4: Telling the customer before checking
Sales passes on “around 2” from a phone call nobody wrote down. The truck arrives at 4:30. Fix: tell the customer only what a current source confirms, and say when the next update will come. The guide on asking the carrier before telling the customer covers this step.
Mistake 5: Forgetting hours of service
A driver who is close to the limit of their driving hours may have to stop before delivering, even if the truck is 60 miles away. Fix: when the ETA is close to the end of the day, ask dispatch whether the driver can finish the trip today.
Mistake 6: Not writing down the source
When the ETA moves, nobody knows which answer came from where. Fix: record each ETA with its source and the time it was given.
Mistake 7: Calling the driver when the carrier said not to
Some carriers ask shippers to go through dispatch. Calling the driver against that rule can cause friction and safety concerns. Fix: follow each carrier's preference, and keep the driver's number with the load only when the carrier shared it.
Mistake 8: No plan for when the time slips
The ETA moves from 1:30 to 3:30, past the receiver's closing time. Nobody has decided what happens next. Fix: decide ahead of time who calls the receiver, whether to ask for a later receiving time and whether to reschedule.
What checklist keeps ETAs accurate on tight deliveries?
Use one checklist for every load with a tight delivery window, from booking to arrival. It turns “today” into a time before the customer has to ask.
| When | Check | Who |
|---|---|---|
| At booking | Note the receiver's hours and any appointment on the load | Coordinator |
| At booking | Ask whether the carrier shares GPS or ELD location | Coordinator |
| At booking | Ask for the driver's number, if the carrier allows it | Coordinator |
| At pickup | Confirm pickup time and planned delivery date | Coordinator |
| Day before delivery | Confirm the load is on schedule; flag long-haul risk | Coordinator |
| Morning of delivery | Confirm the load is on a truck for the consignee | Coordinator |
| About 4 hours before | Get a location and an estimated time | Coordinator |
| About 2 hours before | Confirm the time; ask about planned stops | Coordinator |
| If time slips past the window | Tell the receiver; ask for a later time or reschedule | Coordinator and team |
| On arrival | Record arrival time and source | Coordinator |
| After delivery | Request the POD | Coordinator |
What to send the customer
When you do tell the customer, send a short message with:
- The estimated time or window.
- Where it came from: “per the driver at 12:10” or “per GPS at 12:15.”
- When you will update them next.
- What happens if the time moves.
A customer who knows the source and the next update time is less likely to call in between.
Keep the message short and plain. Do not add a reason for a delay unless the carrier gave one. Do not promise a time the carrier did not confirm. If the time moves again, send the new time with its source, even if the change is small. Customers forgive a moving ETA much more easily than a silent one, and a clear update often saves the receiving team from holding a crew at the dock for a truck that is still two hours away.
When the carrier cannot give a time
Some carriers, especially on LTL, cannot give a time until the truck is loaded for local delivery. In that case, tell the customer what is known: “out for delivery today, the terminal expects the driver between 1:00 and 4:00, we will confirm by 11:00.” That is honest and gives the customer something to plan with.
Set the rules by customer, not by load
Not every customer needs the same checks. Write a short rule for each customer or ship-to that has strict receiving: the closing time, whether appointments are required, how much notice the dock wants before a truck and who to call if the truck will be late. Keep the rule with the customer's record, so it applies to every load to that address without anyone having to remember it. When a new coordinator joins or someone is out, the rule still holds.
Who should own the follow-up
One person or one process should own the ETA for each load. When several people ask the carrier, answers get split across inboxes and phone calls. When one owner asks and records the answer, everyone else can read it. Sales and customer service should know where to find the latest ETA, and should ask the owner instead of the carrier.
What to review each month
Look at the loads where the ETA was wrong or missing. Was the source old? Did the carrier share location data? Did anyone ask at the right points? Patterns by carrier and lane show where to ask for better data or change the follow-up schedule. Keep the review short and focused on loads that had tight delivery windows.
How does Wilson, by Cartage, get an actual arrival time from a carrier?
Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays freight for manufacturers and distributors, and it tracks each load with the best source available, then follows up with the carrier until it gets a usable answer. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.
Wilson works as a free logistics department in four parts.
The labor
The labor is the follow-up itself. For each load, Wilson uses the best source available: the carrier's API or EDI, GPS or ELD data where the carrier shares it, the carrier's website by PRO number, and email or phone calls when nothing else is current. When the source is old or the answer is vague, Wilson follows up with the carrier persistently, by phone and email, with persistence rules per carrier, until it gets an answer. Wilson usually talks to the carrier's dispatch, and it can call or text a driver directly when it has the driver's number. Phone calls today are supported in English and Spanish.
When a load is running late, Wilson contacts the carrier, tells the team and tells the customer if that is configured. If the delay puts the delivery at risk, Wilson presents the options to the team. Wilson tells the team in Slack, Microsoft Teams or email, and customers or consignees by email or SMS where configured.
The data
The data is where each answer lands. Wilson keeps every order, load, quote, rate, document and contact on record. Each ETA, its source and the message it came from are kept in the shipment's change history, so the team can see how the time moved and who said what. When sales or the customer asks, the answer is on the record. Wilson replaces the TMS for freight execution and connects to the company's ERP. Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.
The network
The network gives the shipper better freight rates because its volume counts with every other Wilson customer's. The network includes carriers and brokers. The company still approves who hauls its freight, and Wilson books only approved carriers.
The payments
The payments close the load. Wilson requests and files the POD, audits the carrier invoice against the rate confirmation and the POD, and pays carriers from the Wilson Wallet. Invoices over the rate or outside the rules wait for a person.
Control
Control starts with assisted execution. The company decides which updates go to customers and which stay with the team, and sets approval limits for anything that costs money. Routine actions can run automatically within those rules as the workflow is proven. Timing depends on scope: most teams start on a few lanes and expand from there.
Pricing
Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.15 minutes with the team behind Wilson. No prep needed.
Book 15 minutes →FAQs
How does Wilson get an actual arrival time from a carrier?
Wilson, by Cartage, an AI logistics agent, checks the best source available for each load: carrier API or EDI, GPS or ELD data where shared, the carrier's website by PRO, then email or phone. When the answer is vague, it follows up by phone and email until it gets one. It can call or text the driver when it has the driver's number.
Why do carriers answer “today” instead of giving a time?
The dispatcher often does not have a current location, and the question did not ask for a time. Ask for a time and the truck's location instead.
What counts as a usable ETA?
A time or short window, a named source, the time it was given and the truck's location when it was given. With those four parts, someone can decide what to do.
Should we call the driver directly?
Only if the carrier allows it and has shared the number. Some carriers prefer that shippers go through dispatch. Follow each carrier's preference.
How often should we ask for an ETA?
At set points tied to the delivery window: the morning of delivery, about four hours before and about two hours before. Ask more often if the data is old or the time is tight.
Is GPS data always right?
GPS shows where the truck is, not whether the driver will stop. Use it with a short check with dispatch when the delivery is close to the end of the day.
What should we tell the customer when there is no time yet?
Tell them what is known, where it came from and when you will update them next. That is better than guessing a time.
Does Wilson tell our customers when an ETA changes?
Wilson tells the customer when a load is delayed if that is configured, by email or SMS. The company decides which customers get updates.
Can Wilson call carriers in Spanish?
Phone calls today are supported in English and Spanish. Wilson writes in several languages.
Where does Wilson keep each ETA?
On the shipment record. Every message, confirmation and change is kept in the shipment's change history, with the source and the time.
What if the carrier never answers?
Keep following up by phone and email at set points, and tell the team when the delivery window is at risk. The team then decides whether to warn the customer or reschedule. Wilson follows up with carriers persistently, by phone and email, and tells the team when a delivery is at risk.
Sources
- Cartage, Wilson product FAQ and product scope, October 2026: https://cartage.ai
Let's review the loads where the ETA was just “today”. You don't need to prepare anything: Cartage maps the workflow with you on the call.
