Orders arrive with missing details or a pickup date the carrier can't do. What should happen before booking?
What should happen to an order before anyone books the freight?
It's 4:15 on a Tuesday. An order drops into the shared inbox: eight pallets to a customer two states away, "pick up tomorrow 8 am, deliver Thursday." There's no weight, no pallet height, and the ship-to address is a new location nobody has shipped to before. The warehouse closes at 5. The coordinator can book a truck on the details there are, or stop and ask. Either choice costs something. The question is which one costs less.
Before booking, an order should pass a pre-booking check: confirm the shipment is fully described, confirm the pickup date is possible at both the dock and the carrier, confirm the delivery date is possible from that pickup, and send each gap to the person who owns it. Only then should quotes go out and a carrier be booked. The check takes minutes when the order is complete, and it saves hours when it isn't.
This article is about that check. It is not a list of every field a carrier needs; the freight quote checklist covers the fields by mode. It is also not about getting details out of the sales team; that handoff has its own article on getting shipment details from sales before quoting. Here the focus is the moment an order lands, incomplete or with a date that won't work, and what should happen next.
The pre-booking check at a glance
| Check | Question to answer | Typical owner of the answer | If it fails |
|---|---|---|---|
| Shipment described | Do we know what moves: units, weight, dims, class, hazmat, temperature? | Warehouse or shipping | Stop and ask before quoting |
| Origin ready | Will the freight be packed and on the dock on the pickup date? | Warehouse or production | Move the pickup date or split the order |
| Origin open | Is the dock open and staffed at the pickup time? | Warehouse | Move the pickup time |
| Carrier can pick up | Can a carrier send a truck that day, given the cutoff and the lane? | Logistics | Change the date, service or carrier |
| Destination described | Location type, dock, hours, appointment rules known? | Customer or receiver | Stop and ask before quoting |
| Delivery possible | Can the freight arrive by the required date from this pickup? | Logistics, then sales | Offer options to the order owner |
| References present | PO, order number, appointment number on the order? | Sales or customer service | Book, but confirm before pickup |
| Approval in place | Is the likely cost within the approval limit? | Logistics or finance | Send for approval before booking |
The table is the whole method. The rest of this article explains each row and how to run it without slowing every order down.
Let's review a few orders that needed fixing before they could ship. You don't need to prepare anything: Cartage maps the workflow with you on the call.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.
Book a demo →Which missing details should stop a booking, and which can wait?
Stop the booking for any missing detail that changes the price, the equipment or whether a carrier can haul the freight at all. Proceed with a stated assumption for low-risk details, and book but confirm before pickup for details that don't affect price. Treating every gap the same either stalls every order or lets the dangerous gaps through.
Three kinds of gaps
Sort each missing detail into one of three groups.
Stop and ask. These change the quote or the carrier's ability to move the load. Without them, any price is a guess.
- Weight, handling unit count and dimensions, including pallet height
- Freight class or NMFC item for LTL
- Hazmat details
- Temperature requirements
- Destination location type and dock access
- Equipment type for truckload
Proceed with a written assumption. These rarely change, and a wrong guess is cheap to correct. Write the assumption into the quote request so the carrier prices it explicitly.
- A standard pallet build for a repeat item the warehouse always ships the same way
- Stackability for an item that has always shipped stackable
- Receiving hours for a customer you ship to every week, when the hours are already on record
Book, but confirm before pickup. These don't change the price, but missing them causes refused deliveries or unmatched invoices.
- Customer PO number
- Delivery appointment number
- Receiver contact name and phone
The "new location" rule
One gap deserves its own rule: a destination nobody has shipped to before. A new ship-to address has no history. Nobody knows if it has a dock, if it's a residence or a jobsite, if it takes appointments, or what hours it keeps. Treat every new location as "stop and ask" for location type, dock access, hours and appointment rules, even if the rest of the order is complete. Once those answers are on record, the next order to that location passes without a question.
Don't let an estimate pass as a fact
The most expensive gap is the one that looks filled. An order that shows "1,200 lbs" may be a sales estimate, an ERP calculation from unit weights, or a real scale weight. Only one of those should go to a carrier as a firm number. A unit weight multiplied by quantity leaves out pallets, wrap and dunnage, and a standard wood pallet alone can add 30 to 50 pounds. Two pallets with the same weight but different heights can land in different freight classes.
Mark estimates as estimates. If the quote must go out before the warehouse weighs the freight, say so in the request: "estimated weight, final to follow before pickup." Then send the final weight before the truck arrives, and check the rate confirmation still matches. The guide to freight class, NMFC and density explains why height and weight together drive the LTL class.
Conflicting details are their own category
Sometimes the order isn't missing anything. It contradicts itself. The order says ten pallets and the pick ticket says seven. The order says "dock" and the customer's last three deliveries needed a liftgate. The ship-to address is in one state and the city name belongs to another.
A conflict is not a freight question. It's a business question, and a person who owns the order has to settle it. Booking on either version is a guess. Send the conflict to the order owner with both versions side by side, and hold the booking until one is confirmed.
How do you tell if a pickup date is possible before you promise it?
A pickup date is possible only when four things line up on that day: the freight is ready, the origin dock is open, a carrier can send a truck, and any required appointment can be booked in time. If any one of the four fails, the date fails, no matter what the order says.
1. Is the freight actually ready?
The date on the order is often the date sales promised, not the date the warehouse can have the freight wrapped and staged. Ask the warehouse for the ready date and time, not the ship date. For made-to-order freight, ask production. A ready date of "Thursday" is not enough when the carrier's pickup window is Thursday morning and the freight comes off the line Thursday at 3 pm.
2. Is the origin dock open?
Check the origin's shipping hours on the pickup date. Watch for early closes, holiday schedules, inventory counts and shift changes. A warehouse that loads trucks from 7 to 2 can't hand freight to a carrier that arrives at 4. If the origin requires carriers to book a loading appointment, check that a slot is open.
3. Can a carrier send a truck that day?
Carriers have their own limits. Many LTL carriers need pickup requests by a set time to dispatch a driver the same day, and the cutoff varies by carrier and by terminal. Truckload carriers need lead time to find a truck, and that lead time grows when capacity is tight or the lane is unusual. Specialized equipment such as flatbeds, reefers or liftgate trucks can need more notice. Weekends and holidays reduce or remove pickup service on many lanes.
The practical test is simple: ask the carrier for the pickup date at quote time and read the answer. A quote that says "earliest pickup Friday" when the order says Wednesday is the carrier telling you the date fails. The article on what to do when there's no carrier quote before the pickup cutoff covers the case where quotes don't come back in time.
4. Can the appointment be booked in time?
Some receivers and some origins require appointments booked days ahead. If the pickup itself needs an appointment, the slot has to exist. If the delivery needs one, the delivery slot has to fit the transit time from that pickup. An appointment that can't be booked until the carrier is assigned adds another day of lead time.
Then check the delivery date against the pickup date
Once the pickup date holds, test the delivery date from it. Transit time is the gap that turns a possible pickup into an impossible order.
- LTL transit is quoted in business days, and the pickup day usually doesn't count. Freight picked up Friday afternoon with a two-day transit typically delivers Tuesday, not Sunday.
- Truckload transit depends on distance and driver hours. Under federal hours-of-service rules, a property-carrying driver may drive up to 11 hours within a 14-hour on-duty window after 10 consecutive hours off duty. Many planners use about 500 miles per driving day for a solo driver as a rough figure. A 1,400-mile lane is roughly a three-day run for one driver.
- Parcel transit depends on the service level bought; ground service is quoted in business days.
- Appointments at delivery can add a day if the receiver's earliest slot is after the freight arrives.
A quick feasibility table
| Pickup date problem | How to spot it | First response |
|---|---|---|
| Freight not ready by pickup time | Warehouse ready time is after the carrier's window | Move pickup to the next window, or split the ready freight |
| Dock closed at pickup time | Origin hours on record don't cover the window | Change the pickup time, or ask the warehouse to extend |
| Past the carrier's same-day cutoff | Carrier quotes a later earliest pickup | Book the next available day, or ask another approved carrier |
| Weekend or holiday | Calendar check against the carrier's service days | Move the date, or price premium service with approval |
| No appointment slot | Origin or receiver has no open slot | Request the next slot and adjust the plan |
| Transit too long for delivery date | Pickup plus transit lands after the required date | Offer faster service, earlier pickup or a new delivery date |
Who should be asked, and how do you ask without slowing the order down?
Ask the person who owns the fact, ask once with every question in the same message, ask in the channel they already use, and set a deadline tied to the pickup. The sender of the order is often not the owner of the missing fact, and sending every question back to the sender adds a round trip.
Route each question to its owner
| Missing fact | Usually owned by | Ask about |
|---|---|---|
| Ready date, pallet count, dims, weight | Warehouse or shipping | Packed reality after picking |
| Production completion | Production or planning | When the order will actually be finished |
| Receiver hours, dock, appointment rules | Customer, via customer service or sales | Site details and booking rules |
| Delivery date flexibility | Sales or the account owner | Whether the promise can move |
| Hazmat details | Shipping, safety or the product owner | UN number, class, packing group, quantity |
| Who pays for faster service | Sales, finance or the account owner | Whether the cost goes to the customer |
| Order quantity conflicts | Order owner | Which version is correct |
Ownership varies by company. In some, one shipping team owns everything on the origin side; in others it is split between the warehouse, production and customer service. Map it once, and the routing stops being a decision on every order. The older article on who gets the missing data from an incomplete ERP order goes deeper on ownership.
Ask once, with everything
The slowest pattern is the drip: ask for the weight, wait, ask for the dims, wait, ask about the dock. Each round trip can cost half a day. Instead, run the full check first, list every gap, and send one message per owner with all of their questions in it.
A good request has four parts:
- The order it's about, with the order number and customer, so nobody has to look it up.
- The exact questions, one per line, in plain words: "Pallet height for each pallet, in inches."
- Why it matters, in one line: "Needed before quotes go out; the carrier prices on height."
- The deadline, tied to the pickup: "By 2 pm today to keep a Wednesday pickup."
Ask where people already work
Warehouse leads rarely live in email. Sales reps may answer a Slack or Microsoft Teams message faster than an email thread. Customers usually prefer email from their account rep. The best channel is the one where the owner will see the question before the deadline. Asking in the wrong channel is one of the most common reasons a simple question takes a day.
What do you do when the pickup or delivery date can't be met?
Tell the order owner as early as possible, explain which check failed, and give options with their cost and their new dates, so a person with authority can choose. Logistics shouldn't silently move the date, and it shouldn't book an expensive rescue without approval.
The options to put on the table
When the date fails, most situations have four or five realistic answers.
| Option | When it fits | Trade-off |
|---|---|---|
| Later pickup, same service | Delivery date has slack, or the customer accepts a new date | Cheapest; the customer waits longer |
| Faster service | Pickup date is fine but transit is too long | Higher cost; needs approval |
| Split shipment | Part of the order is ready now | Two shipments, two freight charges |
| Different approved carrier | One carrier can't make the date but another can | May cost more; still within the approved list |
| Changed delivery promise | Nothing else works at an acceptable cost | Sales has to tell the customer |
Faster service usually means expedited LTL, a dedicated truck instead of LTL, a team driver on a long truckload lane, or air freight for small, urgent orders. Each costs more, sometimes much more. Put the price next to the option so the owner chooses with the number in front of them.
Who decides
Logistics can run the check and price the options. The decision belongs to whoever owns the customer promise and the budget. If the faster service costs more than the approval limit, it goes to the person who can approve it. If the delivery date has to move, sales or customer service tells the customer. Write down who decides which case, so nobody waits on a decision that has no owner. The article on configurable approvals for an AI logistics agent covers how those limits are set.
Hypothetical example: the Friday order with a Monday promise
A hypothetical equipment manufacturer receives an order Thursday afternoon. It promises delivery Monday to a customer about 900 miles away. The order asks for a Friday pickup.
The pre-booking check finds two problems. Production says the last two pallets come off the line Friday at 2 pm, after the carrier's usual pickup window. And LTL transit on the lane is three business days, which would land the freight Wednesday at the earliest.
Logistics doesn't book anything yet. It sends the order owner, the sales rep, three options with prices from approved carriers:
- Option A: LTL pickup Monday, delivery Thursday. Cheapest.
- Option B: a dedicated truck Friday late afternoon, delivery Monday. Several times the LTL cost.
- Option C: ship the ready pallets by LTL Friday morning for a Wednesday delivery, and the last two pallets Monday.
The sales rep calls the customer, who needs only the first pallets urgently. Option C wins. Two shipments are booked, both on complete details, and nobody discovers the problem on Monday.
How does Wilson, by Cartage, check an order before booking?
Wilson, by Cartage, is an AI logistics agent that reads each order, runs the pre-booking check, asks the owner of each missing fact before requesting quotes, and holds the booking until the order can actually ship as written. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.
Wilson works as a free logistics department for manufacturers and distributors: what big shippers build over years, Wilson does from day one. Wilson quotes, books and tracks freight, and pays carriers. Each of the four parts of that department applies to the pre-booking check.
The labor
The labor is the work between an order landing and a carrier being booked. Orders reach Wilson by email, through an ERP connection or as CSV or XLSX files. Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope. It checks the order against what the mode needs and against the rules on record for the origin and destination. When a detail is missing or a date is impossible, Wilson doesn't book. It holds the order as pending, asks the customer for the missing detail, with all the questions in one message and the deadline that protects the pickup, and tells the team. People on the team who don't answer get short follow-ups in the same thread, in the channel they normally use, and then the question goes to the team. If a deadline passes while the order is still incomplete, Wilson flags it. It never invents a missing value. Once the order is complete, it requests quotes from approved carriers, reads the earliest pickup and transit each carrier offers, and books within the company's rules. From there it handles the paperwork, pickup, tracking and carrier follow-ups to the final POD. The team doesn't chase carriers.
Wilson checks carrier availability before booking. If a carrier says it can't pick up until a later day, Wilson doesn't accept that silently: it presents the option to the team, updates the expected date on the shipment and leaves the agreed date unchanged. The team decides on any date change. Which dock hours, appointment rules and lead times go into the check depends on what the company has on record; confirm in discovery which of these checks your lanes need.
The data
The data is where the answers live for the next order. Wilson keeps every order, load, quote, rate, document and contact on record as it works, connected to the company's ERP. It also keeps memories and rules, such as "this receiver takes appointments from 6 to 10 am only" or "this warehouse closes at noon on Fridays," learned from its own work or added by the team. The team can edit them. Once a new location's dock and hours are confirmed, the next order to that location doesn't need the question. Records are searchable and exportable with change history, so anyone can see what was asked, who answered and when. No TMS is needed: Wilson replaces the TMS for freight execution and connects to the company's ERP.
The network
The network gives Wilson more ways to make a hard date work. When the usual carrier can't pick up in time, Wilson can request quotes from other approved carriers and from its network, which includes carriers and brokers. The shipper's volume counts with every other Wilson customer's, which can bring better freight rates on its lanes. The company still approves who hauls its freight, so a tight date never becomes an excuse to book an unknown carrier.
The payments
The payments catch what slipped through anyway. If a detail changed after booking, the invoice will show it: a reweigh, a reclass, a liftgate nobody ordered. Wilson audits every freight invoice against the load before money moves, including reweigh and reclass lines against the booking and the documents. An invoice over the rate waits, and Wilson asks the carrier why before paying. Invoices over the rate or outside the rules wait for a person. Approved invoices are paid from the Wilson Wallet. BOL changes to address, freight class, carrier or price go to the load owner.
When Wilson acts and when a person decides
| Situation | What Wilson does | When a person decides |
|---|---|---|
| Order arrives complete | Checks it, requests quotes from approved carriers | When the best quote is above the approval limit |
| A price-driving detail is missing | Holds the order as pending, asks the customer, tells the team | When nobody can supply the detail by the deadline |
| Order contradicts itself | Sends both versions to the order owner | Always: it's a commercial decision |
| Pickup or delivery date can't work | Prices options from approved carriers | The order owner picks the option |
| A rule on record applies | Uses it in the check | When the team edits or removes the rule |
| Invoice doesn't match the booking | Holds it and asks the carrier why | Before any charge outside the rules is paid |
Wilson starts with assisted execution, where people approve its actions. The company sets approval limits, and routine actions can run automatically within those rules as the workflow is proven. People reach Wilson by email, Microsoft Teams, Slack, WhatsApp, text or phone.
Pricing and how teams start
Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract. Cartage doesn't run pilots; most customers start Wilson on a few lanes and expand from there.
FAQs
What does Wilson do with an order that's missing details?
Wilson, by Cartage, an AI logistics agent, doesn't book an order with a missing detail, such as weight, class, dock access or a lot number. It holds the order as pending, asks the customer for the missing detail and tells the team. It never invents the missing value, and if a deadline passes while the order is still incomplete, it flags it to the team.
What should happen when an order arrives with a pickup date the carrier can't do?
Don't book and hope. Check which part failed: freight readiness, dock hours, the carrier's lead time or an appointment. Then give the order owner options with prices, such as a later pickup, faster service or a split shipment. The person who owns the customer promise decides.
Should we quote freight on an incomplete order to save time?
Only with the gaps written into the request as assumptions, and only for low-risk fields. Quoting without weight, dimensions or class means each carrier prices a different guess, so the quotes don't compare and the invoice changes after pickup.
How do we know if a delivery date is realistic?
Start from a pickup date that holds, then add transit. LTL transit is counted in business days, truckload transit depends on distance and driver hours, and delivery appointments can add a day. If pickup plus transit lands after the required date, the order needs a decision before booking.
Sources
- Federal Motor Carrier Safety Administration, Summary of Hours of Service Regulations: https://www.fmcsa.dot.gov/regulations/hours-of-service/summary-hours-service-regulations
- National Motor Freight Traffic Association, Classification: https://nmfta.org/standards/classification/
- Cartage, Wilson product scope, November 2026: https://cartage.ai
Let's review a few orders that needed fixing before they could ship. You don't need to prepare anything: Cartage maps the workflow with you on the call.
