The truck arrived and the receiver was closed. What now?

Driver arrival and detention guideNov 17, 202617 min read

The truck arrived and the receiver was closed. What now?

It is 3:40 p.m. on a Friday. A driver calls the carrier's dispatch: the truck is at the customer's warehouse with 14 pallets, the gate is locked and a sign says receiving closes at 2:00 p.m. on Fridays. The delivery was supposed to be "Friday." Nobody set an appointment time. Dispatch emails the shipper: "Receiver closed. Driver can wait until Monday for layover, or we bring it back Monday with a redelivery fee. Please advise." The customer's buyer is out for the weekend.

When the truck arrives and the receiver is closed, first make sure the freight is safe and the driver has a clear instruction, then find out why the dock was closed, agree in writing on redelivery, storage or layover and its cost, and record the receiver's real hours so the next load does not repeat the trip. The decision in the first half hour sets the cost. A driver with no instruction may leave, and the freight ends up at a terminal with charges the shipper did not choose.

In the example, the receiver was not wrong. Its hours were posted. The problem was a delivery with no appointment time and no one who knew the Friday cutoff. That makes the redelivery charge hard to dispute with the carrier, and the lesson is about the shipper's own booking data.

The first 30 minutes

Do these in order:

  1. Confirm the facts with the carrier. Where is the truck, what time did it arrive, what does the driver see and what are the carrier's options and charges?
  2. Try the receiver. Call the receiving dock, the customer's buyer and any after-hours number. Sometimes a supervisor is still inside and can take the load.
  3. Choose a plan. Wait on site if the receiver opens soon, lay over near the receiver, return to the carrier's terminal for storage or redeliver on the next open day.
  4. Confirm the plan and the cost in writing. Send it to the carrier and ask for a written yes, including any charge.
  5. Tell the customer. Say what happened, when the freight will now arrive and what you need from them, such as a delivery appointment.

Why the cause matters

"Receiver closed" can mean several different things:

  • The receiver's posted hours were missed, because nobody checked them.
  • The receiver closed early or unexpectedly, for weather, inventory or a holiday the shipper did not know about.
  • The appointment was set for a different day or time than the carrier had.
  • The carrier arrived late, outside an appointment that was correct.
  • The address was wrong, and the truck went to an office or a closed building instead of the warehouse.

Each cause points at a different party and a different fix. Write the cause down before arguing about the charge.

Let's review your last delivery that found the dock closed. You don't need to prepare anything: Cartage maps the workflow with you on the call.

See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.

Book a demo →

How do you handle a closed-receiver delivery, step by step?

Work through the delivery in six steps: secure the freight, gather evidence, choose the recovery plan, agree on the cost, reset the appointment and update the record. Doing them in order keeps the cost down and keeps the argument short.

Step 1: Secure the freight and give the driver an instruction

The driver needs to know what to do in the next hour. If nobody answers, many carriers will default to taking the freight back to the terminal, which adds storage and a redelivery fee. A clear instruction, even "wait 30 minutes while we reach the receiver," keeps control with the shipper.

For temperature-controlled or high-value freight, say whether the trailer must stay powered, sealed or attended. If the freight cannot sit over a weekend, that rules out some options.

Step 2: Gather the evidence

Before the details fade, collect:

  • The arrival time from the carrier, ideally with a GPS or ELD timestamp if the carrier shares it.
  • A photo of the closed gate, the posted hours or the sign, if the driver can take one.
  • The delivery appointment, if one existed, with its confirmation number.
  • The receiver's hours as the shipper had them on file.
  • Messages with the receiver and the customer.

This evidence decides who pays. The guide on documenting whether the driver was late or the dock was closed covers the same evidence at the pickup end.

Step 3: Choose the recovery plan

Option When it fits Typical cost Risk
Wait on site Receiver opens within a few hours Detention after free time Driver hours may run out
Lay over near the receiver Receiver opens next morning Layover charge Driver and truck tied up
Return to terminal and store Receiver closed for days Storage plus redelivery Extra handling, damage risk
Redeliver on the next open day Freight can wait, no storage at the receiver Redelivery charge New appointment needed
Deliver to an alternate site Customer has another location that is open Possible reconsignment charge Customer must agree

Charges and terms vary by carrier and by tariff. Ask the carrier for the exact amount before choosing.

Step 4: Agree on the cost in writing

Ask the carrier to state the charge for the chosen plan in an email. Agree on it before the driver moves. If the shipper believes the carrier caused the miss, say so in writing now and note that the charge is disputed. A charge first seen on the invoice three weeks later is much harder to challenge.

Step 5: Reset the delivery

Set a firm delivery appointment with the receiver for the new date: a time, a confirmation number if the receiver gives one and the name of the person who confirmed. Send the appointment to the carrier and ask for a written confirmation. The guide on telling the carrier when a delivery appointment changes covers that handoff.

Step 6: Update the record

Save everything on the shipment: the failed attempt, the cause, the evidence, the plan, the agreed charge, the new appointment and the notices sent. Then update the receiver's profile with the hours you learned. That last step is what prevents the next closed-dock trip.

A short message to the customer

Keep the customer notice plain and specific. For example: "Your order of 14 pallets reached your warehouse at 3:40 p.m. today, after receiving closed at 2:00 p.m. The carrier will redeliver Monday. Please confirm a delivery time between 6:00 a.m. and 2:00 p.m. Monday, and tell us if Friday hours are always 2:00 p.m. so we can book future deliveries earlier." The message reports what happened, asks for one decision and collects the information that prevents the next miss.

What do redelivery, storage and other charges look like, and who pays?

A closed dock can add detention, layover, storage, redelivery and reconsignment charges, and the party that caused the miss should usually carry them. The rate confirmation, the carrier's tariff and the appointment record are the documents that settle it.

The charges

  • Detention: time the driver waits beyond the free time. Free time and hourly rates vary by carrier and contract. Detention is common across freight: an ATRI study found detention at 39.3% of truck stops in 2023.
  • Layover: a flat charge when the truck must stay overnight or longer because it cannot deliver.
  • Storage: a daily charge when freight goes back to a terminal or warehouse.
  • Redelivery: a charge for a second delivery attempt. LTL carriers often list it in their tariff.
  • Reconsignment: a charge for changing the delivery address after pickup.

None of these is a fixed number across the market. The carrier's tariff or the rate confirmation sets it, and contracts can change it.

LTL and truckload are different

On a truckload, the truck and driver are tied to one load, so a closed dock stops the whole truck. Layover and detention charges are common, and the carrier may push to deliver the next morning. On an LTL shipment, the freight usually goes back to the carrier's terminal and comes out again on a later route. Redelivery and storage charges are more common than layover, and the next attempt depends on the carrier's route schedule, not just the receiver's hours. Ask the carrier which applies before agreeing to a plan.

Who usually pays

Cause of the miss Who usually pays Evidence that settles it
Shipper did not check posted receiver hours Shipper Posted hours, no appointment on file
Receiver closed outside its posted hours Shipper, who may pass it to the customer Posted hours, driver arrival time, photo
Appointment given to the carrier was wrong Shipper Appointment record vs what the carrier received
Carrier arrived after a correct appointment Carrier Appointment confirmation, arrival timestamp
Wrong delivery address on the BOL Shipper BOL and order address
Customer refused to open for a scheduled delivery Shipper, who may pass it to the customer Appointment confirmation, customer messages

"Who usually pays" is a starting point. The contract with the customer and the carrier's terms decide. Some shippers pass redelivery charges to customers whose receivers closed early; others absorb them for key accounts. Write the policy down so the decision does not get made fresh every time.

When the customer should pay

If the customer gave the shipper wrong hours, closed without notice or refused a scheduled delivery, the shipper may bill the charge back under its terms of sale. That needs the same evidence: the appointment, the arrival time and the customer's messages. The guide on what to do when the customer refuses the delivery covers the related case where the dock is open but the receiver will not take the freight.

When the carrier should pay

If the carrier had a correct appointment and arrived late, the redelivery is the carrier's problem. Say so in writing on the day, ask the carrier to waive the charge and hold the invoice line if it appears anyway.

Check the invoice

When the carrier's invoice arrives, compare each extra charge against what was agreed in writing on the day. A redelivery charge that matches the agreed amount can be paid. A storage charge for three days when the freight sat one day, or a layover charge that was never discussed, goes back to the carrier with the evidence.

What mistakes make a closed dock more expensive?

Most of the cost comes from slow answers, missing appointments and no record of the receiver's real hours. The fixes are simple and mostly happen before the truck leaves the shipper's dock.

Mistake 1: Booking a delivery with a date but no time

"Deliver Friday" is not an appointment. If the receiver takes freight by appointment or only during set hours, the booking needs a time window that fits those hours. Ask the customer for receiving hours and appointment rules when the order comes in, not when the truck is at the gate.

Mistake 2: Leaving the driver without an answer

Carriers will not wait forever. A driver who hears nothing will follow the carrier's default, which is often a return to the terminal. That turns a one-hour problem into a three-day one.

Mistake 3: Agreeing to charges by phone only

The dispatcher says "layover is $250" on a call. The invoice shows $400. Without the number in writing, the shipper has little to point to. Follow every call with an email.

Mistake 4: Not telling the customer

The customer finds out when its own stock runs short. Tell the customer the same afternoon, with the new date, and ask for the appointment.

Mistake 5: Fixing the load but not the record

The redelivery happens Monday, and everyone moves on. Two weeks later, another truck arrives at 3:40 p.m. on a Friday. Record the hours and rules on the customer or receiver profile after the first miss.

Mistake 6: Turning one closure into a permanent rule without checking

A receiver closed early once because of a storm. Someone writes "closes at noon" on the profile, and future deliveries get squeezed into a morning window for no reason. Confirm the regular hours with the receiver before changing the standing rule.

Holidays and seasonal closures

Many receivers close or cut hours around holidays, inventory counts and plant shutdowns. Ask the top customers for their closure calendars ahead of time and check them when booking. A short list of known closures on each customer's profile prevents a lot of wasted trips. The guide on what to do when a delivery attempt fails covers other failed-delivery causes.

What should a closed-receiver checklist include?

Keep two checklists: one for the day it happens and one for prevention. Both fit on one page.

Same-day checklist

Item Question to answer Owner
Driver instruction Does the driver know whether to wait, lay over or return? Load owner
Receiver contact Have the dock, buyer and any after-hours number been tried? Load owner
Arrival evidence Is the arrival time recorded, with a timestamp if available? Load owner
Photo Did the driver photograph the closed gate or posted hours? Carrier
Appointment Was there an appointment, and does it match what the carrier had? Load owner
Cause Is the cause written down? Load owner
Plan Is the recovery plan chosen? Load owner
Cost Has the carrier stated the charge in writing? Load owner
Approval Does the charge need approval under the company's rules? Logistics manager
New appointment Is a firm appointment set with the receiver and confirmed by the carrier? Load owner
Customer notice Has the customer been told the new date? Load owner or customer service

Prevention checklist

Item Question to answer Owner
Receiving hours Are hours on file for each regular receiver, by day of the week? Logistics
Appointment rule Does the receiver require an appointment, and how far ahead? Logistics
Closures Are known holidays, shutdowns and inventory days on file? Logistics and sales
Booking check Is every delivery booked with a time window inside the hours? Load owner
Address Is the delivery address the receiving dock, not an office? Load owner
Charge policy Who pays redelivery when the customer's receiver is at fault? Finance and sales
Invoice check Are extra charges checked against what was agreed? Finance

How does Wilson, by Cartage, handle a delivery that finds the receiver closed?

Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks and pays freight for manufacturers and distributors, and when a delivery fails at a closed dock it works the exception and keeps the evidence on the shipment. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.

Wilson works as the company's logistics department, in four parts: the labor, the data, the network and the payments.

The labor

The labor is the work from the first quote to the final POD. Wilson tracks each load with the best source available: carrier API or EDI, GPS or ELD data where the carrier shares it, the carrier's website by PRO number, or email and phone calls when nothing else is current. When a delivery fails, Wilson contacts the carrier, tells the team and tells the customer if configured, by email or SMS. Wilson usually talks to the carrier's dispatch and can call or text a driver directly when it has the driver's number.

Wilson asks the carrier for the options and charges in writing, presents them to the team and follows the team's decision. It can read and create appointments in a connected dock calendar. It is not integrated with third-party dock-scheduling portals, so a receiver's portal appointment stays with the team or the customer. Wilson follows up persistently with carriers by phone and email until it gets an answer, and if people on the company's own team do not answer, it follows up in their usual channel and then escalates.

The data

The data is the record. Wilson keeps every order, load, quote, rate, document and contact on record as it works, connected to the company's ERP. The failed attempt, the messages, the agreed charges and the new appointment are kept in the shipment's change history. Wilson replaces the TMS for freight execution and connects to the company's ERP.

Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.

Wilson also keeps memories and rules, such as "this customer's DC receives from 6:00 to 10:00 a.m. only." They come from its own work or from the team, and the team can edit them. When a closed dock suggests a new rule, Wilson asks the team whether to make it one. It never adopts a rule silently, so one storm closure does not become a standing limit.

The network

The network helps when a load has to move again. A shipper's volume counts with every other Wilson customer's, which helps get better freight rates on every lane. The network includes carriers and brokers, and the company still approves who hauls its freight.

The payments

The payments close the loop. Wilson audits every carrier invoice against the rate confirmation, the POD and what was agreed before money moves, then pays carriers from the Wilson Wallet. A redelivery, storage or layover charge outside the rules is held and flagged for a person, and Wilson asks the carrier why before paying. Payments above the approval limits or outside the rules wait for a person.

Control starts with assisted execution. The company sets approval limits, and routine actions can run automatically within those rules as the workflow is proven. Teams reach Wilson by email, Slack, Microsoft Teams, WhatsApp, text or phone.

Pricing

Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract. Timing depends on scope: most teams start on a few lanes and expand from there.

FAQs

What does Wilson do when a truck arrives and the receiver is closed?

Wilson, by Cartage, an AI logistics agent, contacts the carrier, tells the team and the customer if configured, and asks the carrier for its options and charges in writing. The team decides the plan. Wilson then confirms it with the carrier, keeps the evidence on the shipment and holds any charge outside the rules for a person.

Who pays the redelivery fee when the receiver was closed?

It depends on the cause. If the shipper missed the receiver's posted hours or gave a wrong appointment, the shipper usually pays and may bill its customer under its terms. If the carrier arrived late for a correct appointment, the carrier usually should.

Should the driver wait or leave?

If the receiver opens within a few hours and the driver has hours left, waiting may cost less than a redelivery. If the receiver is closed for the weekend, a layover or a return to the terminal may be the only options. Compare the charges in writing before deciding.

What evidence do we need to dispute a redelivery charge?

The appointment confirmation, the carrier's arrival time, ideally with a timestamp, the receiver's posted hours and any photo the driver took. Messages from the day showing what was agreed help most.

Can we bill the customer for the redelivery?

Often, if the customer's receiver closed outside its own posted hours or refused a scheduled delivery, and the terms of sale allow it. Keep the same evidence you would use with a carrier.

How do we stop trucks arriving at closed docks?

Keep receiving hours, appointment rules and known closures on each regular receiver's profile, and book every delivery with a time window inside those hours. Confirm appointments before the truck leaves.

Does Wilson book delivery appointments in retailer or receiver portals?

No. Wilson can read and create appointments in a connected dock calendar, but it is not integrated with third-party dock-scheduling portals and does not upload to portals. The team or the customer handles portal appointments.

Will Wilson remember a receiver's hours after one closed-dock delivery?

Wilson keeps memories and rules the team can edit. When a delivery suggests a new rule, such as earlier Friday hours, Wilson asks the team whether to make it a rule rather than adopting it on its own.

What if the carrier takes the freight back to its terminal without asking?

Ask for the storage and redelivery charges in writing right away and note that the return was not authorized. Set a firm redelivery appointment. Then check the invoice against what was agreed before paying.

Is a redelivery charge the same for LTL and truckload?

No. On LTL, freight usually returns to the carrier's terminal, so redelivery and storage charges are common. On truckload, the truck and driver wait, so layover and detention are more likely. The carrier's tariff or rate confirmation sets the amounts.

Sources

Let's review your last delivery that found the dock closed. You don't need to prepare anything: Cartage maps the workflow with you on the call.

Add Cartage as a preferred source on Google