Carrier rates get renegotiated at the start of the year. How should we prepare?
Short answer
Start with a list of your lanes and the real volume on each one. Add recent quotes, paid invoices and the extra charges carriers billed. Then write a target, a limit and a walk-away rate for each lane. Go into the talks with numbers, not feelings. Pulling those numbers from the loads is the slow part. Wilson, by Cartage, an AI logistics agent, can produce lane-rate reports on request from the loads it runs.
Book 15 minutes with the team →Carrier rates get renegotiated at the start of the year. How should we prepare?
It is early December. A logistics manager at a distributor gets an email from a regional truckload carrier: "Let's set up time to review rates for next year." Two more carriers send the same note that week. The manager opens last year's rate sheets and realizes three problems. Nobody knows how many loads actually moved on each lane. The accessorial charges were never tracked in one place. And the team booked a lot of freight on the spot market with carriers that are not on the rate sheet at all.
To prepare for annual carrier rate talks, build a lane list with real volumes, collect recent quotes and paid invoices for each lane, add the accessorial and service history, and write a target, a limit and a walk-away point for every lane before the first meeting. With that file in hand, the team negotiates from its own data. Without it, the carrier's numbers set the tone of the conversation.
Most shippers do not lose money in a rate review because they negotiate badly. They lose it because they walk in without facts. The carrier knows how many loads it hauled for the shipper, what it billed and where it lost money. The shipper often knows less about its own freight than the carrier does.
Why the start of the year matters
Many carrier agreements and tariffs reset around the new year. Carriers plan capacity and pricing for the coming months, and shippers set budgets. That timing makes the review a natural moment to fix rates that drifted, drop terms that never made sense and move lanes that a carrier serves poorly.
It also creates a deadline. If the preparation starts when the first carrier calls, the team has a few weeks to pull a year of data from email, the ERP, carrier websites and spreadsheets. That is rarely enough. The work below is easier when it starts in the fall.
What the rate review is and is not
A rate review is a negotiation over the terms for the next period: base rates by lane, fuel tables, accessorial charges, minimums, payment terms and the service the carrier commits to. It is not the same as answering a single rate increase notice. A notice is one carrier telling you what it wants. The review is your chance to set the terms across all lanes and carriers at once. If a carrier has already sent a notice, the guide on what to do when a carrier sends a rate increase covers that case lane by lane.
The review is also not a promise of capacity. A contract rate is what the carrier agrees to charge when it accepts a load. Unless the agreement says otherwise, it does not guarantee the carrier will accept every tender. Keep that in mind when you compare a contract rate with spot quotes.
Want help with your lanes before the talks?
Let's review your lanes before the rate talks. You don't need to prepare anything: Cartage maps the workflow with you on the call.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.15 minutes with the team behind Wilson. No prep needed.
Book 15 minutes →What data should you pull before the rate talks?
Pull the data that shows what each lane really cost last year: volumes, rates paid, accessorial charges and service problems. The goal is one file per carrier, built from lanes, that anyone on the team can read.
Step 1: Build the lane list
A lane is an origin, a destination, a mode and a service level. "Chicago to Atlanta" is not specific enough. "Plant 2 to customer DC in Atlanta, dry van truckload, standard service" is. For LTL, the lane also needs typical weight, freight class and pallet count, because those drive the price.
For each lane, record:
- Origin and destination, at the level the carrier prices (zip code or city).
- Mode and equipment: truckload, LTL, flatbed, reefer, drayage or parcel.
- Service: standard, guaranteed, expedited or team.
- Typical shipment profile: weight, pallets, class and any special handling.
- The carriers that moved freight on the lane last year.
Step 2: Count real volume
Volume is the shipper's main bargaining chip, so count it carefully. Use loads that actually moved, not loads that were planned. Split the count by month to show seasonality. A lane with 20 loads a month all year is a different offer from a lane with 200 loads in October and almost none in spring.
Also count which carrier took each load. If the primary carrier on a lane only took half the loads because it declined the rest, that matters. The carrier is asking to keep a lane it did not fully serve.
Step 3: Collect recent quotes
Recent quotes show what the market offered for the same freight. They are often more useful than last year's contract rate, because they reflect current capacity. Collect quotes from the last few months for each main lane, including the ones the team did not accept. Note the date, the carrier, the total and what was included.
If the team does not keep quotes, this step is hard. Quotes often live in email threads, phone notes and carrier websites. That is a good reason to start keeping them now, even if this year's file is incomplete.
Step 4: Pull paid invoices, not just rates
The rate sheet says what the carrier should have charged. The invoice says what the shipper actually paid. The gap is where the money hides. Pull paid carrier invoices by lane and compare them with the agreed rates. Look for:
- Fuel charges that did not match the fuel table.
- Accessorials such as liftgate, residential delivery, detention or redelivery.
- Reweigh and reclass charges on LTL.
- Minimum charges on small shipments.
- Invoices that were paid above the rate confirmation.
Step 5: Add the service record
Price is only part of the talk. A carrier that missed pickups, delivered late or stopped answering emails should hear about it with dates and load numbers. Record missed pickups, late deliveries, tender rejections, damage claims and how long it took to get PODs. Facts with dates change the tone of a conversation more than a general complaint.
The data pack in one table
A short table per carrier keeps the review focused. The example below is hypothetical. It shows the format, not real rates.
| Lane | Loads last year | Current rate | Average paid per load | Accessorials per load | Recent quotes from others | Service notes |
|---|---|---|---|---|---|---|
| Plant 2 to Atlanta DC, dry van | 240 | $1,850 | $1,960 | $110 (mostly detention) | $1,790 to $1,900 | 6 missed pickups, 4 late |
| Plant 2 to Dallas DC, dry van | 95 | $2,300 | $2,320 | $20 | $2,250 to $2,600 | No issues |
| Warehouse to Phoenix, LTL, 4 pallets class 70 | 130 | Tariff with 78% discount | $640 | $85 (liftgate, reclass) | $560 to $690 | 2 damage claims |
In this example, the Atlanta lane looks fine on the rate sheet but costs more once detention is added. The service record also gives the shipper a reason to ask for better terms or move part of the lane. The Dallas lane is close to the market and has clean service, so a small change may be enough.
How do you build the ask for each lane?
Build the ask lane by lane with three numbers and a short list of what you can offer. The three numbers keep the team consistent during the talk. The offer gives the carrier a reason to say yes.
The three numbers
- Target rate. The rate the team negotiates toward. It comes from recent quotes, invoices and what the lane is worth to the business.
- Approval limit. The most the team can agree to without a manager or finance approving it. If the carrier lands between the target and the limit, the team can close.
- Walk-away point. The rate at which the lane goes to the next approved carrier or to spot quotes. Write down which carrier or option is next, so the walk-away is real.
Keep these three numbers separate. A target is a goal, not a promise. A limit is about who has authority. A walk-away point is about the alternative. When they blur, teams agree to rates they would not have accepted if they had looked at the next option. For a closer look at how targets and limits work during a negotiation, see how AI freight negotiation stays within approval limits.
Ask about each part of the price
A carrier may hold firm on the base rate and move on something else. Break the ask into parts:
- Base rate or discount. The line-haul rate for truckload, or the discount and tariff for LTL.
- Fuel table. The fuel surcharge schedule and the index it follows.
- Accessorials. Detention free time and hourly rate, liftgate, inside delivery, redelivery and appointment fees.
- Minimums. The minimum charge per shipment on LTL.
- Terms. Payment terms, how disputes are handled and how long the rates hold.
A small change in detention free time can save more over a year than a few dollars on the base rate. Look at the invoices to see which part cost you the most.
What you can offer in return
Carriers price risk. Anything that lowers their risk or their cost is worth something. Possible offers include:
- A clear volume commitment on a lane, if you can keep it.
- Consistent tenders with enough lead time.
- Loads that are ready when the truck arrives, with short dock times.
- Wider pickup windows on lanes where timing is flexible.
- Faster and more predictable payment.
- Backhaul or balanced freight where you have it.
Only offer what operations can deliver. A volume commitment you miss will hurt the next review more than a slightly higher rate would have.
Contract lanes and spot lanes
Not every lane needs a contract rate. A lane with steady, predictable volume is a good candidate for a contract rate with a primary carrier and backups. A lane with a few loads a year may do better on spot quotes from approved carriers each time. Decide this before the talks so you do not ask a carrier to price a lane you would rather keep on spot. The trade-off is covered in carrier allocation versus spot tendering.
A hypothetical lane ask
Consider a hypothetical lane: Plant 2 to the Atlanta DC, dry van truckload, 240 loads last year. The current rate is $1,850. Recent quotes from other approved carriers ran from $1,790 to $1,900. Detention added about $110 per load on average, mostly because of long waits at the customer's DC.
The ask could be: target $1,800, approval limit $1,860, walk-away $1,900, with the next approved carrier ready at a quote of $1,840. Ask for two hours of free time at delivery instead of one, which addresses the biggest extra cost. Offer consistent weekly tenders with two days of lead time. Raise the six missed pickups and ask what the carrier will do differently. The numbers are an example only. Every lane needs its own.
What mistakes weaken a carrier rate review?
Most weak reviews come from missing data, a focus on the base rate only, or no plan for what happens after the talks. Each mistake has a simple fix.
Mistake 1: Negotiating from the carrier's numbers
If the carrier brings the only volume report, the carrier controls the facts. Bring your own counts by lane. When the two counts differ, ask why. The difference may show loads that went to other carriers because of rejections.
Mistake 2: Comparing base rates only
A carrier with a lower base rate and a strict detention policy can cost more than one with a higher rate and generous free time. Compare the expected total per load, using last year's invoices as a guide.
Mistake 3: Treating every lane the same
An across-the-board increase is easy for the carrier to ask for and easy for the shipper to accept. It is rarely right. Some lanes deserve an increase. Some deserve a decrease. Some should move. Answer each lane on its own.
Mistake 4: No real alternative
A walk-away point without a next option is a bluff. Before the talks, get current quotes from other approved carriers on the main lanes. If a lane has only one carrier that can serve it, say so in your own notes and plan to add a backup.
Mistake 5: Forgetting the people who book
The new rates are only useful if the team books with them. If the new ranking and rates stay in a spreadsheet the coordinators do not open, last year's habits continue. Update the rates, targets, limits and carrier order in the place where booking happens, before the effective date.
Mistake 6: Not checking invoices after the change
Carriers sometimes bill the old rate for weeks after a change, or the new rate before it takes effect. Check the first invoices on each lane against the new rate confirmation. Hold any invoice that does not match.
Mistake 7: Letting the review be once a year only
Markets move during the year. A lane that was priced right in January may be far off by summer. Look at quotes and invoices on the main lanes each quarter, even if you only renegotiate once a year.
A short decision guide
| What the data shows | Likely ask | If the carrier says no |
|---|---|---|
| Current rate above recent quotes, service good | Lower the rate toward the target | Accept up to the limit, or test the next carrier on part of the lane |
| Current rate in line with quotes, service good | Keep the rate, fix accessorial terms | Accept and move on |
| Rate in line, service poor | Keep the rate, ask for service commitments | Move part or all of the lane to the next approved carrier |
| Accessorials high on the lane | Ask for more free time or lower fees | Work on the cause, such as dock delays, and review in a quarter |
| Low volume, irregular lane | Move to spot quotes from approved carriers | No contract needed |
| Only one carrier can serve the lane | Keep the carrier, add a backup | Plan to qualify another carrier before the next review |
Which checklist should you finish before the first carrier meeting?
Finish the checklist below before you sit down with any carrier. It turns the review from a reaction into a plan.
| Item | Question to answer | Owner |
|---|---|---|
| Lane list | Is every active lane listed with mode, service and shipment profile? | Logistics |
| Volume | How many loads moved on each lane, by month and by carrier? | Logistics |
| Recent quotes | What did other approved carriers quote on the main lanes in the last few months? | Logistics |
| Paid invoices | What did each lane really cost per load, including fuel and accessorials? | Finance and logistics |
| Accessorial history | Which extra charges cost the most, and why? | Logistics |
| Service record | Which carriers missed pickups, delivered late or rejected tenders, with dates? | Logistics |
| Targets | What is the target rate for each lane? | Logistics |
| Approval limits | What is the most the team can agree to without approval? | Finance |
| Walk-away points | What is the walk-away rate and the next option on each lane? | Logistics |
| Offers | What can operations really commit to: volume, lead time, dock time? | Operations |
| Contract or spot | Which lanes need a contract rate and which stay on spot? | Logistics and finance |
| Update plan | Who updates rates, targets and carrier order where booking happens? | Logistics |
| Invoice check | Who checks the first invoices after the new rates take effect? | Finance |
A simple timeline
A timeline helps the work start early enough. Adjust it to your own calendar.
- Two to three months before the talks: build the lane list and count volume.
- Six to eight weeks before: collect quotes and invoices, and pull the accessorial and service history.
- Four weeks before: set targets, limits and walk-away points with finance. Get current quotes from alternatives on the main lanes.
- During the talks: negotiate by lane, and get every agreed change in writing.
- Before the effective date: update rates, targets, limits and carrier order where booking happens. Tell sales if freight is priced to customers.
- After the change: check the first invoices on each lane against the new rates.
What to record after each talk
After each carrier meeting, write down what was agreed, lane by lane: the new rate, the fuel table, the accessorial terms, the effective date and any service commitments. Ask the carrier to send the same terms in writing. If something was discussed but not agreed, record that too. Next year, these notes are the first page of the file.
How does Wilson, by Cartage, help a team prepare for carrier rate talks?
Wilson, by Cartage, is an AI logistics agent that quotes, negotiates, books, tracks, audits and pays freight for manufacturers and distributors, and it keeps the records that a rate review needs as it runs each load. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward. Think of it as a free logistics department: what big shippers build over years, Wilson does from day one, in four parts.
The labor. Wilson does the work from the first quote to the final POD: quotes, bookings, paperwork, tracking and carrier follow-ups, by email, phone calls, texts, Slack and Microsoft Teams. When the team needs current market numbers before the talks, Wilson requests quotes from the company's approved carriers and compares them on total cost. After the talks, it negotiates toward the company's rate targets within approval limits. Rates outside the limits go to the logistics team. Wilson does not sign a carrier agreement or accept new contract rates on its own. The team runs the rate talks and makes that call.
The data. Wilson keeps every order, load, quote, rate, document and contact on record as it works, connected to the company's ERP. Wilson replaces the TMS for freight execution and connects to the company's ERP. It can produce carrier-performance and lane-rate reports on request from the loads it runs, which gives the team a starting point for the data pack. These are reports on request, not a standing scorecard. Booking uses a ranked list of carriers per lane, plus decision rules by lane and mode. When the talks change the order on a lane, the team updates the ranking, and Wilson books from it on the next load. Every message, confirmation and change is kept in the shipment's change history.
Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.
The network. Wilson gets better freight rates on every lane because the shipper's volume counts with every other Wilson customer's. The network includes carriers and brokers, which gives the team more alternatives to compare when a carrier holds firm. The company still approves who hauls its freight. Carriers keep their direct contracts and credit terms with the shipper, and Cartage takes no margin on the freight.
The payments. Wilson audits every carrier invoice against the rate confirmation and the POD before money moves, then pays carriers from the Wilson Wallet. That matters most in the weeks after new rates take effect. If an invoice comes in at the old rate, or above what was agreed, it is held for a person. For example, an invoice of $2,410 against an agreed $2,200 waits for review.
Control stays with the company. Wilson starts with assisted execution, the company sets approval limits, and routine actions can run automatically within those rules as the workflow is proven. For how targets and negotiation fit together on a single lane, see whether an AI agent should negotiate or work to a target rate.
Pricing
Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract. Timing depends on scope: most teams start on a few lanes and expand from there.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.15 minutes with the team behind Wilson. No prep needed.
Book 15 minutes →FAQs
Can Wilson help us prepare for carrier rate talks?
Wilson, by Cartage, an AI logistics agent, can produce carrier-performance and lane-rate reports on request from the loads it runs, and it can request current quotes from the company's approved carriers. The team uses those numbers to set targets and limits. The rate talks and the decision to accept new contract rates stay with the team.
When should we start preparing for annual rate talks?
Start two to three months before the talks. Building a lane list, counting volume and pulling invoices takes longer than most teams expect. Starting when the first carrier calls leaves too little time.
What data matters most in a carrier rate review?
Real volume by lane, recent quotes from other approved carriers, paid invoices with accessorials and the service record. Together they show what each lane really cost and what the market offers today.
Should we ask for a lower base rate or better accessorial terms?
Look at the invoices first. If detention, liftgate or reclass charges cost more per load than the gap between the base rate and the market, fixing the accessorial terms may save more. Ask about each part of the price separately.
How do we set a target rate for a lane?
Use recent quotes from approved carriers, what the lane cost last year including accessorials and what the freight is worth to the business. The target is what you negotiate toward. Set an approval limit and a walk-away point next to it.
What if a carrier refuses to lower its rate?
Compare its total cost with the next approved option on the lane. If the next option is cheaper on total cost and service, move part or all of the lane. If not, accept up to the approval limit and review the lane again next quarter.
Should every lane get a contract rate?
No. Lanes with steady, predictable volume suit a contract rate with a primary carrier and backups. Lanes with a few irregular loads often do better with spot quotes from approved carriers on each load.
Does a contract rate guarantee the carrier will take our loads?
Not by itself. A contract rate sets the price when the carrier accepts a load. Unless the agreement includes a capacity commitment, the carrier can still decline a tender. That is why each lane needs backups.
How do we make sure the new rates are used after the talks?
Update rates, targets, limits and the carrier order where booking happens, before the effective date. Then check the first invoices on each lane against the new rate confirmations and hold any that do not match.
Can Wilson pay carriers at the new rates automatically?
Wilson audits each carrier invoice against the rate confirmation and the POD, then pays from the Wilson Wallet under the company's rules. Invoices above the agreed rate or outside the rules wait for a person.
Sources
- Cartage, Wilson product FAQ and product scope, October 2026: https://cartage.ai
Let's review your lanes before the rate talks. You don't need to prepare anything: Cartage maps the workflow with you on the call.
