One carrier is late again and again. Do we keep it or replace it?
Should you keep or replace a carrier that keeps running late?
It is the third Monday in a row. A manufacturer's plant ships two truckloads a week to a distributor's warehouse four states away. The same carrier has the lane because its rate is the lowest. On Friday the load delivered six hours after the appointment. Two weeks ago it picked up late and missed the appointment entirely. The distributor's receiving manager now emails the sales rep, not logistics. The logistics manager wants to drop the carrier. The controller points out it is $180 a load cheaper than the next option.
Keep a carrier that runs late only if the record shows the problem is limited, explained and fixable; otherwise move it down the ranked list on the lanes where it fails and give its loads to the next approved carrier. The decision should come from load records on that specific lane, a direct conversation with the carrier and the real cost of late freight, not from the most recent bad week.
Most "always late" carriers are not late everywhere. They are late on certain lanes, at certain pickup times or out of certain terminals. A clear look at the record usually turns one big decision into several small ones: keep the carrier on these lanes, fix one issue on another and move one lane to the next carrier.
Why the gut reaction is risky
Late loads are memorable. On-time loads are invisible. A team that remembers three bad deliveries may forget twenty good ones. The opposite also happens: a carrier with a friendly dispatcher gets a pass for a real pattern. Both errors come from deciding without the record.
Replacing a carrier also has costs. The next carrier may be more expensive, may not know the shipper's docks and may bring its own problems. A switch made in anger often ends with a new set of complaints six weeks later.
What "late" should mean
Agree on definitions before counting. Late pickup means the truck arrived after the agreed pickup window. Late delivery means it arrived after the appointment or the agreed delivery date. A load that was late because the shipper's product was not ready is not the carrier's late. For a full treatment of definitions, see how to measure on-time delivery correctly.
Want a second look at your lanes?
Let's review the lanes where one carrier keeps running late. You don't need to prepare anything: Cartage maps the workflow with you on the call.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.
Book a demo →How do you check a carrier's late record on each lane?
Pull every load the carrier ran on the lane over a fixed period, mark each one on time or late for pickup and delivery, and record the cause of every late load. The goal is a short table per lane that anyone on the team can read in a minute.
Step 1: Pick the period and the lanes
Use a period long enough to include a normal mix of weeks. Ninety days is a common starting point for a busy lane. For a lane with one load a week, a longer period gives a fairer picture. List every lane the carrier ran, not just the one that hurts.
Step 2: Use the shipment records, not memory
The best data comes from the shipment record: the agreed pickup window and delivery appointment, the actual arrival and departure times, carrier updates and the POD. Email threads and phone notes fill the gaps. If the team has no record of the agreed times, that is the first fix: a late load can only be measured against a date someone wrote down.
Step 3: Mark the cause of each late load
For every late pickup or delivery, record one main cause:
- Carrier: truck not dispatched, driver ran out of hours, equipment problem, wrong terminal routing.
- Shipper: product not ready, paperwork missing, dock busy.
- Receiver: appointment moved, dock closed, long wait to unload.
- Outside: weather, road closure, a regional disruption.
Only carrier-caused late loads should count against the carrier. If half the late loads trace back to the shipper's own dock, a new carrier will not fix them. That pattern is covered in why late deliveries start before pickup.
Step 4: Compare to the other carriers on the same lane
A carrier's record means more next to the alternatives on the same lane. If two other approved carriers ran the lane in the same period, compare their rates of carrier-caused late loads. The guide on comparing carrier on-time performance by lane shows how to build that comparison without one blended score.
A hypothetical lane record
Consider a hypothetical carrier with loads on four lanes over 90 days:
| Lane | Loads | Late pickups (carrier cause) | Late deliveries (carrier cause) | Other-cause late loads | Read |
|---|---|---|---|---|---|
| Plant A to Distributor East | 24 | 4 | 7 | 2 | Real problem |
| Plant A to Customer DC South | 18 | 0 | 1 | 3 | Performing |
| Plant B to Warehouse Central | 30 | 1 | 2 | 1 | Performing |
| Plant B to Customer West | 9 | 2 | 1 | 0 | Watch; small sample |
The table changes the conversation. The carrier is not "always late." It is late on one lane, and maybe on a second with too few loads to judge. Dropping it everywhere would hurt the two lanes where it performs.
Step 5: Count the cost of the late loads
For the problem lane, add up what late freight actually cost:
- Expedites or replacement shipments.
- Redelivery or rescheduling charges.
- Customer chargebacks or penalties.
- Detention or overtime at the shipper's or receiver's dock.
- Team time spent on calls, emails and customer updates.
Compare that total to the rate difference with the next approved carrier on the lane. In the opening scenario, $180 a load on two loads a week is about $1,560 a month over a 4.33-week month. One missed appointment that triggers an expedite can wipe that out.
What should you say to a carrier that keeps running late?
Talk to the carrier before moving freight, using the lane record, and ask for a specific fix with a date. Many carriers can change the cause of a late pattern once they see it laid out clearly.
Prepare the facts
Bring the lane, the period, the number of loads, the late loads with dates and the cause of each. Leave out the loads that were the shipper's or receiver's fault. A carrier will push back on a list that blames it for a closed dock.
Ask the right questions
- Which terminal or dispatch office handles this lane?
- Is the pickup window workable for how the carrier routes trucks in that area?
- Are drivers arriving with enough hours to reach the delivery appointment?
- Is the lane being covered by the carrier's own trucks or passed to partners?
- What will change, and by when?
The answers often point to a fix. A pickup window that is too late in the day may push drivers into hours-of-service limits before the delivery. A terminal that is short on drivers on Fridays may need the load tendered a day earlier.
What a good fix looks like
A good fix names a cause, a change and a date. "We'll do better" is not a fix. "This lane moves out of our north terminal, which is short on drivers on Fridays; we'll dispatch from the south terminal starting next week" is. Other fixes that often work:
- Tendering the load a day earlier so the carrier can plan a truck.
- Moving the pickup window earlier in the day so the driver has hours left for the delivery.
- Assigning a named dispatcher to the lane.
- Sending a check call the morning of pickup confirming the truck and driver.
If the carrier proposes a fix that needs something from the shipper, such as an earlier pickup window, check that the dock can deliver it before agreeing. A fix the shipper cannot support will fail and land back on the carrier.
Agree on a review date
End the conversation with a clear next step: "We'll keep the lane with you for the next six weeks and review the record on that date." Write it down and share it with the carrier. If nothing improves, the next decision is easy and fair.
When not to talk first
Some patterns call for action before the conversation. If a carrier misses a critical delivery that shuts down a customer's line, move the next loads on that lane at once and talk afterward. If a carrier stops answering, there is nothing to discuss. For repeated missed pickups, see how distributors flag carriers with repeated missed pickups before the next tender.
When should you move the lane, and how?
Move a lane when the carrier's record stays worse than the alternatives after a fair review, or when the cost of late freight clearly exceeds the rate savings. Moving a lane does not have to mean dropping the carrier.
A decision guide
| Situation | Decision | Next step |
|---|---|---|
| Late loads mostly caused by shipper or receiver | Keep the carrier | Fix the dock, the paperwork or the appointment process |
| Carrier late on one lane, fine on others | Re-rank on that lane only | Move the next approved carrier up on the lane |
| Carrier agreed to a fix; record improves | Keep | Review again in the next period |
| Carrier agreed to a fix; nothing changes | Move the lane | Re-rank and tell the carrier the reason |
| Carrier misses a critical delivery | Move the next loads at once | Talk afterward; decide on the lane after review |
| Small sample, mixed record | Watch | Keep tracking until there are enough loads |
| Carrier stops answering or refuses loads | Move the lane | Review the carrier's approval with the team |
Re-rank instead of banning
Most shippers book from a ranked list of approved carriers per lane. The first carrier gets the first offer; if it declines, the load moves to the next. Moving a late carrier from first to third on one lane keeps it as a backup there and leaves its strong lanes alone. That keeps capacity in the network and gives the carrier a path back.
Tell the carrier why
Carriers improve when they know where they stand. A short note works: "Based on the last 90 days, we are moving you from first to third on Plant A to Distributor East. You remain first on Plant B to Warehouse Central. We'll review again in the next quarter." It keeps the relationship and sets the bar for coming back.
Watch the new first carrier
The carrier that moves up should face the same review. A new first carrier on a lane needs the same definitions, the same record and the same review date. Otherwise the team trades one unmeasured problem for another.
Common mistakes
- Deciding after one bad week. One load is a story; a pattern needs a record.
- Blaming the carrier for the shipper's dock. Late product and missing paperwork make any carrier late.
- Switching every lane at once. The carrier may be the best option on lanes nobody complains about.
- Not writing the change down. If the ranking changes only in one person's head, the next booking may go to the same carrier.
- No review date. Without a date, a "temporary" move becomes permanent, and the next carrier is never measured.
What should the team track so the next carrier decision is easier?
A carrier decision is only as good as the record behind it, so the team should capture the same few facts on every load and review them on a fixed schedule. When the record is built as loads move, the next "keep or replace" question takes an hour, not a week of digging through email.
What to record on every load
For each load, the record should hold:
- The lane, mode and carrier.
- The agreed pickup window and the delivery appointment or date, as confirmed in writing.
- The actual arrival and departure times at pickup and delivery.
- Every carrier update, with the time it came in and the source: carrier system, tracking link, email or phone.
- The cause of any late pickup or delivery, chosen from a short list.
- Any extra cost tied to the load: expedite, redelivery, detention, chargeback.
- The POD and any exceptions written on it.
Seven facts per load is enough. Long forms get skipped. A short list filled in every time beats a detailed one filled in on bad days only.
Use a short list of causes
Free-text causes are hard to count. "Driver late," "truck late," "carrier delay" and "late arrival" all mean the same thing, but they show up as four rows in a report. Pick five or six causes and use them every time: carrier dispatch, carrier equipment, driver hours, shipper not ready, receiver issue, outside event. Add an "other" with a note for the rare case.
Review on a fixed schedule
Set a monthly or quarterly lane review. Look at each lane with enough loads, compare the approved carriers on carrier-caused late loads and extra cost, and decide whether the ranking still makes sense. Most months the answer is "no change." That is fine. The review exists so the change happens when it should, not after a customer complains to sales.
A hypothetical review meeting
Consider a hypothetical monthly review at a distributor. The logistics manager, a coordinator and someone from customer service meet for 30 minutes. They look at the five busiest lanes. On four, nothing changed. On the fifth, the first-ranked carrier had five carrier-caused late deliveries out of 22 loads, while the second-ranked carrier had one out of 9. The extra cost of the late loads was about the same as the rate gap. The team decides to keep the ranking for one more month, sends the first carrier the record and asks for a fix by the next review. Everyone leaves knowing what happens if the number does not move.
Bring customer service in
Customer service hears about late freight first, often before logistics. Their complaints are useful, but they need the record behind them. Bringing one person from customer service into the review keeps the conversation tied to facts and gives them a clear answer to pass on.
Treat a new carrier as a trial on the lane
When a carrier moves up on a lane, or a new carrier joins it, treat the first weeks as a trial. Keep a closer eye on pickups and deliveries, and set the review date when the change is made. A new carrier that performs well earns its place with a record, not a promise.
A checklist before you move a lane
| Check | Question |
|---|---|
| Definitions | Do we agree on what late pickup and late delivery mean? |
| Record | Do we have agreed times and actual times for every load in the period? |
| Causes | Did we separate carrier, shipper, receiver and outside causes? |
| Comparison | How do the other approved carriers on the lane compare? |
| Cost | What did late loads cost against the rate gap? |
| Conversation | Did the carrier see the record and get a chance to fix it? |
| Ranking | Is the new order written down where bookings happen? |
| Review | When will we look at the lane again? |
How does Wilson, by Cartage, handle a carrier that keeps running late?
Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays freight for manufacturers and distributors, using the ranked list of approved carriers the company sets for each lane. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.
Wilson works like a free logistics department with four parts: the labor, the data, the network and the payments.
The labor
The labor is the daily work around late freight. Wilson tracks each load with the best source available: a carrier API or EDI, GPS or ELD data where the carrier shares it, the carrier's website by PRO number, and email or phone calls when nothing else is current. When a pickup is missed or a delivery will be late, Wilson contacts the carrier, tells the team and tells the customer if configured. It can start rebooking from the approved carrier list automatically within the rules or after approval. Wilson follows up with carriers by phone and email, with persistence rules per carrier, until it gets an answer.
The data
The data is the record that makes a fair decision possible. Wilson keeps every load, quote, rate, appointment, carrier update and document on record as it works, with every message and change in the shipment's change history. It does not keep a permanent scorecard by default, but it can produce carrier-performance and lane-rate reports on request from the loads it runs. That gives the team the lane-by-lane record this article describes without building it by hand.
Booking runs on a ranked list of carriers per lane, a waterfall, plus decision rules by lane and mode. When the team changes the carrier on one load, Wilson treats it as a change to that load, not a permanent rule. If the same change keeps happening, Wilson asks the team whether to make it a rule; it never adopts it silently. Re-ranking a lane is the team's decision.
Wilson replaces the TMS for freight execution and connects to the company's ERP. Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.
The network
The network gives the shipper better freight rates on every lane, because its volume counts with every other Wilson customer's. The network includes carriers and brokers. When a lane needs a new option, Cartage can suggest additional carrier capacity, and the company approves each carrier before Wilson uses it. A new carrier appears only on the lanes where the company ranks it, so it can start on one lane while the team watches the record.
The payments
The payments part closes each load. Wilson audits every carrier invoice against the rate confirmation and the POD before money moves, then pays carriers from the Wilson Wallet. Invoices over the rate or outside the rules, such as a redelivery charge after a carrier-caused miss, wait for a person.
Control
The company starts with assisted execution and sets the approval limits. Routine actions run automatically within those rules as the workflow is proven. Timing depends on scope: most teams start on a few lanes and expand from there.
Pricing
Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.
FAQs
What does Wilson do when one carrier keeps running late?
Wilson, by Cartage, an AI logistics agent, tracks each load, handles late pickups and deliveries as exceptions and can produce carrier-performance reports on request from the loads it runs. The team uses that record to decide whether to re-rank the carrier on a lane. Wilson then books from the updated ranked list; it does not change the ranking on its own.
How many late loads justify replacing a carrier?
There is no single number. Compare the carrier's carrier-caused late rate with the other approved carriers on the same lane over the same period, and weigh the cost of late freight against the rate gap. A small sample needs more loads before a decision.
Should we drop the carrier from every lane?
Usually not. Most late patterns are lane-specific. Move the carrier down on the lanes where it fails and keep it where the record is good.
Does Wilson score carriers automatically?
No. Wilson does not keep a permanent scorecard or recurring benchmarking by default. It can produce carrier-performance and lane-rate reports on request from the loads it runs.
Can Wilson stop booking a carrier on one lane only?
Yes. Booking uses a ranked list of carriers per lane. The company can move a carrier down or off one lane and leave it in place on the others.
What if the late loads were our fault?
Then a new carrier will not fix them. Separate the causes of late loads before deciding. Product readiness, paperwork and dock scheduling are common shipper-side causes.
Should we talk to the carrier before moving the lane?
In most cases, yes. Share the lane record, ask what will change and set a review date. Move first only when a critical delivery was missed or the carrier stops answering.
How long should we review a carrier before deciding?
Long enough to see a normal mix of weeks and enough loads to be fair. Ninety days is a common starting point for a busy lane. Set the review date when the issue is raised.
Can Wilson suggest another carrier for the lane?
Cartage can suggest additional carrier capacity. The company approves each carrier before Wilson uses it, and the new carrier appears only on the lanes where the company ranks it.
Sources
- Cartage, Wilson product FAQ and product scope, October 2026: https://cartage.ai
Let's review the lanes where one carrier keeps running late. You don't need to prepare anything: Cartage maps the workflow with you on the call.
