The carrier missed the delivery appointment. Who pays the redelivery fee?
The carrier missed the delivery appointment. Who pays the redelivery fee?
A manufacturer ships a truckload to a customer's warehouse. The customer set a delivery appointment for 8:00 a.m. on Tuesday, and the shipper passed it to the carrier when it booked the load. On Tuesday the truck shows up at 1:30 p.m. The receiver turns it away: the afternoon is fully booked. The carrier delivers on Wednesday morning. Two weeks later, the carrier's invoice includes a redelivery fee and a layover charge. The customer, meanwhile, sends its own note about the late delivery.
The redelivery fee should be paid by whoever caused the missed appointment: the carrier when its truck was late or never showed, the receiver when it refused a truck that arrived on time, and the shipper when it gave the carrier the wrong appointment or a load that was not ready. The rate confirmation and the carrier's rules set the details, but the facts of the miss decide who is at fault. In most cases, those facts are in the appointment record.
The hard part is not the principle. It is the evidence. A redelivery dispute without a confirmed appointment time and an arrival time turns into a disagreement between the carrier's dispatcher and your coordinator. With the record, it takes one email.
What a redelivery fee is
A redelivery fee is an accessorial charge for a second delivery attempt. It covers the truck and driver making another trip, or waiting until the next open slot. It often comes with related charges:
- Layover. The truck waited overnight near the receiver.
- Storage. The freight went back to a terminal and sat there.
- Detention. The driver waited at the dock beyond the free time on the first or second attempt.
- Reconsignment. The freight was sent to a different address.
The amounts and the rules for each charge come from the carrier's tariff or the rate confirmation. Read them before you agree or dispute. A charge the rate confirmation does not allow is easier to reject.
Three parties, three possible causes
| Who caused the miss | Typical cause | Who should pay |
|---|---|---|
| Carrier | Truck arrived late, never showed, or the driver did not know the appointment time the carrier received | Carrier absorbs the redelivery |
| Receiver | Dock refused a truck that arrived on time, or the receiver changed the appointment without notice | Shipper may pay the carrier, then recover from the customer if terms allow |
| Shipper | Wrong appointment time given, load not ready, missing paperwork at pickup | Shipper pays |
The table shows the usual logic. Contracts and customer terms can change who pays in the end, so check yours.
Want to look at a real case?
Let's review your last missed appointment and the invoice that followed. You don't need to prepare anything: Cartage maps the workflow with you on the call.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.
Book a demo →How do you find out who caused the missed appointment?
Rebuild the timeline of the load from written records: when the appointment was set, when it was sent to the carrier, what the carrier confirmed, when the truck picked up, when it arrived and what the receiver said. The first gap or mismatch on that timeline usually shows the cause.
Step 1: Confirm the appointment that was set
Find the appointment the receiver gave: date, time, any window and the reference number. Note who set it and when. If the appointment was changed, note every change and who was told.
Step 2: Confirm what the carrier received
Check the rate confirmation and any later messages to the carrier. Did the appointment time appear in writing? Did the carrier confirm it? An appointment that was set but never sent to the carrier puts the fault back on the shipper.
Step 3: Check the pickup
Was the load ready on time? Did the driver wait at your dock? A late pickup caused by the shipper can make an on-time delivery impossible. If the driver waited three hours at your dock, the miss may not be the carrier's fault.
Step 4: Check the transit
Look at the check calls and tracking updates during transit. Did the carrier report a delay? When? A carrier that warned of a delay the day before, and asked for a new appointment, is in a different position from one that said nothing.
Step 5: Check the arrival
Find the driver's arrival time at the receiver. Sources include the carrier's tracking, the driver's logs, the receiver's gate log and the delivery receipt. If the truck arrived on time and the receiver refused it, the cause is at the receiver.
Step 6: Read the receiver's notes
Receivers often write a reason when they turn a truck away: late, no appointment, wrong PO, damaged freight. Ask the customer for the note if you do not have it.
Step 7: Write down the cause
Write one line: who caused the miss and why, with the evidence. That line goes with the dispute, the invoice review and any charge to the customer.
A timeline example
Consider the hypothetical load from the opening:
| Time | Event | Source |
|---|---|---|
| Thursday 10:00 a.m. | Receiver sets Tuesday 8:00 a.m. appointment | Customer email |
| Thursday 11:15 a.m. | Shipper books carrier; appointment on the rate confirmation | Rate confirmation |
| Thursday 11:40 a.m. | Carrier confirms the load and the appointment in writing | Carrier email |
| Monday 2:00 p.m. | Truck picks up on time | BOL signed at shipper dock |
| Monday 9:00 p.m. | Check call: on schedule | Carrier update |
| Tuesday 6:30 a.m. | No update; carrier does not answer follow-up | Call log |
| Tuesday 1:30 p.m. | Truck arrives; receiver refuses: appointment missed | Receiver note |
| Wednesday 7:45 a.m. | Delivered | POD |
The appointment was in writing, confirmed by the carrier, and the load left on time. The truck arrived five and a half hours late without a warning. The carrier caused the miss. The redelivery fee and layover should not be paid.
When the fault is shared
Not every miss has one clear cause. A truck may leave your dock two hours late because the load was not ready, then lose another three hours in traffic. The carrier may warn of a delay at 6:00 a.m. for an 8:00 a.m. appointment, too late for the receiver to offer another slot. In cases like these, look at what each party could have done. Could the carrier have made the appointment if the pickup had been on time? Did the shipper or receiver ignore a warning that came early enough to act on? A fair outcome may be a split charge, or the carrier dropping the layover while the shipper pays the redelivery. Write down the reasoning, so the same case gets the same answer next time.
LTL redelivery works differently
On LTL, the freight usually goes back to the carrier's terminal after a failed attempt, and the carrier schedules a new delivery from there. Charges may include redelivery, storage after a set number of free days and an appointment fee if the receiver requires one. Many LTL carriers also need an appointment request before they will schedule delivery to a dock that takes appointments only. If that request was never made, the miss may not be the carrier's fault. Check the bill of lading and the booking: if "appointment required" was not marked, the carrier may not have known.
What evidence settles a redelivery dispute?
Four records settle most redelivery disputes: the confirmed appointment, the carrier's written acceptance of it, the arrival time and the receiver's reason for refusal. Everything else supports those four.
The core records
- The appointment confirmation. The receiver's email or a dock calendar entry with the date, time and reference number.
- The rate confirmation. It should list the appointment and the accessorial terms. If the appointment is on it, the carrier agreed to it.
- Arrival time. From tracking, check calls, the driver's logs or the receiver's gate log. More than one source is better.
- The receiver's note. The reason the truck was refused, written on the delivery receipt or sent by email.
Supporting records
- Check calls and tracking updates. They show whether the carrier warned of a delay.
- Pickup records. The BOL signature time and any detention at your dock.
- Messages about changes. Any request to move the appointment, and the answer.
- The POD from the second attempt. It shows when the freight finally arrived.
For a deeper look at which records hold up when the question is time at a dock, see appointment records that support a detention charge. The same records answer most redelivery disputes.
Why records go missing
Most teams have the evidence somewhere. It is spread across a shared inbox, a phone log, a carrier's website and the customer's email. By the time the invoice arrives, the coordinator who handled the load may not remember where each piece is. The fix is to save each record on the load as it happens, not to search for it later.
How to dispute the charge
Send the carrier one short message:
- The load reference, PRO number and invoice number.
- The charge you are disputing and the amount.
- The appointment, when it was confirmed and by whom.
- The arrival time and the receiver's reason for refusal.
- What you will pay: the agreed line haul and any charges the record supports.
Attach the records. Keep the tone factual. A clear dispute with dates and times gets a fast answer. A vague one gets a request for more information.
When the carrier pushes back
If the carrier disagrees, ask for its evidence: its arrival time, its own check calls, any message showing it warned of the delay or asked for a new time. Compare the two sets of records. If the carrier's records show the receiver refused a truck that arrived on time, the cause is at the receiver, and the question moves to the customer.
What mistakes make redelivery fees keep coming back?
Redelivery fees repeat when the appointment does not reach the driver, when transit plans leave no room for delay and when charges are paid without checking. Each mistake has a fix.
Mistake 1: The appointment never reaches the driver
The shipper sends the appointment to the carrier's dispatch. Dispatch never passes it to the driver. The driver arrives on a normal schedule and misses the window. Fix: put the appointment on the rate confirmation, ask the carrier to confirm it in writing and check again the day before delivery. If you have the driver's number, confirm with the driver directly.
Mistake 2: Appointment changes that nobody passes on
The customer moves the appointment, and the update stays in customer service's inbox. The carrier arrives at the old time. Fix: every appointment change goes to the carrier in writing, with confirmation. See what happens when the delivery appointment changed and nobody told the carrier.
Mistake 3: No check call before delivery
A truck running late is often known hours before the appointment. Without a check call, nobody asks for a new time, and the receiver refuses the truck. Fix: check status the evening before and the morning of delivery on every appointment load.
Mistake 4: Paying accessorials on sight
If redelivery, layover and storage charges are paid as they appear, the carrier has no reason to avoid them. Fix: hold any accessorial that was not on the rate confirmation and ask the carrier why it applies. For how a disputed charge moves to the right person, see who approves a disputed charge before payment.
Mistake 5: Not passing the cost to the right party
When the receiver caused the miss, many shippers pay the carrier and absorb the cost. If customer terms allow, the charge can go to the customer with the evidence. Without the record, it cannot.
Mistake 6: Treating a repeat as bad luck
If one carrier misses appointments on one lane again and again, it is a pattern. Look at the record per lane and talk to the carrier, or change who is first on that lane.
Decision guide
| Finding | Decision on the redelivery charge |
|---|---|
| Appointment confirmed in writing; truck late with no warning | Dispute; pay line haul only |
| Carrier warned of a delay and asked for a new time; shipper or receiver did not respond | Review case by case; may be shared |
| Truck on time; receiver refused | Pay the carrier if the record supports it; recover from the customer if terms allow |
| Shipper gave the wrong appointment time | Pay; fix the handoff |
| Load not ready at pickup and the delay caused the miss | Pay; review dock readiness |
| No appointment record at all | Hard to dispute; fix record keeping first |
What checklist prevents missed delivery appointments?
Prevent most misses with a short routine: set the appointment early, send it in writing, confirm it twice and check status before arrival. The checklist below covers each step and who owns it.
Before pickup
| Item | Question to answer | Owner |
|---|---|---|
| Appointment set | Does the receiver need an appointment, and is it booked? | Logistics or customer service |
| Appointment on the rate confirmation | Does the carrier's rate confirmation show the date, time and reference? | Logistics |
| Carrier confirmation | Did the carrier confirm the appointment in writing? | Logistics |
| Transit check | Does the transit time leave room for a delay before the appointment? | Logistics |
| Receiver hours | Are the receiving hours and rules on record? | Customer service |
During transit
| Item | Question to answer | Owner |
|---|---|---|
| Pickup on time | Did the truck pick up when planned? | Logistics |
| Evening check | Is the truck on schedule the night before delivery? | Logistics |
| Morning check | Is the truck on schedule the morning of delivery? | Logistics |
| Delay plan | If late, has a new appointment been asked for before the old one passes? | Logistics |
| Customer notice | Has the customer been told about any delay? | Customer service |
After delivery
- Save the POD and the receiver's notes on the load.
- If an attempt failed, write down the cause with evidence the same day.
- When the invoice arrives, check each accessorial against the rate confirmation and the record.
- Hold any charge the record does not support and ask the carrier to explain it.
- If the receiver caused the miss, send the cost and evidence to the customer, if terms allow.
Review monthly
Once a month, list every redelivery, layover and storage charge. Group them by cause, carrier and receiver. A few receivers or one carrier lane often account for most of them. Fix those first. A receiver with strict windows may need earlier pickups. A carrier that keeps missing one lane may need a direct conversation, or a lower place on that lane's list.
How does Wilson, by Cartage, handle missed appointments and redelivery fees?
Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks and pays freight for manufacturers and distributors, and it keeps the appointment record and checks each invoice before any redelivery charge is paid. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward. Think of it as a free logistics department: what big shippers build over years, Wilson does from day one, in four parts.
The labor. Wilson does the work from the first quote to the final POD: quotes, bookings, paperwork, tracking and carrier follow-ups, by email, phone calls, texts, Slack and Microsoft Teams. It books with written acceptance and a rate confirmation, and it can set appointments from the details on the bill of lading. Wilson can read and create appointments in a connected dock calendar. It tracks each load with the best source available: a carrier API or EDI, GPS or ELD data where the carrier shares it, the carrier's website by PRO number, and email or phone calls when nothing else is current. Wilson usually talks to the carrier's dispatch and can call or text a driver directly when it has the driver's number. When a load is running late, Wilson contacts the carrier, tells the team and tells the customer if configured. It follows up with carriers by phone and email until it gets an answer.
The data. Wilson keeps every order, load, quote, rate, document and contact on record as it works, connected to the company's ERP. Wilson replaces the TMS for freight execution and connects to the company's ERP. The appointment, the carrier's confirmation, check calls and the POD sit on the same load. Every message, confirmation and change is kept in the shipment's change history, which is the evidence a redelivery dispute needs. Wilson can also keep receiver rules the team can edit, such as a dock that takes appointments only in the morning.
Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.
The network. Wilson gets better freight rates on every lane because the shipper's volume counts with every other Wilson customer's. The network includes carriers and brokers. The company still approves who hauls its freight, and Wilson books from a ranked list of approved carriers per lane, so a lane where one carrier keeps missing appointments can be re-ranked by the team.
The payments. Wilson audits every carrier invoice against the rate confirmation and the POD before money moves, then pays carriers from the Wilson Wallet. A redelivery or layover charge that was not agreed, or an invoice over the rate, is held and flagged for a person. If the carrier sends a second invoice for the same load, a duplicate is attached rather than paid twice, and a new invoice number repeating a charge already billed is raised with the carrier.
Control stays with the company. Wilson starts with assisted execution, the company sets approval limits, and routine actions can run automatically within those rules as the workflow is proven.
Pricing
Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract. Timing depends on scope: most teams start on a few lanes and expand from there.
FAQs
What does Wilson do when a carrier misses a delivery appointment?
Wilson, by Cartage, an AI logistics agent, contacts the carrier, tells the team and tells the customer if configured. It keeps the appointment, the carrier's confirmation and the check calls on the load. When the invoice arrives, it holds any redelivery charge that falls outside the rules for a person to review.
Who pays the redelivery fee when the carrier was late?
If the appointment was confirmed in writing and the truck arrived late without a warning, the carrier caused the miss and should absorb the redelivery fee. The shipper pays the agreed line haul. Check the rate confirmation and the carrier's terms for details.
Who pays if the receiver refused a truck that was on time?
The carrier may still bill the shipper, because the carrier did its part. If the customer's terms allow, the shipper can pass that cost to the customer with the evidence: the appointment, the arrival time and the receiver's note.
What evidence do we need to dispute a redelivery charge?
The confirmed appointment, the carrier's written acceptance of it, the driver's arrival time and the receiver's reason for refusing the truck. Check calls and the rate confirmation support those four records.
Should the delivery appointment be on the rate confirmation?
Yes. When the appointment is on the rate confirmation, the carrier agreed to it in writing. That makes disputes much simpler and helps the appointment reach the driver.
What is the difference between redelivery and layover?
A redelivery fee covers a second delivery attempt. A layover charge covers a truck waiting overnight, often near the receiver, until it can deliver. Both can appear on the same invoice after a missed appointment.
How can we stop missed appointments before they happen?
Send the appointment in writing, ask the carrier to confirm it and check status the evening before and the morning of delivery. If the truck is late, ask the receiver for a new time before the old one passes.
Can Wilson reschedule a delivery appointment?
Wilson can read and create appointments in a connected dock calendar. For receivers that schedule by email or phone, it can follow up under the company's workflow. It does not work in third-party dock-scheduling portals.
What if the carrier sends a second invoice for the redelivery?
Wilson treats a duplicate with the same number and amount as a resend and attaches it, not pays it twice. A new invoice number that repeats a charge already billed is raised with the carrier.
How often should we review redelivery charges?
Monthly is enough for most teams. Group the charges by cause, carrier and receiver. A small number of lanes or receivers usually account for most of them.
Sources
- Cartage, Wilson product FAQ and product scope, October 2026: https://cartage.ai
Let's review your last missed appointment and the invoice that followed. You don't need to prepare anything: Cartage maps the workflow with you on the call.
