When do we need a liftgate, and how do we stop paying for ones we didn't use?

Freight invoice audit and payment guideNov 17, 202617 min read

When does a shipment need a liftgate?

A manufacturer ships two pallets of equipment to a contractor's office. The booking is a standard LTL shipment, dock to dock. When the truck arrives, there is no dock and no forklift, only a parking lot and a front door. The driver cannot unload. The carrier takes the freight back to the terminal, schedules a second attempt with a liftgate truck and bills a liftgate fee plus a redelivery charge. A month later, a different invoice shows a liftgate charge on a shipment to a warehouse that has six dock doors. Nobody can say whether the liftgate was used.

A shipment needs a liftgate when the pickup or delivery location has no loading dock and no forklift that can reach into the trailer, and the freight cannot safely be unloaded by hand. The liftgate is a powered platform on the back of the truck that lowers pallets from the trailer floor to the ground. Carriers usually charge for it as an accessorial because it requires specific equipment and adds time at the stop.

Common cases where a liftgate is needed:

  • Small businesses and offices with a front door and no dock.
  • Retail storefronts that receive freight at street level.
  • Construction and job sites without equipment on hand.
  • Residential deliveries, which usually also carry a residential fee.
  • Schools, churches and other public buildings without a receiving area.
  • Pickups from a site without a dock, such as a small supplier or a trade show.

Cases where a liftgate is usually not needed:

  • The site has a dock at trailer height.
  • The site has a forklift and the driver can pull up to a level area for unloading.
  • The freight is light enough to unload by hand, and the receiver agrees to do it.

Why the answer belongs to each address

Whether a liftgate is needed depends on the location, not the customer. A distributor may have a dock at its main warehouse and no dock at its branch stores. A manufacturer may ship to the same customer's plant (dock) and to its field office (no dock). The right unit for the decision is the delivery address.

What a liftgate does not solve

A liftgate gets the pallet from the trailer to the ground. It does not move the pallet inside, up stairs or across gravel. If the receiver needs the freight brought inside, that is usually a separate inside-delivery service. If the ground is soft or sloped, the driver may not be able to use the liftgate safely. Ask about the surface, not only the dock, for sites like job sites and rural properties.

What it costs when the booking is wrong

A missed liftgate costs more than the liftgate fee. The first delivery attempt fails, so the carrier may add a redelivery charge, and sometimes storage while the freight waits at the terminal. The customer gets its order a day or more late. Someone on the team spends time on calls with the carrier and the customer to reschedule. A liftgate booked for a site that did not need it costs less in time, but it repeats on every shipment to that address until someone notices. Over a year, a handful of wrong address records can add up to a real line on the freight budget.

Liftgate trucks are not always available

Not every truck in a carrier's fleet has a liftgate. A terminal may have only a few. When the booking requests one, the carrier plans the right truck for the delivery route. When the request comes late, on the day of delivery or after a failed attempt, the carrier may not have a liftgate truck free until the next day. That is one more reason to get the dock question answered before the first shipment, not at the curb.

Let's review the liftgate charges on last month's invoices. You don't need to prepare anything: Cartage maps the workflow with you on the call.

See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.

Book a demo →

How do you book liftgates correctly the first time?

Ask about the dock once for every new address, record the answer on that address and add or leave off the liftgate from the record, not from memory, on every booking. Most liftgate problems disappear when the dock question has a written answer.

Step 1: Ask the right questions for a new address

For any new pickup or delivery location, ask:

  • Is there a loading dock at trailer height?
  • Is there a forklift or pallet jack that can unload from a trailer?
  • Can a full-size trailer reach the site, or does it need a smaller truck?
  • What is the surface at the unloading area: paved, gravel, sloped?
  • Does the freight need to go inside, beyond the door?
  • What are the receiving hours, and does the site need an appointment?

The person who places the order often does not know. Ask the person who receives freight at that address. A short email or text with these questions, sent before the first shipment, saves a failed delivery.

Step 2: Record the answer on the address

Store the dock details on the delivery address record, where the next person booking a shipment will see them. A note in an old email thread does not count. The record should say plainly: "No dock, no forklift: liftgate required" or "Dock at trailer height: no liftgate."

Step 3: Book with the services the address needs

When the shipment is quoted, include the liftgate in the quote request if the address needs it. A quote without the liftgate will look cheaper, but the invoice will not be. Comparing quotes with different services hides the real cost. The article on checking accessorial charges before booking explains why that comparison matters.

Step 4: Put the liftgate on the bill of lading

The BOL should show the liftgate service and any other special services. The driver and the delivering terminal work from the paperwork. If the liftgate is only in an email to the carrier's sales rep, the delivery truck may still show up without one.

Step 5: Confirm with the receiver for unusual sites

For job sites, homes and other unusual locations, confirm the delivery window and the unloading plan with the receiver before the truck arrives. A liftgate truck that arrives when nobody is there to sign leads to a redelivery.

Step 6: Check the rate confirmation

The rate confirmation should show the liftgate charge if it was requested. That is the number the invoice will be checked against. If the rate confirmation leaves it out, ask the carrier to correct it before pickup.

Pickup liftgates

Liftgates are not only for delivery. A pickup from a site without a dock needs one too, and some carriers charge for pickup and delivery liftgates separately. Record dock details for pickup locations the same way, especially suppliers, returns and trade show sites.

Why do liftgate charges show up when nobody used a liftgate?

Unused liftgate charges usually come from one of five places: a default on the carrier's side, a booking that requested it by mistake, a terminal that sent a liftgate truck just in case, a billing error or a misread of the delivery. Each one is checked differently.

Cause 1: The booking requested it

Sometimes the team asked for a liftgate the shipment did not need. The address record was wrong, or someone added it to be safe. In that case, the charge matches the booking and the carrier will usually expect payment. The fix is the address record, not a dispute.

Cause 2: The carrier applied it by default

Some carriers apply a liftgate charge automatically to certain delivery types, such as residential or limited-access addresses, unless the shipper states otherwise. Read the carrier's rules for the lane. If the default was applied to a site with a dock, the BOL and the receiver's records are the evidence.

Cause 3: The terminal sent a liftgate truck

A delivering terminal may send a liftgate-equipped truck because that is what it had available. The receiver used its dock. The invoice still shows the liftgate. This charge should not stand if the service was not requested and not used.

Cause 4: A billing error

The charge was added to the wrong shipment, duplicated or carried over from a previous shipment to the same address. These usually show up as a liftgate on one invoice that matches another shipment's details.

Cause 5: A failed first attempt

The first delivery attempt failed because the driver had no liftgate. The second attempt used one. The invoice may show a liftgate, a redelivery fee and sometimes storage. Here the question is why the booking missed the liftgate. If the address record said "dock" and the site has no dock, the record needs fixing and the cost conversation may be with the customer. If the record said "liftgate" and the booking dropped it, the fix is internal.

How to tell which one it is

Evidence What it suggests
Liftgate on the booking and on the rate confirmation The charge was requested; pay it and check the address record
Liftgate on the invoice, not on the booking or BOL Carrier default, terminal choice or billing error; question it
POD signed at a dock door or by a warehouse with docks Liftgate likely not used; question it
POD notes "liftgate used" or the driver's notes say so Service was used; check whether the booking should have included it
Redelivery fee on the same invoice A first attempt failed; find out why before paying both charges
Same liftgate charge on two invoices for one shipment Duplicate; raise with the carrier

Ask the carrier before paying

When a liftgate charge does not match the booking, ask the carrier for the reason and any delivery records showing the liftgate was used. Most carriers will remove an unrequested charge for a site with a dock when shown the BOL and the address details. Questioning the charge after payment is slower and less likely to work. For a broader look at matching charges to what actually happened, see the freight audit process for accessorial charges.

What rules should decide whether to pay, dispute or pass on a liftgate charge?

Check each liftgate charge against three documents, the booking, the rate confirmation and the POD, then decide by rule. A short set of rules keeps the decision consistent and fast.

The three-document check

  1. Booking: Did the shipment request a liftgate?
  2. Rate confirmation: Did the carrier agree to a liftgate at a stated price?
  3. POD and delivery notes: Is there evidence a liftgate was used, or that the delivery was at a dock?

If all three agree, the decision is easy. If they disagree, the charge needs a person.

Decision rules

Booking Rate confirmation POD and notes Decision
Liftgate requested Liftgate at agreed price Any Pay at the agreed price
Liftgate requested Liftgate at agreed price Invoice higher than agreed price Hold and ask the carrier why
Not requested Not listed Delivered at a dock Question the charge; ask for removal
Not requested Not listed Liftgate used, site has no dock Pay or negotiate; fix the address record; check customer terms
Not requested Not listed First attempt failed, liftgate on second Review why the booking missed it before paying redelivery
Not requested Not listed No delivery notes Ask the carrier for delivery records before paying

Who pays: carrier, shipper or customer

If a liftgate was needed because of the customer's site, many shippers pass the cost to the customer under their freight terms. That only works if someone records the charge against the order and sales has agreed the terms. The guide on billing customers for carrier accessorials covers that process.

If the liftgate was needed because the team booked it wrong, the cost usually stays with the shipper. The lesson goes into the address record so it does not repeat.

If the carrier added a liftgate that was not requested or used, the carrier should remove it.

Mistakes that keep liftgate charges coming

  • Booking from memory. The coordinator who knows which customers have docks goes on vacation, and the next person guesses.
  • Leaving the liftgate off quotes to win on price. The quote looks cheaper and the invoice is higher. Always quote the services the address needs.
  • Adding a liftgate to every shipment to be safe. It avoids failed deliveries and guarantees a charge on every shipment, even to sites with docks.
  • Paying invoices in bulk without checking accessorials. Small charges like liftgates are easy to miss when only the total is reviewed.
  • Fixing the invoice but not the address record. The same charge appears next month.
  • Not telling sales. If a customer's site always needs a liftgate, the freight terms for that customer should reflect it.

A hypothetical month

Consider a hypothetical distributor that reviews a month of LTL invoices and finds 42 liftgate charges. Twenty-eight were requested and needed. Six were requested for sites that have docks, because the address records were wrong. Five were on invoices for shipments that did not request one and delivered to docks. Three followed failed first attempts at sites the team had marked as having a dock. The team pays the 28, corrects six address records, questions the five charges with the carriers and contacts the three customers to confirm their sites. None of this needed a new carrier or a new rate. It needed a check against the booking and the POD.

What should a liftgate checklist include?

One checklist for booking and one for paying. Together they close the gap between what was asked for and what was billed.

At booking

  • Delivery address has dock details on file.
  • Pickup address has dock details on file.
  • Liftgate requested only where the record says it is needed.
  • Residential, limited-access or inside delivery flagged separately.
  • Quote request includes every service the address needs.
  • Quotes compared on total cost with the same services.
  • BOL shows the liftgate and any special services.
  • Rate confirmation lists the liftgate charge.
  • Receiver contacted for unusual sites before delivery.

Before paying

  • Invoice liftgate charge compared to the rate confirmation.
  • Unrequested liftgate checked against the POD and delivery notes.
  • Redelivery or storage charges traced to their cause.
  • Duplicate liftgate charges for one shipment raised with the carrier.
  • Charges outside the rules held for a person.
  • Address record corrected if the booking was wrong.
  • Customer charge recorded where freight terms allow it.

Keeping address records current

Sites change. A customer moves its receiving to a new building, a store adds a dock, a job site finishes. When a delivery reveals that the record was wrong, update it the same day. When a customer tells sales about a move, sales should tell logistics. A quick review of the addresses with the most liftgate charges each quarter catches most changes.

What to measure

Track three numbers each month: liftgate charges paid, liftgate charges questioned and the share questioned that carriers removed. If the questioned share stays high, the address records or the carrier defaults need attention. If failed first attempts keep appearing, the dock questions are not being asked for new addresses.

How does Wilson, by Cartage, handle liftgate charges?

Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays freight for manufacturers and distributors, and it checks liftgate charges at both ends of the load: at booking and before payment. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.

Wilson works like a free logistics department with four parts: the labor, the data, the network and the payments.

The labor

Wilson does the labor from the first quote to the final POD. It requests quotes from the company's approved carriers with the services the shipment needs and compares them on total cost, so a quote without a needed liftgate does not win on a false price. It books with written acceptance and a rate confirmation, generates the bill of lading with the services listed and schedules the pickup. If an order arrives without a detail Wilson needs, such as whether the site has a dock, it holds the order as pending, asks for the missing detail and tells the team. It never invents the missing value.

The data

Wilson keeps every order, load, quote, rate, document and contact on record as it works. That is the data. A delivery address that needs a liftgate, or a receiver that takes deliveries only in the morning, can be kept as a rule the team can see and edit. When the team changes something on one load, Wilson treats it as a change to that load. If it looks like it should become a rule, Wilson asks the team first. Every message, confirmation and change is kept in the shipment's change history.

Wilson keeps every load, rate and document on record, so teams don't need a TMS. Wilson replaces the TMS for freight execution and connects to the company's ERP. Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.

The network

The network gives the shipper better freight rates on every lane, because its volume counts with every other Wilson customer's. The network includes carriers and brokers, and the company still approves who hauls its freight.

The payments

The payments part is where unused liftgates get caught. Wilson audits each carrier invoice against the rate confirmation and the POD before money moves. A liftgate charge that was not on the rate confirmation, or an invoice over the agreed rate, is held and flagged for a person, and Wilson asks the carrier why before paying. A duplicate invoice is attached as a resend, not paid twice. Matching invoices are paid from the Wilson Wallet. Payments above the approval limits or outside the rules wait for a person.

Control

Wilson starts with assisted execution. The company sets approval limits, and routine actions run automatically within those rules as the workflow is proven. Teams reach Wilson by email, Slack, Microsoft Teams, text, WhatsApp or phone. Timing depends on scope: most teams start on a few lanes and expand from there.

Pricing

Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.

FAQs

Can Wilson catch liftgate charges we didn't use?

Wilson, by Cartage, an AI logistics agent, audits each carrier invoice against the rate confirmation and the POD before payment. A liftgate charge that was not on the rate confirmation is held and flagged for a person, and Wilson asks the carrier why before paying. The team decides whether to dispute, pay or pass the cost to the customer.

When is a liftgate required?

When the pickup or delivery site has no loading dock and no forklift that can unload from the trailer, and the freight is too heavy to unload by hand. Offices, storefronts, job sites and homes are common examples.

Do I need a liftgate for a residential delivery?

Usually, yes, because homes rarely have a dock or forklift. Residential deliveries often carry a separate residential fee as well. Confirm with the carrier and the receiver.

Who pays for the liftgate?

The shipper pays the carrier. Whether the shipper passes the cost to its customer depends on the customer's freight terms. Record the charge against the order so sales and finance can bill it if the terms allow.

What if the carrier added a liftgate we did not request?

Compare the invoice to the booking, the rate confirmation and the POD. If the service was not requested and the delivery was at a dock, ask the carrier to remove the charge before paying.

Why was our shipment refused for no liftgate?

The booking did not include a liftgate and the site had no dock or forklift. The carrier will usually reattempt with a liftgate truck and bill the liftgate plus redelivery. Update the address record so it does not repeat.

Is a liftgate the same as inside delivery?

No. A liftgate lowers the pallet to the ground. Inside delivery moves it into the building, which is a separate service and charge.

Should we request a liftgate on every shipment to be safe?

No. That guarantees a charge on shipments to sites with docks. Record dock details per address and request the liftgate only where it is needed.

How do we stop the same liftgate mistake from repeating?

Fix the address record the same day the problem shows up, and check it on every booking. When Wilson sees a change that looks like it should become a rule, it asks the team before adopting it.

Sources

Let's review the liftgate charges on last month's invoices. You don't need to prepare anything: Cartage maps the workflow with you on the call.

Add Cartage as a preferred source on Google