The customer is sending its own truck. Who coordinates a will-call pickup?

Freight pickups guideNov 16, 202617 min read

The customer is sending its own truck. Who coordinates a will-call pickup?

A distributor emails customer service on Monday: "Our carrier will pick up PO 4471 on Thursday." No pickup number, no carrier name, no time. On Tuesday afternoon a driver arrives at the plant with a different PO number written on a notepad, asking for "the order for the distributor." The warehouse lead can't find an appointment. Customer service is at lunch. The order is half-staged because nobody expected it until Thursday.

When a customer sends its own truck, the customer or its carrier coordinates the transport, and the shipper coordinates the pickup: one named person at the shipper collects the routing details, confirms the ready time, sets the appointment, prepares the bill of lading and releases the freight only when the driver matches what the customer sent. That split is simple to say and easy to lose in practice, because the pickup sits between sales, customer service, the warehouse and logistics, and the carrier answers to someone outside the company.

What makes a customer-routed pickup different

On a prepaid shipment, the shipper picks the carrier, books it and pays it. The shipper's logistics team has a contract, a rate confirmation and a contact. On a customer-routed or collect shipment, the customer picks the carrier. The shipper has no rate confirmation, often no contact at the carrier and no say in when the truck is dispatched. The freight still leaves from the shipper's dock, and the shipper's name is still on the bill of lading.

That is why customer pickups often feel harder than booked ones. The shipper is responsible for being ready but does not control the truck. The guide on prepaid, collect and third-party freight terms explains how the terms themselves work. This article is about who does the coordination.

Three kinds of customer pickup

The same word covers different situations:

  • Customer's own fleet. The customer sends its own truck and driver. The customer's transport team is the contact.
  • Customer-routed carrier. The customer books a carrier from its own routing guide and the carrier collects. The carrier's dispatch and the customer's logistics team are both contacts.
  • Counter or walk-in pickup. Someone from the customer comes with a van or pickup truck for a small order. The customer's buyer is usually the contact.

Each one needs the same basic steps, but the contact and the paperwork differ. A customer's own fleet may not need a carrier PRO number. A customer-routed carrier almost always does.

Want to test your own process?

Let's review how your customer pickups get scheduled today. You don't need to prepare anything: Cartage maps the workflow with you on the call.

See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.

Book a demo →

How should a customer-routed pickup work from order to signed BOL?

A customer pickup works best as six steps with one owner: mark the order, collect routing details, confirm the ready time, set the appointment, prepare the documents and close the order with a record the customer can see. The physical dock steps, such as staging, loading and signature, are covered in how to manage customer will-call pickups. Here the focus is on who talks to whom.

Step 1: Mark the order as customer-routed at entry

The moment an order is entered, it should say who arranges the freight. If customer service learns on Wednesday that the customer is sending its own truck, the warehouse may already have planned the order for a booked carrier. Put the freight terms and the words "customer pickup" on the order, so logistics does not quote or book a carrier for it.

Step 2: Collect the routing details

Before anyone confirms a pickup, the shipper needs:

  • The carrier's name, or confirmation that it is the customer's own fleet.
  • A pickup number or reference the driver will give at the dock.
  • A contact at the carrier's dispatch, with phone and email.
  • The bill-to party for the freight bill, with the customer's account number at the carrier if it has one.
  • Any special requirements: equipment type, liftgate, seal, load bars or a temperature setting.

If the customer's first message is missing any of these, ask once, in one message, listing every gap. Don't confirm an appointment until the pickup number and carrier are known.

Step 3: Confirm the ready time to the customer

The customer should hear a ready date and time from the shipper, not guess it from the order due date. Confirm what will be ready, how many pallets or pieces, and the weight. If the order is partly ready, say so, and ask whether the customer wants to wait or pick up in two trips.

Step 4: Set the appointment

Give the customer or its carrier an appointment window that the dock can handle. If the plant uses a dock calendar, the appointment goes in it with the pickup number. Send the confirmation to the customer and the carrier contact. A good confirmation answers the questions in what a pickup confirmation should include: date, window, address, dock hours, reference numbers and who to call.

Step 5: Prepare the documents

Have the bill of lading, the packing list and any labels ready before the truck arrives. The BOL should show:

  • The shipper and consignee.
  • The carrier name, as given by the customer.
  • The freight terms: collect, third party or prepaid, as agreed.
  • The bill-to party, if it is not the consignee.
  • The pickup number and the customer's PO.
  • Piece count, weight, description and, for LTL, freight class.

Many customer-routed carriers bring their own BOL, or the customer issues one. Decide in advance which BOL is used, and check that its details match the order. Two BOLs with different weights for the same load cause disputes later.

Step 6: Release, record and tell the customer

When the driver arrives, check the carrier, the pickup number and the order. Load, count, sign and keep a signed copy. Then tell the customer the freight left, with the time, piece count and BOL. Close the order in the ERP with the carrier and pickup reference so billing and customer service can answer questions later.

A hypothetical walk-through

Consider a hypothetical shipper with a customer that sends its own carrier for three orders a week:

  • Monday: order entered with "collect, customer pickup." Customer service sends the customer a request for the carrier, pickup number and contact.
  • Tuesday morning: the customer replies with the carrier and a pickup number. The coordinator confirms a ready time of Wednesday at 10:00 a.m. for 12 pallets.
  • Tuesday afternoon: the coordinator sets a Wednesday 10:00 to 12:00 window and sends the confirmation with the dock address and hours.
  • Wednesday: the BOL shows collect terms, the customer's carrier and the pickup number. The driver arrives at 10:40 with the matching number. The freight is released, and the customer gets the signed BOL by email.

Every step had one owner, and each message went to one place.

What is the shipper still responsible for when the customer hires the carrier?

The shipper is responsible for having the right freight ready at the agreed time, with accurate paperwork, and for releasing it only to the right driver. It is usually not responsible for the carrier's rate, schedule or payment. The gray areas, such as damage and delays, depend on the sales terms and the facts of the load.

What stays with the shipper

  • Readiness. If the freight isn't ready at the appointment, the customer's carrier may bill the customer for waiting or a wasted trip, and the customer will ask the shipper to cover it.
  • Accurate paperwork. Weight, piece count, description and class on the BOL drive the customer's freight bill. If the shipper's BOL understates the weight, the customer may face a reweigh charge it blames on the shipper.
  • Loading and packaging. The shipper usually loads the truck. Freight that shifts or is damaged because of how it was packed or loaded can come back to the shipper.
  • Labels and customer requirements. Many customers require their own pallet labels, packing lists or ASN references, even on loads they arrange.
  • Release control. Handing the freight to the wrong driver is the shipper's problem, whatever the terms.
  • Records. The shipper needs proof of when the freight left, how many pieces and in what condition.

What moves to the customer

  • Carrier choice and booking. The customer picks and books the carrier.
  • Rate and payment. The carrier bills the customer or the third party named on the BOL.
  • Transit and delivery. Tracking the load after pickup and dealing with delivery issues is mostly the customer's job, though the customer may still ask the shipper for help.

The gray areas

Damage in transit. Who files a claim depends on who carries the risk under the sales terms, not only on who booked the truck. Check the terms of sale with finance and sales, and write the answer into the customer setup. Whoever files needs evidence from the shipper's dock: the signed BOL, piece count, photos of the loaded freight and seal number if one was used. Under federal law, carriers must give claimants at least nine months to file a claim for loss or damage and at least two years to sue after a claim is declined (49 U.S.C. 14706), and the shipper's records may be needed long after the pickup.

Delays caused by the shipper. If the customer's carrier waits two hours because the order isn't ready, the carrier bills the customer for detention. Whether the shipper reimburses the customer is a commercial question. Write the rule down instead of deciding it case by case.

Short or over shipments. If the driver signs for 12 pallets and the customer receives 11, the signed BOL and dock records decide where the gap happened.

Who does what, at a glance

Task Shipper Customer Customer's carrier
Choose and book the carrier Owns Accepts the load
Give routing details and pickup number Owns Provides pickup number to the customer
Confirm ready time and quantity Owns Receives Receives from customer or shipper
Set the dock appointment Owns Agrees Agrees
Prepare BOL, packing list and labels Owns, unless the customer issues the BOL Provides label rules May bring its own BOL
Check the driver and release the freight Owns Presents pickup number
Pay the carrier Owns, or the named third party Bills the bill-to party
Track to delivery Informs if asked Owns Provides updates
Evidence for claims Keeps dock records Files, depending on sales terms Inspects and responds

What goes wrong with customer-arranged pickups, and how do we prevent it?

Most problems with customer pickups come from missing details, unclear ownership at the shipper and paperwork that doesn't match the terms. Each one has a simple fix.

Mistake 1: Confirming a pickup with no pickup number

Without a reference, the dock has no way to tell the right driver from any other. Make a pickup number a required field before any appointment is confirmed.

Mistake 2: Nobody owns the customer's carrier

The carrier's dispatch calls the main number, gets the warehouse, then gets voicemail. Name one owner for each customer pickup and give the carrier that person's direct contact.

Mistake 3: Wrong freight terms on the BOL

If the BOL says prepaid when the customer agreed to collect, the carrier may bill the shipper. Check the terms box and bill-to party against the order before the driver signs.

Mistake 4: The customer isn't told the order slipped

The shipper knows on Tuesday the order won't be ready until Friday. Nobody tells the customer. The customer's carrier shows up Wednesday and bills a wasted trip. Any change to the ready time should go to the customer the same day.

Mistake 5: Releasing freight to an unexpected truck

A driver arrives without an appointment and says the customer sent them. Releasing the freight on that basis is how loads go missing. Stop, call the customer's contact and check the carrier and pickup number before loading.

Mistake 6: Two BOLs that don't agree

The carrier brings a BOL with one weight; the shipper prints another with a different one. Decide in advance which BOL governs and check that the numbers match the order. For how to assign that check, see who checks the BOL before pickup.

Mistake 7: No record after the truck leaves

Weeks later the customer asks when the order left and how many pallets. If the signed BOL is in a driver's folder and the time is in nobody's notes, the shipper can't answer. Scan and attach the signed BOL to the order the same day.

Decision rules for common situations

Situation Who acts at the shipper Next step
Customer says "our truck will come" with no details Pickup owner Ask for carrier, pickup number, contact and bill-to in one message
Order won't be ready for the customer's date Pickup owner Tell the customer the new ready time the same day
Driver arrives with no appointment Dock lead, then pickup owner Hold the freight; confirm carrier and pickup number with the customer
Pickup number doesn't match Dock lead Do not load; call the pickup owner and the customer
Customer asks the shipper to book the truck instead Pickup owner Change the freight terms on the order and treat it as a booked shipment
Carrier bills the shipper for a collect load Accounts payable Check the BOL terms and bill-to; send the invoice back with the BOL

What should a customer pickup checklist include?

A short checklist split between customer setup, each order and each pickup keeps customer-routed freight from depending on one person's memory. Customer service, the warehouse and logistics should agree on it once and use it every time.

At customer setup

Item Question to answer Owner
Freight terms Does this customer route its own freight always, sometimes or never? Sales and finance
Risk in transit Who carries the risk and files claims under the sales terms? Finance
Contacts Who at the customer sends routing details and gets pickup notices? Customer service
Carriers Which carriers does the customer usually send? Customer service
Label and document rules Does the customer require its own labels, packing list format or references? Customer service
BOL Does the shipper issue the BOL, or does the customer's carrier bring one? Logistics
Delay rule Who pays if the customer's carrier waits because the order wasn't ready? Sales and finance

On each order

  • Freight terms and "customer pickup" marked at entry.
  • Carrier, pickup number, dispatch contact and bill-to collected.
  • Ready date, quantity and weight confirmed to the customer.
  • Appointment set and confirmation sent.
  • BOL, packing list and labels prepared and checked against the order.

At each pickup

  • Driver's carrier and pickup number match the order.
  • Piece count checked and noted on the BOL.
  • Photos of the loaded freight and seal number recorded if used.
  • Signed BOL scanned and attached to the order.
  • Customer told the freight left, with the time and BOL.

Where the checklist should live

Put it where customer service and the dock already work: on the order, in the ERP notes or in the shared inbox where routing details arrive. If the routing details sit in one person's email, the checklist fails the day that person is out. A short routing guide can also tell customers what the shipper needs from them before a pickup.

How does Wilson, by Cartage, help coordinate customer pickups?

Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays freight for manufacturers and distributors, and on customer pickups it handles the shipper's side of the coordination: details, documents, appointments and the record. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.

Wilson works like a logistics department in four parts: the labor, the data, the network and the payments.

The labor

The labor is the back-and-forth. Orders reach Wilson by email, an ERP connection or CSV and spreadsheet files. When an order is missing a detail, Wilson does not invent the value: it holds the order as pending, asks the customer for what is missing and tells the team. It talks to customers and consignees by email or SMS where configured, and to the team in Slack, Microsoft Teams or email.

Wilson generates documents such as the bill of lading, packing slips and pallet labels, and attaches them to the shipment. It can read and create appointments in a connected dock calendar. When a person on the company's team doesn't answer, Wilson follows up in the channel that person normally uses, then escalates.

Wilson books only carriers the company has approved. On a load where the customer chooses the carrier, how Wilson works with that carrier depends on the setup; confirm it in discovery. The company controls the scope: it can start with a subset of shipments or exclude loads by rule, such as collect or third-party shipments, and add them later.

The data

The data is the record. Wilson keeps every order, load, quote, rate, document and contact on record as it works, connected to the company's ERP. An activity log shows who wrote what on the BOL and when, and every message, confirmation and change is kept in the shipment's change history. When the customer asks weeks later when the order left, the answer is on the shipment. Wilson replaces the TMS for freight execution and connects to the company's ERP.

Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.

Teams can add rules and preferences Wilson follows, such as a customer's dock hours or label requirements, and edit them later.

The network

The network applies when the shipper arranges the freight. If a customer asks the shipper to book the truck instead, the shipper's volume counts with every other Wilson customer's for better rates. The network includes carriers and brokers, and the company still approves who hauls its freight.

The payments

The payments cover the loads the shipper pays for. Wilson audits each carrier invoice against the rate confirmation and the POD before money moves, and pays carriers from the Wilson Wallet. Invoices over the rate or outside the rules wait for a person.

Control

Control starts with assisted execution. The company sets approval limits, and routine actions can run automatically within those rules as the workflow is proven. Timing depends on scope: most teams start on a few lanes and expand from there.

Pricing

Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.

FAQs

Can Wilson coordinate pickups when our customer sends its own truck?

Wilson, by Cartage, an AI logistics agent, can handle the shipper's side: asking the customer for missing details, generating the BOL, packing slips and pallet labels, setting appointments in a connected dock calendar and keeping the record. How Wilson works with a carrier the customer chose depends on the setup and is confirmed in discovery. The company can also keep collect shipments out of scope by rule.

Who is responsible for a will-call pickup?

The customer, or its carrier, is responsible for the transport. The shipper is responsible for having the freight ready, setting the appointment, preparing accurate paperwork and releasing the freight to the right driver. One named person at the shipper should own each pickup.

What should the customer send before its truck arrives?

The carrier name, a pickup number, a dispatch contact and the bill-to party for the freight bill. Any special requirements, such as equipment or labels, should come with it. Don't confirm an appointment until these are in hand.

Who prepares the bill of lading on a customer pickup?

Often the shipper, but some customer-routed carriers bring their own. Decide in advance which one governs and check that its terms, bill-to party, weight and piece count match the order.

What if the customer's carrier bills us instead of the customer?

Check the freight terms and bill-to party on the signed BOL. If they show collect or a third party, send the invoice back with a copy of the BOL. If the BOL was wrong, fix the process that produced it.

Should we release freight to a driver who arrives without an appointment?

Not until the customer confirms the carrier and the pickup number. Hold the freight and call the customer's contact. An unexpected truck is a common route to lost or stolen freight.

Who pays if the customer's truck waits because our order isn't ready?

The carrier usually bills the customer, and the customer may ask the shipper to cover it. Set the rule at customer setup instead of deciding it each time, and tell the customer about any delay the same day.

Who files a damage claim on a customer-routed load?

It depends on who carries the risk under the sales terms. Whoever files will need the shipper's dock records: the signed BOL, piece count and photos. Carriers must allow at least nine months to file a claim under federal law.

Can a customer pickup be split into two trips?

Yes, if the customer agrees. Each trip needs its own pickup number, BOL and piece count, and the order should show what left on each.

Sources

Let's review how your customer pickups get scheduled today. You don't need to prepare anything: Cartage maps the workflow with you on the call.

Add Cartage as a preferred source on Google