How do we ship big, light freight without paying for empty trailer space?
How do we ship big, light freight without paying for empty trailer space?
Consider a hypothetical packaging plant. A customer orders eight pallets of empty molded plastic containers. Each pallet is 48 by 40 inches, 90 inches tall and weighs 350 pounds. The whole order weighs 2,800 pounds, which sounds like a small LTL shipment. The pallets cannot be stacked, because the top layer would crush. The first LTL quote comes back far higher than the coordinator expected for 2,800 pounds, and a second carrier asks how many linear feet the freight will take before it will quote at all.
To ship big, light freight without paying for empty space, the shipper has to reduce the space the freight takes, describe that space accurately, and quote the shipment in the modes that price space fairly. That means building denser, stackable pallets where the product allows it, measuring and declaring true dimensions, and comparing standard LTL, volume LTL and truckload quotes for the same load. No single trick fixes it. The savings come from the pallet build, the paperwork and the mode choice working together.
Why light freight costs more than its weight suggests
A trailer has two limits: how much weight it can carry and how much room it has. Dense freight, like steel parts or bottled drinks, hits the weight limit first. Bulky freight, like empty containers, foam, insulation or assembled furniture, hits the space limit first. Once the trailer is full of air-filled boxes, the carrier cannot sell the rest of its weight capacity to anyone else.
Carriers price for that. In LTL, the main tool is freight class, which for many items is set mostly by density. In truckload, the carrier is paid for the whole trailer, so the shipper pays for the space whether the freight weighs 3,000 or 40,000 pounds. In volume LTL, carriers quote based on the space and weight of the specific shipment.
What "paying for empty space" really means
The shipper rarely pays for space that is truly empty. It pays for space its freight blocks. A 90-inch pallet that nothing can sit on top of blocks the full height of the trailer above its footprint. A pallet with product hanging over the edges blocks more floor than its base. A half-full pallet takes a full pallet position. Each of these is space the carrier cannot use for anyone else, so it ends up in the price.
Where to start
Start with the shipments that hurt most. Pull a month of bulky orders and look at three numbers per shipment: weight, cubic feet and freight charge. The loads with the lowest density and the highest charge per pound are where pallet changes and better quoting pay off first.
How density decides the price of bulky LTL freight
For many items, LTL freight class is set by density: the weight of the freight divided by the space it takes, in pounds per cubic foot.** Lower density usually means a higher class, and a higher class means a higher rate per hundred pounds. The National Motor Freight Traffic Association, which publishes the NMFC, puts it plainly in its guidance on the 2025 classification changes: because density plays a larger role, accurate measurements are essential.
How to calculate density
The math is short:
- Measure the handling unit: length, width and height in inches, including the pallet and any overhang, at the tallest and widest points.
- Multiply the three numbers to get cubic inches.
- Divide by 1,728 to get cubic feet.
- Divide the weight in pounds, including the pallet, by the cubic feet.
For the hypothetical containers: 48 × 40 × 90 = 172,800 cubic inches. Divided by 1,728, that is 100 cubic feet. At 350 pounds, the density is 3.5 pounds per cubic foot. That is very light freight, and it will price that way.
What changes the density number
Three things move density, and the shipper controls all of them:
- Height. A pallet built to 90 inches when the product could ship at 60 inches adds 50% more cubic feet for the same weight, if the product allows a lower build.
- Footprint. Overhang adds to length and width. Freight that hangs two inches past a 48 by 40 pallet is measured as 52 by 44.
- Units per pallet. Nesting, knocking down or packing tighter puts more weight in the same space and raises density.
Why the item still matters
Density is not the only factor. Some items carry their own class or handling rules because of how they ship, how easily they are damaged or how they stack. Check the NMFC item for the product, not just the density. The guide on freight class and NMFC density walks through finding the item and matching the density to its scale.
Space rules beyond class
Many carriers' LTL tariffs also include rules for shipments that take a large share of a trailer but weigh little. These rules let the carrier charge based on the space used, for example by linear feet of trailer or cubic capacity, instead of by weight and class alone. The exact rule, threshold and charge vary by carrier and by tariff. The practical point is simple: if a shipment is bulky enough, standard LTL pricing may not apply, and the shipper should ask for a space-based or volume quote up front instead of finding the rule on the invoice.
Let's review a few of your bulky shipments and how they were priced. You don't need to prepare anything: Cartage maps the workflow with you on the call.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.
Book a demo →What pallet and packaging changes reduce the space we pay for?
The cheapest space is space the freight never takes. Before asking carriers for better rates, look at how the freight is built. Every inch removed from a pallet before pickup is an inch the carrier cannot charge for.
Make pallets stackable where the product allows
A non-stackable pallet claims the full height of the trailer above it. Two stackable pallets share one floor position. For bulky freight, this is often the largest single change. Options include:
- A flat, rigid top sheet or cap so another pallet can sit on it.
- Corner boards that carry the load on the edges instead of the product.
- Lowering the pallet height so two fit under the trailer ceiling.
Mark stackable pallets clearly and write "stackable" on the quote request and BOL. A carrier that does not know the freight can stack will price it as if it cannot.
Match pallet height to the trailer
Trailer inside height varies by equipment, so a pallet height that double-stacks in one trailer may not in another. Ask the carrier for the usable interior height on the lanes that matter, then set a standard build height that lets two pallets stack with room for the forklift. A few inches off each pallet can be the difference between one tier and two.
Remove overhang
Product that hangs over the pallet edge raises the measured footprint and gets crushed by the next pallet. Use a pallet size that matches the carton pattern, or change the pattern so cartons stay inside the edges. Overhang costs twice: once in the price and again in damage claims.
Pack the product tighter
Some bulky products can ship in less space:
- Nest containers, cups, buckets or trays inside each other.
- Knock down items that are assembled at the destination.
- Compress soft goods like foam or insulation where the product allows it.
- Fill half-empty pallets by combining SKUs going to the same consignee.
Each of these changes the product side of the business, so involve whoever owns packaging and quality. A packaging change that saves freight but raises damage is not a saving.
Mix dense and light freight in truckloads
In truckload, the shipper pays for the trailer. A trailer full of light freight is limited by space and carries little weight. If the same customer also orders dense products, loading both on one truck puts weight into the space the light freight leaves unused. This works best when orders for the same destination can ship on the same day, so it needs coordination between order entry and shipping.
A before-and-after example
The table below uses the hypothetical eight-pallet order. The numbers show the effect of the pallet build on space, not real carrier rates.
| Build | Pallets | Height | Stackable | Floor positions | Total cubic feet | Density (lb/ft³) |
|---|---|---|---|---|---|---|
| Original | 8 | 90 in | No | 8 | 800 | 3.5 |
| Lower build, same units | 12 | 60 in | No | 12 | 800 | 3.5 |
| Lower build with top caps | 12 | 60 in | Yes | 6 | 800 | 3.5 |
| Nested containers | 6 | 60 in | Yes | 3 | 400 | 7.0 |
Lowering the build alone does not help: the same freight now takes more floor. Adding top caps so the shorter pallets stack cuts floor positions in half. Nesting the containers halves the cubic feet and doubles the density, which usually moves the freight into a lower class. The point of the table is that the gains stack: the right height only pays off when the pallets can also stack.
Which mode should we use for big, light shipments?
Quote bulky freight in more than one mode, because LTL, volume LTL and truckload price space differently. The right mode depends on how much of a trailer the freight really uses, not on its weight.
Standard LTL
Standard LTL prices by weight and class, with minimum charges and possible space rules for bulky shipments. It fits smaller bulky shipments that take a few pallet positions. As the shipment grows, class-based pricing on low-density freight climbs fast, and space rules may kick in.
Volume LTL
Volume LTL, offered by many LTL carriers, prices larger shipments based on the space and weight of the specific load, usually through a spot quote. For bulky freight that takes a meaningful share of a trailer, it often beats standard LTL because the carrier prices the actual space instead of applying class to a light load. Volume quotes are not tariff rates: they are quoted for a specific shipment and date, so they need fresh quotes.
Partial and full truckload
Once bulky freight takes much of a trailer, truckload can cost less than either LTL option, because the shipper pays one price for the whole trailer and the freight does not move through terminals. Truckload also cuts handling, which matters for light freight that damages easily. The guide on choosing LTL, volume LTL or full truckload covers the thresholds in more detail.
Comparing the modes on one shipment
Consider the nested version of the hypothetical order: six stackable pallets, 400 cubic feet, 2,800 pounds. The quotes below are hypothetical and show how to read them, not market prices.
| Mode | How it is priced | Hypothetical total | What to check |
|---|---|---|---|
| Standard LTL | Weight, class, minimums, space rules | $1,140 | Class on the quote matches the density; no space rule applies |
| Volume LTL | Spot quote on space and weight | $890 | Linear feet and stackability on the quote; validity date |
| Partial truckload | Share of trailer | $960 | Transit time and any extra stops |
| Full truckload | Whole trailer | $1,650 | Only worth it if more freight joins the load |
Here, volume LTL wins because the quote reflects the six stacked pallets. If the pallets were still the original eight non-stackable ones, the comparison could flip. That is why the pallet build should be settled before quotes are requested.
When the order grows
Bulky orders often grow between quote and pickup. A pallet added the day before can push a shipment past a space threshold or change the right mode. If the count or dimensions change, ask for a new quote rather than assuming the old price holds. The guide on what happens to the quote when the pallet count changes explains why.
What mistakes make bulky freight more expensive?
Most extra cost on bulky freight comes from information that was wrong, missing or late. Carriers measure freight at their terminals, and when the real size differs from the paperwork, the invoice changes.
Mistake 1: Quoting by weight alone
A quote request that says "8 pallets, 2,800 lb" invites a price that ignores the space. The carrier either guesses the class or applies its space rules later. Always send length, width, height, count and whether pallets can stack.
Mistake 2: Measuring before wrapping
Stretch wrap, corner boards and top caps add inches. Measure the finished pallet, as it will sit on the dock, at its widest and tallest points.
Mistake 3: Declaring a class without the density behind it
A class picked from habit or from an old BOL may not match today's product or build. When the carrier measures and finds a different density, a reclass follows. The guide on stopping LTL reweigh and reclass charges covers how to prevent and dispute them.
Mistake 4: Assuming stackable freight will be stacked
Saying freight can stack does not guarantee the carrier will stack it, and freight marked "do not stack" will be priced as non-stackable. Be accurate: if it can take weight, say so; if it cannot, say so and price accordingly.
Mistake 5: Using one mode for every bulky order
Teams that default to standard LTL for everything miss the loads where volume LTL or truckload would cost less. A simple rule by cubic feet or pallet positions, reviewed every quarter, catches most of them.
Mistake 6: Comparing quotes that are not alike
One carrier quotes standard LTL with class 250 and no space charge. Another quotes volume LTL with a linear-foot basis. A third leaves out the liftgate the consignee needs. Comparing the headline numbers picks the wrong one. Compare total cost for the same freight and the same services. See why the cheapest freight quote often leaves out the expensive part.
Decision rules for the team
| Situation | Rule |
|---|---|
| Density below the lane's usual range | Check the build before quoting; ask packaging if it can stack or nest |
| Shipment takes several pallet positions | Quote standard LTL and volume LTL together |
| Shipment takes a large share of a trailer | Add partial and full truckload quotes |
| Pallets can stack | Say so on the quote request and the BOL |
| Count or dimensions change after quoting | Request a new quote before pickup |
| Invoice shows reclass or space charge | Compare with the booking and the BOL before paying |
What checklist should we run before quoting bulky freight?
A short checklist, run on every bulky order before the first quote request, removes most of the surprises. It takes a few minutes and protects the price on the invoice.
| Check | Question | Who answers |
|---|---|---|
| Finished dimensions | Length, width, height of each handling unit after wrapping? | Shipping |
| Weight | Weight of each unit, including the pallet? | Shipping |
| Count | How many handling units, and could the count change before pickup? | Order owner |
| Stackability | Can the units take weight on top? How much? | Packaging or quality |
| Overhang | Does any product hang past the pallet edge? | Shipping |
| Density | What is the density per unit and for the shipment? | Logistics |
| NMFC item | Which item applies, and does it have its own handling rules? | Logistics |
| Mode | Which modes should be quoted for this size? | Logistics |
| Services | Liftgate, appointment, inside delivery or limited access needed? | Order owner |
| Combine | Are other orders going to the same consignee this week? | Order owner |
| Paperwork | Do the quote request and BOL show the same dimensions and count? | Logistics |
Measure once, store it
Bulky products often ship in the same pallet configuration week after week. Store the standard build for each SKU or pallet type: dimensions, weight, units per pallet and stackability. Then quote requests and BOLs pull the same numbers every time, and only exceptions need a tape measure.
Watch the invoices
After a few weeks, look at the invoices on bulky loads. Count how many had reclass, reweigh or space charges, and on which products. A pattern on one SKU usually means the stored dimensions or the class are wrong for it. Fix the record, not just the invoice.
Review the mode rule each quarter
Rates and carrier rules change. Every quarter, look at bulky loads by mode and total cost. If volume LTL beat standard LTL on most shipments above a certain size, move the threshold. If truckload often won once more freight was combined, make combining a standard step.
How does Wilson, by Cartage, help ship bulky freight without overpaying for space?
Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays freight for manufacturers and distributors, so bulky shipments are quoted with the right details and checked before anyone pays. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.
Wilson does not design pallets or plan loads: the pallet build stays with the team that owns packaging. What Wilson does is make sure the space the freight takes is described accurately and priced fairly, on every load. Cartage describes Wilson as a free logistics department in four parts.
The labor
The labor is the work from the first quote to the final POD. When a bulky order arrives by email, an ERP connection or a CSV or XLSX file, Wilson checks it for what a quote needs. If dimensions, weight or count are missing, Wilson does not guess: it holds the order as pending, asks for the missing detail and tells the team. It then requests quotes from the company's approved carriers with the full dimensions and stackability on the request, compares them on total cost, including standard LTL, volume LTL and truckload where the rules say to quote them, negotiates toward the company's rate targets within approval limits, books with written acceptance and a rate confirmation, and generates the BOL, packing slips and pallet labels. It tracks the load and follows up with carriers by email and phone until it gets an answer.
The data
The data is the record. Wilson keeps every order, quote, rate, document and contact on file as it works, connected to the company's ERP. The team can add rules, such as "quote volume LTL when a shipment takes six or more pallet positions," and edit them later. Wilson replaces the TMS for freight execution and connects to the company's ERP. Every message, confirmation and change is kept in the shipment's change history, and Wilson can produce lane-rate reports on request from the loads it runs, which helps when the team reviews its mode thresholds.
The network
The network gives better freight rates on every lane, because the shipper's volume counts with every other Wilson customer's. The network includes carriers and brokers. The company still approves who hauls its freight, and it can keep its own carriers.
The payments
The payments close the loop. Wilson audits each carrier invoice against the rate confirmation and POD, including reweigh and reclass lines, which it checks against the booking and the documents. An invoice over the rate is flagged, and Wilson asks the carrier why before paying. Carriers are paid from the Wilson Wallet, and payments above the approval limits or outside the rules wait for a person.
Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope. Wilson handles LTL, FTL, ocean, drayage, parcel and cross-border freight. Control starts with assisted execution: the company sets approval limits, and routine actions run automatically within those rules as the workflow is proven. Timing depends on scope: most teams start on a few lanes and expand from there.
Pricing
Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.
FAQs
Can Wilson help us ship big, light freight without paying for empty space?
Wilson, by Cartage, an AI logistics agent, requests quotes from the company's approved carriers with the full dimensions and stackability, compares standard LTL, volume LTL and truckload on total cost, and books within the company's rules. It audits reclass and space charges against the booking before paying. The pallet build itself stays with the team that owns packaging.
Why does light freight cost so much to ship?
Because it fills a trailer's space before it uses the trailer's weight capacity. The carrier cannot sell that space to anyone else, so it prices the space through freight class, space rules or a truckload rate.
How do I calculate the density of a pallet?
Multiply length, width and height in inches, divide by 1,728 to get cubic feet, then divide the weight in pounds by the cubic feet. Measure the finished pallet, including wrap and any overhang.
Does making pallets stackable lower the price?
Often, yes, because two stacked pallets share one floor position. It only helps if the carrier knows the freight can stack, so write it on the quote request and the BOL.
When should bulky freight move by volume LTL?
When a shipment takes a meaningful share of a trailer but not the whole thing. Volume LTL quotes are priced on the specific shipment's space and weight, so they need a fresh quote each time.
When does truckload make sense for light freight?
When the freight takes most of a trailer, or when other orders for the same destination can ride with it. Truckload also cuts handling, which helps fragile bulky goods.
What is a linear-foot or cubic capacity rule?
It is a carrier tariff rule that prices a bulky LTL shipment by the trailer space it uses rather than by weight and class alone. Thresholds and charges vary by carrier, so check the tariff or ask for a volume quote.
What should we do when an invoice shows a reclass on bulky freight?
Compare the invoice with the booking, the BOL dimensions and any inspection record. If the paperwork was accurate, dispute the charge with the carrier. If it was wrong, fix the stored dimensions so it does not repeat.
Does Wilson pick the pallet configuration?
No. Wilson does not design pallets or plan loads. It uses the dimensions and stackability the team provides on every quote request and BOL, and asks for them when they are missing.
Sources
- Cartage, Wilson product FAQ and product scope, October 2026: https://cartage.ai
- National Motor Freight Traffic Association, 2025 NMFC changes: https://info.nmfta.org/2025-nmfc-changes
Let's review a few of your bulky shipments and how they were priced. You don't need to prepare anything: Cartage maps the workflow with you on the call.
