Our loads need tarps on a flatbed. What should we tell the carrier and what should we pay?

Freight pickups guideNov 17, 202617 min read

What should a shipper tell a flatbed carrier when a load needs tarps?

A steel fabricator has a load of painted structural parts going to a job site on Thursday. The coordinator books a flatbed by phone from a carrier that has moved the lane before. Nobody mentions tarps. The driver shows up with straps and chains but no tarps, because the last load on the lane was bare steel. The plant manager refuses to load painted parts without cover. The driver leaves to find tarps and comes back four hours later. The invoice adds a tarp fee nobody agreed to and a detention charge for the wait.

When a flatbed load needs tarps, the shipper should tell the carrier before quoting: that tarps are required, the type of tarp, the size of the drop, the dimensions and weight of the freight and any special protection the product needs, and then get the tarp charge written on the rate confirmation. Every one of those details changes which truck shows up and what the load costs.

Flatbed freight is less forgiving than freight in a closed trailer. The carrier needs to know what it is hauling, how it will be loaded and what the freight needs on the road. Missing details become delays at the dock and surprise charges on the invoice.

Why tarps matter

Tarps protect freight from rain, snow, road grime and sun. Some products can ride bare: raw steel beams, concrete products and many kinds of heavy equipment. Others need cover: finished or painted metal, lumber for certain uses, machinery with exposed electronics, and packaged goods. The shipper knows which is which. The carrier does not, unless someone says so.

What tarping changes for the carrier

Tarping takes time, physical effort and equipment. A driver may need to carry several heavy tarps and spend extra time at the dock putting them on. That is why carriers usually charge for it and why some drivers decline tarped loads. If the requirement appears only when the truck arrives, the carrier may not have the right tarps, the driver may refuse, or the price will change on the spot.

Want a second look at your flatbed bookings?

Let's review your flatbed bookings and the charges on them. You don't need to prepare anything: Cartage maps the workflow with you on the call.

See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.

Book a demo →

What details should go into a tarped flatbed booking?

A complete tarped flatbed booking lists the equipment, the freight, the tarp, the securement needs, the loading method and the dock rules. Put all of it in the quote request so each carrier prices the same load.

The booking details

Detail What to say Why it matters
Equipment Flatbed, step deck or other open deck; trailer length Height and length limits decide which trailer works
Freight Description, piece count, dimensions and weight of each piece The carrier plans securement and checks legal limits
Tarp required Yes or no, stated plainly Changes the truck, the time and the price
Tarp type Lumber tarp, steel tarp, smoke tarp or as the carrier recommends Different tarps fit different freight shapes
Drop size How far the tarp must hang down the sides Taller freight needs a larger drop
Special protection Edge protectors, dunnage, no chains on finished surfaces Protects the product from the securement itself
Loading Forklift, crane or other; side or rear load; who loads The carrier needs to know if the driver must help
Dock rules Hours, appointment, safety gear, tarping area Avoids waiting and refusals on arrival
Delivery site Job site or dock, unloading method, access limits Affects the trailer choice and the unloading time

Tarp types in plain terms

Carriers and shippers usually talk about a few kinds of tarps:

  • Lumber tarps are large and cover tall loads with long side drops.
  • Steel tarps are smaller and fit lower loads like coils, beams and plate.
  • Smoke tarps cover only the front of the load to protect it from exhaust.

Shippers do not need to know every tarp type. They do need to say what the freight looks like, how tall it is and whether it must be fully covered. A carrier that sees "painted parts, 6 feet high, must be fully covered" can bring the right tarps.

Drop size

The drop is how far the tarp hangs down the side of the load. Carriers often describe tarps by drop length, such as 4, 6 or 8 feet. A taller load needs a bigger drop to reach the deck. If the freight is 7 feet tall and the carrier brings tarps with a short drop, the sides stay exposed.

Who supplies special protection

Many products need protection between the chains or straps and the freight. Edge protectors, corner guards and wood dunnage keep straps from cutting into finished surfaces. Decide in the booking who supplies them. Some carriers carry their own; some shippers prefer to supply them so they know what touches the product. If the shipper supplies them, have them ready at the dock.

Loading and the driver's role

Most flatbed freight is loaded by the shipper with a forklift or crane. The driver usually positions the trailer, watches the loading and then secures and tars the load. Say who loads and what equipment the dock has. A load that needs a crane at a site without one will not ship.

For a wider look at open-deck freight, including oversized loads and permits, see how to ship flatbed and oversized freight.

Who is responsible for securing a flatbed load?

Under federal rules, the driver may not operate the truck, and the motor carrier may not require or permit it to operate, unless the cargo is properly distributed and adequately secured. That makes securement on the road the carrier's and driver's legal job. The shipper still has a role: loading safely, describing the freight accurately and pointing out anything the product needs.

What the federal rules say

The cargo securement rules in 49 CFR Part 393, Subpart I apply to trucks, truck tractors, semitrailers, full trailers and pole trailers. Under 49 CFR 393.100, cargo must be loaded and secured to prevent it from leaking, spilling, blowing or falling from the vehicle, and from shifting in a way that affects the vehicle's stability or handling.

Under 49 CFR 392.9, a driver may not operate a commercial motor vehicle, and the motor carrier may not require or permit it, unless the cargo is properly distributed and adequately secured and the vehicle's tarpaulins and other equipment are secured. The driver must:

  • Make sure the cargo is secured before driving.
  • Inspect the cargo and the securement devices within the first 50 miles of the trip and make any needed adjustments.
  • Re-examine the cargo and devices during the trip whenever the driver changes duty status, after 3 hours of driving or after 150 miles, whichever comes first.

There are exceptions for sealed loads the driver has been told not to open, and for loads that are hard to reach. Those rarely apply to an open flatbed.

What the shipper should do

  • Describe the freight accurately: dimensions, weight, number of pieces, center of gravity if it is unusual.
  • Load the freight so it can be secured: level, on dunnage where needed, with weight placed as the driver asks.
  • Tell the driver about fragile points, finished surfaces and any lifting points.
  • Supply any protection the product needs if the booking says the shipper will.
  • Take photos of the freight before and after securing and tarping.

A shipper should not tell a driver how many straps to use or override the driver's securement. If the shipper thinks a load is not secure, the right move is to raise it with the driver and the carrier before the truck leaves and record that it was raised.

When the driver refuses the load

A driver can refuse to haul freight that cannot be secured safely on that trailer. That is a sign to stop and talk, not to argue. The usual causes are freight that is taller or wider than the booking said, missing dunnage, or no way to keep straps off a finished surface. A complete booking prevents most of these refusals.

What should happen at the dock on pickup day?

On pickup day, the dock should confirm the truck matches the booking before loading starts, record the times, take photos and write any issue on the bill of lading. Most flatbed disputes trace back to the 30 minutes between the truck's arrival and its departure.

Before the truck arrives

The day before pickup, confirm three things with the carrier: the truck and trailer type, that the driver will bring the tarps the booking calls for, and the arrival time. A short message is enough: "Confirming flatbed with 6-foot drop tarps for painted parts, arriving 7:00 a.m." If the carrier cannot confirm the tarps, there is still time to fix it.

Make sure the freight is staged and ready. A driver who waits for product to come off the line starts the detention clock, and a load that is half built at arrival often leaves late. Have any shipper-supplied dunnage and edge protection next to the freight.

When the truck arrives

Record the arrival time. Then check, before loading:

  • The trailer is the type and length in the booking.
  • The driver has the tarps the booking calls for.
  • The deck is clean and dry enough for the product.
  • The driver has the straps, chains and edge protection the load needs.

If something is missing, raise it right away with the carrier's dispatch, not only the driver. Write down who was told and when. If the truck has to leave and come back, that record decides who pays for the lost time.

During loading

Load as the driver directs on weight placement. Keep finished surfaces away from chains and bare straps. If the product has lifting points or a top that cannot carry weight, tell the driver before loading starts.

After securing and tarping

Take photos from each side and each end after the load is secured and again after it is tarped. Include a photo of the trailer number. Photos take two minutes and answer most questions later: Was the load covered? Were the edges protected? Did the tarp reach the deck?

The bill of lading

The bill of lading should describe the freight accurately: pieces, weight and description. If the shipper has a note about the load, such as "tarped per shipper request" or "edge protection supplied by shipper," write it on the bill of lading before the driver signs. Record the departure time.

Weather and timing

Rain at pickup changes things. Tarping in the rain is slower and harder, and wet freight under a tarp can still be damaged. If the product cannot get wet at all, consider loading under cover or rescheduling. Tell the carrier and the receiver if the pickup time moves. If the delivery is at a job site, check whether the site can unload in bad weather or will ask the driver to wait.

At delivery

The receiver should look at the load before the tarps come off and note any damage, water exposure or missing pieces on the delivery receipt. Specific notes are worth much more than "subject to inspection." If damage shows up, photos and the pickup record become the evidence for a claim.

How do tarp charges work, and how do you avoid paying for the wrong ones?

Tarp charges are usually a separate accessorial per load, set by each carrier, and they should be agreed in writing before the truck is dispatched. There is no standard national tarp fee. The amount depends on the carrier, the tarp type, the drop size and sometimes the lane.

Common flatbed charges to ask about

Charge When it applies What to confirm before booking
Tarp fee Load must be tarped Amount, tarp type and drop size included
Detention Driver waits past the free time at pickup or delivery Free time, hourly rate, how time is recorded
Truck order not used Load canceled after the truck was dispatched When the charge applies and the amount
Layover Driver held overnight because the load was not ready Daily amount and when it starts
Extra stop Load picks up or delivers at more than one site Per-stop amount
Driver assist Driver helps load or unload Whether it is expected and charged
Permits and escorts Freight is oversize or overweight Who arranges and pays; this goes beyond normal flatbed

Ask for the all-in price

Ask each carrier for a total that includes the tarp fee and any charge the load is likely to trigger. Comparing base rates alone hides the difference. A carrier with a lower base rate and a high tarp fee can cost more than one with a higher base rate that includes tarping. The guide on checking accessorial charges before booking covers this in more detail.

Put it on the rate confirmation

The rate confirmation should list the base rate, the tarp fee and any other agreed charge. If the carrier quoted "tarps included," the rate confirmation should say so. Without that line, the invoice can add a tarp fee and the shipper has nothing in writing to push back with.

A hypothetical invoice check

Consider a hypothetical tarped load. The rate confirmation shows a $1,850 base rate and a $125 tarp fee, for a total of $1,975. The invoice arrives at $2,225: the base rate, the tarp fee, $150 for detention at pickup and a second $100 tarp charge described as "additional tarp." The pickup record shows the driver arrived on time and left 90 minutes later. The free time on the rate confirmation is 2 hours.

The check finds two problems. The detention charge does not match the record: the truck left inside the free time. The second tarp charge was never agreed. Both should be raised with the carrier before payment. The correct amount, based on the documents, is $1,975.

Checklist for every tarped load

Step Check
Quote request Tarp required, type, drop size, dimensions and weight are listed
Carrier quote Tarp fee is shown or "included" is written
Rate confirmation Base rate, tarp fee and other agreed charges are listed
Pickup Driver arrived with the right tarps; photos taken before and after
Pickup times Arrival and departure recorded
Delivery POD notes any damage or water exposure
Invoice Charges match the rate confirmation and the pickup and delivery record
Payment Charges outside the agreement wait for review

Mistakes that cost money

  • Not mentioning tarps in the quote request. The price changes at the dock, or the truck leaves.
  • Comparing base rates only. The tarp fee decides which carrier is cheaper.
  • No photos. Water damage claims and tarp disputes come down to what the load looked like when it left.
  • Accepting "tarps as needed." That phrase leaves the decision and the charge to the driver. Say whether tarps are required.
  • Paying the invoice without the rate confirmation in hand. Unagreed charges go through when nobody checks. See why accessorial charges need an explanation before payment.

How does Wilson, by Cartage, handle tarped flatbed loads?

Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays freight for manufacturers and distributors, including truckload freight on open-deck equipment. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.

Wilson works like a free logistics department with four parts: the labor, the data, the network and the payments.

The labor

The labor is the booking and follow-up work. Wilson requests quotes from the company's approved carriers with the load's details, including equipment, dimensions, weight and the tarp requirement, and compares the quotes on total cost. It negotiates toward the company's rate targets within approval limits; rates outside the limits go to the logistics team. It books with written acceptance and a rate confirmation, schedules the pickup and checks carrier availability before booking. If a carrier says it can't pick up until a later day, Wilson presents that to the team and leaves the agreed date unchanged.

Wilson does not secure or tarp loads and does not tell drivers how to secure freight. That stays with the carrier and driver under the federal rules. Photos the dock team takes at pickup can be kept with the shipment's documents, next to the BOL.

The data

The data is the record. Wilson keeps each load's quote, rate confirmation, bill of lading, pickup times, carrier updates and POD on the shipment. Every message, confirmation and change is kept in the shipment's change history. If a tarp fee or detention charge is disputed later, the team can see what was agreed and what happened at the dock.

Wilson replaces the TMS for freight execution and connects to the company's ERP. Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.

The network

The network gives the shipper better freight rates on every lane, because its volume counts with every other Wilson customer's. The network includes carriers and brokers, and the company still approves who hauls its freight. Booking uses a ranked list of carriers per lane, so a lane that needs tarped flatbeds can list the carriers the team trusts with that work.

The payments

The payments part is where tarp and detention charges are checked. Wilson audits each carrier invoice against the rate confirmation and the POD before money moves, then pays carriers from the Wilson Wallet. An invoice with a tarp fee that was not agreed, or a charge over the rate, is held and flagged for a person.

Control

The company starts with assisted execution and sets the approval limits. Routine actions run automatically within those rules as the workflow is proven. Timing depends on scope: most teams start on a few lanes and expand from there.

Pricing

Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.

FAQs

Can Wilson book flatbed loads that need tarps?

Wilson, by Cartage, an AI logistics agent, requests quotes from the company's approved carriers with the load's equipment and tarp requirement, compares them on total cost and books with a written rate confirmation. It then audits the carrier invoice against that confirmation and the POD before paying. Securement and tarping stay with the carrier and driver.

Who is responsible for securing a flatbed load?

Under 49 CFR 392.9, the driver may not operate the truck, and the motor carrier may not require or permit it, unless the cargo is properly distributed and adequately secured. The shipper should load safely, describe the freight accurately and point out anything the product needs.

How much does a tarp fee cost?

There is no standard amount. Each carrier sets its own tarp fee, and it can vary by tarp type, drop size and lane. Ask for it in the quote and get it on the rate confirmation.

What is a tarp drop?

The drop is how far the tarp hangs down the side of the load. Carriers often describe tarps by drop length, such as 4, 6 or 8 feet. Taller freight needs a larger drop to be fully covered.

Does the driver have to check the load during the trip?

Yes. Under 49 CFR 392.9, the driver must inspect the cargo and securement within the first 50 miles and re-examine it after a change of duty status, 3 hours of driving or 150 miles, whichever comes first.

Can a driver refuse a flatbed load?

A driver can decline freight that cannot be secured safely on that trailer. The usual causes are freight larger than the booking said, missing dunnage or no way to protect finished surfaces. A complete booking prevents most refusals.

Who supplies edge protectors and dunnage?

It depends on the agreement. Some carriers carry their own; some shippers supply them. Decide it in the booking and have them ready at the dock if the shipper supplies them.

What if the invoice has a tarp fee we never agreed to?

Hold the invoice and ask the carrier to explain or remove the charge. Compare it to the rate confirmation and the pickup record before paying.

Should we take photos at pickup?

Yes. Photos of the freight before and after securing and tarping help settle damage and charge disputes later.

Sources

Let's review your flatbed bookings and the charges on them. You don't need to prepare anything: Cartage maps the workflow with you on the call.

Add Cartage as a preferred source on Google