Our only logistics person is going on vacation. Who runs freight?

Carrier email and shared freight inboxes guideNov 17, 202617 min read

Our only logistics person is going on vacation. Who runs freight?

It is three weeks before the holiday. A manufacturer has one person who runs all of its outbound freight: quotes, bookings, tracking, carrier calls, PODs and freight invoices. She is taking ten days off. Her manager asks who will cover. The honest answer is "someone from customer service, and she'll check email from her phone." Everyone knows that plan will not hold up past the second day.

When the only logistics person goes on vacation, freight should be run by a named backup working from a written handover: open loads with next steps, scheduled loads, written rules and carrier contacts, with one escalation person for anything outside the rules. The goal is that the backup never has to guess and the person on vacation never has to be called.

That sounds like a lot of work for ten days. It is. But the same work protects the company the day that person is out sick, changes jobs or simply has a very busy week. Vacation is the planned version of a risk that also arrives unplanned.

What actually breaks when one person is out

When freight depends on one person, the first problems are rarely dramatic. They are small things that pile up:

  • A carrier replies to a quote request, and nobody accepts it before it expires.
  • A pickup is missed, and nobody notices until the customer calls.
  • A customer requires an appointment, and the backup does not know that.
  • A carrier invoice arrives with an extra charge, and it gets paid because nobody knows the agreed rate.
  • A POD never comes in, and the customer's payment waits.

Each of these can be fixed. Together, over ten days, they create a backlog the person comes back to, and some of them cost real money.

Why this is a common problem

In many manufacturers and distributors, freight grew one load at a time. The person who books it learned the carriers, the customers and the rules by doing the work. None of it needed to be written down, because the same person always did it. The company never decided to keep everything in one head. It just happened.

Where to start this week

Ask the logistics person to spend 30 minutes listing everything she did in the last five working days. Not a job description, but actual tasks: "requested quotes for three loads to Texas," "called a carrier about a missed pickup," "sent POD to customer for invoice." That list is the starting point for the handover.

Let's review what your logistics person keeps in their head. You don't need to prepare anything: Cartage maps the workflow with you on the call.

What can wait and what cannot

Not every freight task needs to happen while the person is away. Sorting tasks before the vacation tells the backup where to spend time:

Task Can it wait ten days? Why
Booking orders that ship this week No The customer's delivery date does not move
Confirming pickups No A missed pickup usually means a missed delivery
Answering carrier questions on live loads No Carriers hold or drop loads when nobody answers
Requesting PODs Partly A few days is fine; customers waiting on a POD to pay are not
Reviewing carrier invoices Often Many carriers accept a short delay; check the main ones
Rate reviews and carrier changes Yes Better done by the person who owns the lanes
Monthly freight reports Yes Can be run on return

The "no" rows are the backup's real job. Everything else can be planned around.

See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.

Book a demo →

How do you prepare a freight handover before a vacation?

Prepare the handover in three passes over two weeks: write down the work, write down the rules and contacts, then run a few days side by side. Leaving it to the last day guarantees gaps.

Two weeks before: list the work

Start with the recurring work. For each item, write what it is, how often it happens and where it is done:

  • Daily: checking new orders, requesting quotes, booking, confirming pickups, tracking, answering carrier and customer emails.
  • Weekly: scheduled transfer or replenishment loads, carrier invoice review, POD follow-up.
  • Monthly: freight cost reporting, rate checks on main lanes.

Then list the work that happens only sometimes: claims, rebooking after a dropped load, appointment changes, export paperwork.

Ten days before: write the rules

The backup needs the rules the logistics person applies without thinking. Common ones:

  • Which carriers are approved on which lanes, and in what order.
  • The usual rate or the most the company will pay on each main lane.
  • Which customers need appointments, delivery windows or special paperwork.
  • Who approves a rate above the limit, and how fast they answer.
  • What to do when a carrier misses a pickup or drops a load.
  • Which invoices can be approved and which need a second look.

Write each rule in one sentence. "Loads to the Ohio customer need an appointment made two days ahead; their DC only receives from 6:00 to 10:00 a.m." is a rule the backup can follow.

One week before: gather contacts

List every carrier contact by lane: dispatch, tracking, billing and an after-hours number. Add the customer contacts for appointments and delivery questions, and the people inside the company who release orders and approve spend. If contacts live in one person's email, export them now.

Three days before: run side by side

For the last few days, the backup does the work while the logistics person watches. This is when the backup asks the questions nobody thought to write down. "Why did you call this carrier instead of emailing?" "Why did you book this load a day early?" Every answer should go into the handover notes.

The last day: hand over open loads

On the last day, go through every open load together. For each one, write the current status, the next action and the date it is due. Do not leave a load as "in progress." Give it a next step.

What should the handover list include?

A good handover list has four parts: open loads, scheduled loads, rules and contacts. The table below shows a simple format for the first part, which matters most.

Part 1: Open loads

Load Status Next action Due Who to call if stuck
Order 4512, 8 pallets to Atlanta Booked, picks up Tuesday Confirm pickup by noon Tuesday Tuesday Carrier dispatch, then escalation person
Order 4518, truckload to Dallas Quotes in, not booked Book the lowest usable quote under the lane limit Monday 3:00 p.m. Escalation person if over limit
Order 4490, LTL to Denver Delivered, POD missing Request POD from carrier Wednesday Carrier billing contact
Invoice for order 4471 Over the agreed rate by $180 Ask the carrier why before approving Friday Escalation person

The example is hypothetical. The point is the format: every open item has one clear next step and a date.

Part 2: Scheduled loads

List every load that will be ordered or shipped during the vacation that the team already knows about: weekly transfers, standing orders, customer releases. Include the usual carrier, the usual rate and any special notes.

Part 3: Rules

Collect the rules from the earlier step into one page. Group them by topic: carriers, customers, approvals, exceptions, invoices. Keep it short. A page the backup actually reads beats a manual nobody opens.

Part 4: Contacts

One table: carrier, lane, contact name or role, email, phone and when to use each. One more for customer receiving contacts. One more for internal people.

Where the handover should live

Keep the handover in one shared place the backup and the escalation person can both open. A shared document or a shared folder works. A personal inbox does not. The guide on what happens to unanswered carrier email when a coordinator leaves covers the same problem when the absence is permanent, and most of its steps apply here.

Who should cover, and what goes wrong?

Name one backup for the daily work and one escalation person for decisions outside the rules. Splitting the work across several people without a clear owner is the most common way handovers fail.

Choosing the backup

The best backup is someone who already touches freight: customer service, a shipping clerk or a buyer who books inbound freight. They know the customers or the products and only need to learn the carrier side. If nobody fits, a manager can cover, but they should plan real time for it each day, not "in between meetings."

Choosing the escalation person

The escalation person decides anything outside the written rules: a rate above the limit, a carrier not on the approved list, a customer asking to move a date, a claim. It is usually the logistics person's manager or the operations manager. They should know they have the job, and they should answer the same day.

What the escalation person needs before day one

The escalation person does not need to learn the whole job, but they need enough to decide quickly. Before the vacation starts, give them:

  • The lane limits and approval rules, so they know what "over the limit" means in dollars.
  • The list of approved carriers on the main lanes, so they do not approve a carrier the company has never used.
  • The customers with fixed appointments or late fees, so they know which delays cost money.
  • The two or three open problems most likely to need a decision, with the options already written down.

A quick 20-minute walkthrough is usually enough. The aim is that when the backup sends a question, the escalation person can answer in minutes instead of asking three questions back. A slow answer on a rate approval can cost the quote; a slow answer on a dropped load can cost the delivery date.

Mistake 1: "She'll check email from her phone"

This plan protects nobody. The person on vacation either works the whole time or misses things. Carriers and customers do not know whether anyone is reading. Turn on an out-of-office message that names the backup, and mean it.

Mistake 2: Leaving emails in a personal inbox

If carriers and customers write to one person's address, the backup cannot see the replies. Before the vacation, either give the backup access to the inbox, set up forwarding, or ask carriers and customers to write to a shared address. A shared freight inbox is better for the long term too.

Mistake 3: No next step on open loads

"Load 4518 is being worked on" is not a handover. "Book the lowest quote under $2,100 by Monday 3:00 p.m.; call the escalation person if all quotes are higher" is.

Mistake 4: Skipping invoices

Freight invoices often wait for the logistics person to return. That is fine for a week, but a carrier may hold the next load if invoices go unpaid, and some charges need a quick dispute. Decide before the vacation whether invoices wait or the backup reviews them under written rules.

Mistake 5: Not writing down what happened

When the logistics person returns, she needs to know what changed. Every booking, problem and decision during the vacation should be noted on the load. Otherwise the first two days back are spent reconstructing the week.

Mistake 6: Treating the vacation as the end of the problem

When she comes back, the handover list goes into a drawer until next time. Keep it. Update it each quarter. It is the start of real backup coverage for sick days, busy weeks and the day she moves on. The guide on how to get a new logistics coordinator up to speed fast shows how the same notes become a training plan.

When the absence is not planned

Vacations come with notice. Sick days, family emergencies and resignations do not. A company that only builds a handover before vacations will still be stuck the day the logistics person calls in sick on a Monday with six loads picking up.

The fix is to keep the handover alive. Three habits do most of the work:

  • Keep open loads on a shared list or record every day, not only before a vacation. Each load shows its status and next step.
  • Keep the rules page current. When a customer changes its receiving hours or a new carrier gets approved, update the page that day.
  • Rotate the backup in once a month. Let the backup run freight for a day while the logistics person is in the building. Skills that are used once a year fade.

With these habits, an unplanned absence becomes a normal day for the backup, not a crisis.

What should the vacation-coverage checklist look like?

Use one checklist so nothing depends on memory. Each item has an owner and a date.

The checklist

Item Done when Owner Due
List of recurring work Daily, weekly and monthly tasks written down Logistics person Two weeks before
Written rules Carriers, customers, approvals, exceptions, invoices on one page Logistics person Ten days before
Contacts Carrier, customer and internal contacts in one table Logistics person One week before
Backup named Backup agrees and blocks time each day Manager Two weeks before
Escalation person named Knows the job and answers the same day Manager Two weeks before
Inbox access Backup can see and answer freight email IT or manager One week before
Side-by-side days Backup runs the work for at least two days Both Three days before
Open loads handed over Every load has status, next action and date Both Last day
Out-of-office message Names the backup and the shared address Logistics person Last day
Carrier and customer notice Main contacts know who to write to Logistics person Last day
Invoice rule Invoices wait or follow written rules Manager One week before
Daily check-in Backup and escalation person talk briefly each day Backup During
Return notes What changed is noted on each load Backup During

A daily routine for the backup

A short routine keeps the backup from missing things:

  1. Check new orders and quote requests first thing.
  2. Confirm today's pickups with each carrier.
  3. Check tracking on loads due to deliver today and tomorrow.
  4. Answer carrier and customer emails.
  5. Request PODs for loads delivered yesterday.
  6. Note anything outside the rules for the escalation person.
  7. Write a two-line summary at the end of the day.

The first two days back

The return matters as much as the handover. On the first morning back, the logistics person and the backup should go through every load that moved during the vacation in 30 minutes: what shipped, what was late, what is still open, what decisions the escalation person made and which invoices are waiting. Anything the backup learned, such as a new carrier contact or a customer's changed receiving hours, goes into the rules and contacts pages before it is forgotten. Then the backup hands the open loads back with the same format: status, next action, date.

What to measure

If the company wants to know whether the handover worked, count three things during the vacation: pickups missed, quotes that expired before booking, and customer complaints about freight. Compare them with a normal two-week period. The freight coordination KPIs guide lists other measures worth tracking all year.

How does Wilson, by Cartage, keep freight running when the logistics person is away?

Wilson, by Cartage, is an AI logistics agent that does the daily freight work and keeps every load, rule and contact on one record, so freight does not stop when one person is out. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.

Wilson works as a free logistics department, built on four parts.

The labor. Wilson does the labor from the first quote to the final POD. It requests quotes from the company's approved carriers, negotiates toward the company's rate targets within approval limits, books with written acceptance and a rate confirmation, schedules pickups and tracks each load. It follows up with carriers by phone and email, with persistence rules per carrier, until it gets an answer. When a pickup is missed or a load is dropped, it contacts the carrier, tells the team and starts rebooking from the approved carrier list within the rules or after approval. It also follows up with people on the company's own team who do not answer, in the channel they normally use, and escalates to the team. The backup does not have to remember every next step, because Wilson is already working on it.

The data. Wilson keeps the data on record as it works: every order, load, quote, rate, document and contact. The rules that usually live in one person's head, such as a customer's receiving hours or the first-choice carrier on a lane, can be kept as rules and memories the team can see and edit. When the team changes something on a single load, Wilson treats it as a change to that load; if it looks like a rule, Wilson asks the team before making it one. Every message, confirmation and change is kept in the shipment's change history, so the person coming back can see what happened. Wilson replaces the TMS for freight execution and connects to the company's ERP. Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.

The network. Wilson gives access to the network: the shipper's volume counts with every other Wilson customer's, which helps get better rates on every lane. The network includes carriers and brokers. The company still approves who hauls its freight.

The payments. Wilson handles the payments: it requests and files PODs, audits each carrier invoice against the rate confirmation and the POD, and pays carriers from the Wilson Wallet. Invoices over the rate or outside the rules are held and flagged for a person, so nothing extra gets paid while the usual reviewer is away.

The team reaches Wilson by email, Slack, Microsoft Teams, text, WhatsApp or phone. Control stays with the company: Wilson starts with assisted execution, the company sets the approval limits, and routine actions run automatically within those rules as the workflow is proven.

Pricing

Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract. Timing depends on scope: most teams start on a few lanes and expand from there.

FAQs

Can Wilson run our freight while our logistics person is on vacation?

Wilson, by Cartage, an AI logistics agent, does the daily freight work: quotes, bookings, tracking, carrier follow-ups, PODs and invoice checks, within the company's rules and approval limits. Anything outside the rules goes to the person the company names. Every load stays on one record, so the person coming back can see what happened.

How early should we start the handover?

About two weeks before. That leaves time to write down the work, the rules and the contacts, and to run a few days side by side. A handover done on the last afternoon always misses something.

Who should be the backup?

Someone who already touches freight or customers, such as customer service, a shipping clerk or a buyer. They should block real time each day. Also name an escalation person for decisions outside the rules.

What should happen to the logistics person's email?

Give the backup access, set up forwarding or move freight email to a shared address. Turn on an out-of-office message that names the backup. Carriers and customers should know where to write.

Should freight invoices wait until the person returns?

They can wait a week if carriers accept that. If not, write rules for the backup: invoices that match the agreed rate and POD can be approved; anything over the rate goes to the escalation person.

What is the most common handover mistake?

Open loads without a next step. Every open load should have a status, one next action and a date. "In progress" is not a handover.

How does Wilson know our carrier and customer rules?

The team sets the rules, approved carriers and approval limits. Wilson also keeps preferences it learns from its own work, which the team can see and edit. It asks before turning a one-time change into a rule.

Can the team talk to Wilson on Slack or Teams?

Yes. The team can reach Wilson by email, Slack, Microsoft Teams, text, WhatsApp or phone. Carriers are reached by email, API, EDI or phone where configured.

Does Wilson replace the logistics person?

Wilson does the repetitive freight work and keeps the record. The company's people still own the rules, approve exceptions and manage carrier and customer relationships. Most teams start on a few lanes and expand from there.

Sources

Let's review what your logistics person keeps in their head. You don't need to prepare anything: Cartage maps the workflow with you on the call.

Add Cartage as a preferred source on Google