Should we book LTL on carrier websites or by email?

Freight pickups guideNov 16, 202617 min read

Should we book LTL on carrier websites or by email?

A logistics coordinator at a hypothetical distributor has eleven LTL orders to ship by Thursday. She has six browser tabs open, one for each carrier website, and a sticky note with the passwords. Two carriers only take quotes by email. One website logged her out halfway through a quote. By noon she has quotes in three formats, two BOLs downloaded to her desktop and a PRO number in a confirmation email she cannot find. Her manager asks which carrier is cheapest on the Denver orders. She is not sure.

Book LTL through whatever channel each carrier handles well, but keep every quote, booking, BOL and PRO on one shipment record so the team can compare carriers and answer questions without opening each website or inbox. The choice between carrier websites and email is real, but it is secondary. A team that books through both and keeps one record does better than a team that picks one channel and still scatters the paperwork.

Most LTL teams already use a mix. Large carriers push shippers to their websites. Regional carriers often prefer email or phone. Some carriers offer an API or EDI connection for shippers with steady volume. The question is not which single channel to use, but how to run a mix without losing the thread.

What each channel is good at

Carrier websites give an instant quote from one carrier, print a BOL and label, and schedule the pickup in one session. They are good when the team ships often with that carrier and the shipment is simple. They are poor at comparison. To compare five carriers, someone enters the same shipment five times.

Email works with every carrier, including those without a website quote tool. It leaves a written record of what was asked and what was agreed. It is slower per quote and depends on someone matching each reply to the right load.

API or EDI connections send the shipment and receive the quote, booking confirmation and status updates as data. They take setup work for each carrier but remove the retyping. They make the most sense with the carriers that move a large share of the company's LTL freight.

Phone is still part of LTL, mostly for exceptions: a pickup that did not happen, a rush order or a dock problem. It needs a written follow-up so the call is not lost.

Why comparing gets hard

LTL quotes vary in more than price. One quote includes a liftgate, another lists it as extra. One shows a two-day transit, another three. One quote is valid for seven days, another for the day. When quotes come from different websites and inboxes, the team either compares them carefully, which takes time, or books with the carrier it used last time. The second habit is how freight costs drift up without anyone deciding they should.

Want to see your LTL booking flow on one page?

Let's review how your team books LTL today. You don't need to prepare anything: Cartage maps the workflow with you on the call.

See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.

Book a demo →

How do you book an LTL shipment step by step, whatever the channel?

Book every LTL shipment with the same eight steps, so the channel changes only how each step happens, not whether it happens. The steps below work for a carrier website, an email thread or a connection.

Step 1: Check the order data

Before any quote, confirm the origin and destination addresses, ready date, dock hours, number of handling units, weight per unit, dimensions, freight class and any accessorials. Accessorials include liftgate, inside delivery, residential delivery, limited access and appointment delivery. A quote built on wrong data turns into a reweigh, a reclass or an extra charge later. The freight order data checklist before a quote covers the full list.

Step 2: Request quotes from approved carriers

Send the same shipment details to each approved carrier on the lane. On a website, enter them. By email, use one standard template so every carrier gets the same facts. Through a connection, send the data once. Record each quote with its number, total, included charges, transit time and expiry.

Step 3: Compare on total cost

Compare the full cost of each quote, including fuel and every accessorial the shipment needs, not the base rate. A quote that leaves out the liftgate is not cheaper than one that includes it. See how to compare LTL shipping costs with accessorials before booking for a method.

Step 4: Book with written acceptance

Tender the shipment to the chosen carrier and get written acceptance. On a website, that is the booking confirmation. By email, it is the carrier's reply that confirms the load, the rate and the pickup date. A quote by itself is not a booking, as the guide on why a freight quote is not a booking explains.

Step 5: Create the BOL

Generate the BOL with the same class, weight, dims, piece count and accessorials that were quoted. If the BOL differs from the quote, the invoice will follow the BOL or the carrier's measurement, not the quote.

Step 6: Confirm the pickup and record the PRO

Confirm the pickup date and window with the carrier and record the PRO number on the load. The PRO is how the carrier tracks the shipment and how the invoice will reference it.

Step 7: Track and handle exceptions

Track the load until delivery. If the pickup is missed or the delivery slips, contact the carrier, tell the people who need to know and decide whether to rebook.

Step 8: Collect the POD and check the invoice

Request the POD after delivery. Check the carrier invoice against the rate confirmation, the BOL and the POD before payment. Reweigh and reclass lines should be compared with the booking and the documents.

A standard email quote request

When a carrier takes quotes by email, one template keeps every request complete and every reply comparable. A hypothetical request looks like this:

"LTL quote request. Ref: order 48213. Pickup: our plant, ready Wednesday after 10 a.m., dock open 7 a.m. to 3 p.m., no liftgate needed. Delivery: customer distribution center, appointment required, liftgate not needed, dock available. Freight: 3 pallets, 48 by 40 by 52 inches each, 1,150 pounds total, class as listed on the attached item sheet. Please reply with total cost including fuel and the appointment charge, transit days and how long the quote is valid."

The template does three jobs. It gives every carrier the same facts. It asks for the total, not just the base rate. And it asks for the expiry, so the team knows how long it has to decide. When the replies come back, each one can be read against the same list of questions.

What to do when a reply is incomplete

Some replies leave out the transit time, the expiry or an accessorial. Do not fill the gap with an assumption. Ask the carrier in the same thread, so the question and the answer stay together. If the deadline to book is close, compare only the complete quotes and note that one carrier did not answer in full.

The same steps, three channels

Step Carrier website Email API or EDI connection
Request quote Enter shipment on each site Send one template to each carrier Send shipment data once
Compare Copy each quote into a sheet Read each reply and copy terms Quotes arrive as data
Book Click to book on the site Tender and wait for written acceptance Send tender, receive acceptance
BOL Download from the site Generate and attach Generated from the data
PRO Shown on the confirmation page In the carrier's reply Returned with the booking
Status Log in to check Ask by email or phone Status updates arrive as data
Where the record lands In each carrier's site history In someone's inbox In the connected system

The last row is the one that causes trouble. Unless someone moves each item to a shared record, the booking history ends up split across carrier websites and personal inboxes.

What gets lost when LTL bookings are spread across websites and inboxes?

When bookings are spread across channels, the team loses the comparison, the paperwork trail and the ability to answer a simple question fast. Each loss shows up a few days or weeks after the booking.

Quote numbers and terms

A carrier website quote number is valid only on that site. If the invoice comes in higher, the team needs the quote, its included charges and its date. If the quote was never saved outside the website, someone has to log back in and search, assuming the site keeps quote history that long.

BOL versions

A BOL printed from a carrier's website, edited by hand at the dock and then rescanned can exist in three versions. If the class or piece count changed, the invoice will follow the version the carrier received. The team needs the final version on the load, with a note of any change and who made it.

PRO numbers and tracking

The PRO is on the website confirmation page or in an email. Customer service needs it to answer a delivery question. If it sits in one person's inbox, customer service has to ask.

Accessorials declared at booking

On a website, the liftgate box was checked or not. In an email, the liftgate was mentioned or not. When the invoice shows a liftgate charge, the team needs to know what was declared. If the booking record does not show it, the charge is hard to dispute.

Logins and people

Carrier website accounts are often tied to one person's email. When that person is on vacation or leaves, nobody else can see the bookings or the history. Shared logins create a different problem: nobody knows who booked what.

Exceptions across channels

An LTL exception often moves through several channels: a website status, an email from the terminal, a phone call from dispatch. Each piece needs to land on the same load. The article on managing LTL exceptions across email, portals and phone covers how to match those messages.

Who chose the carrier, and why

Weeks later, someone asks why a load went with a carrier that was slower than usual. If the comparison happened in a browser and the decision in someone's head, nobody can answer. The record should say which quotes were received, which one was booked and the reason, such as the only carrier that could pick up that day.

A hypothetical month

Consider a hypothetical distributor that ships 200 LTL loads a month across six carriers. If each booking takes ten minutes on a website and the team checks three carriers per load, comparison alone is 30 minutes a load, or 100 hours a month. If the team skips comparison on most loads to save time, it books the habitual carrier and never learns whether another approved carrier was cheaper on that lane. Either way, the cost is real. It just appears in different places.

When is a carrier website, email or a connection the better choice?

Choose the channel per carrier and per task, based on volume, how the carrier works and how much of the record the channel keeps for you. The rules below help decide.

Decision rules

  • High volume with one carrier: ask about an API or EDI connection. The setup is worth it when the carrier moves a large share of the company's LTL.
  • Occasional carrier with a good website: use the website for booking, but save the quote, BOL and PRO to the shared record the same day.
  • Carrier without a quote tool: use email with a standard template, and match the reply to the load.
  • Rush or exception: call the carrier, then confirm in writing.
  • Comparing several carriers on one load: use whatever channel returns a comparable total fastest, and compare in one place.

Common mistakes

Picking the channel by convenience, not by lane. The carrier with the easiest website gets the most loads, even on lanes where another approved carrier is cheaper or faster.

Treating the website history as the record. Carrier website history is the carrier's record, not the company's. It may be limited in how far back it goes, and it only shows that carrier.

Booking by email without written acceptance. "Sounds good" in reply to a quote request is not a clear acceptance of the rate and pickup date. Ask for a rate confirmation.

Quoting with different data on different channels. The website form defaults to one class, the email says another. The comparison is then between two different shipments.

Letting quotes expire unnoticed. LTL quotes have a validity period. A quote booked after it expired may be billed at a different rate. The guide on flagging expired LTL quotes before they become a bad booking explains how to catch them.

When to revisit the channel for a carrier

Review the channel for each carrier twice a year. If a carrier booked through its website now moves many loads a week, ask whether it offers an API or EDI connection. If a connected carrier now moves only a few loads a month, the connection may not be worth maintaining. If a carrier's email replies have become slow or incomplete, note it on the carrier record and raise it with the carrier's account contact before it costs a missed pickup.

A channel decision table

Situation Best channel What to save on the load
Carrier moves a large share of LTL API or EDI connection where offered Quote, acceptance, BOL, PRO, status
Carrier used a few times a month Carrier website or email Quote number and total, confirmation, BOL, PRO
Regional carrier with no quote tool Email Quote reply, rate confirmation, BOL, PRO
Missed pickup or delivery problem Phone, then email Call notes and written follow-up
Comparing several approved carriers Mix, compared in one place Every quote with total, transit and expiry
Invoice dispute Email Invoice, rate confirmation, BOL, POD, reply

What should every LTL booking record contain?

Every LTL booking record should hold the same items, whichever channel booked it. Use this checklist to test whether a load's record is complete.

Item Why it matters
Order or PO reference Ties the load to the sale or purchase
Origin, destination and dock hours Basis for pickup and delivery
Handling units, weight and dimensions Basis for the quote and reweigh checks
Freight class Basis for the rate and reclass checks
Accessorials requested Basis for checking extra charges
Every quote received Shows the comparison and the decision
Carrier chosen and why Explains the booking later
Written acceptance and rate confirmation Fixes the agreed rate
Final BOL Shows what the carrier received
PRO number Links tracking and the invoice
Pickup confirmation Confirms date and window
Status updates and exceptions Answers customer questions
POD Proves delivery and condition
Invoice and audit result Shows what was paid and why

How to test your current records

Pick ten LTL loads from last month. For each one, try to find every item on the list in under two minutes, without asking anyone. Count how many items you found in a shared place, how many were in a carrier website or a personal inbox, and how many were missing. That count tells you more than any debate about websites versus email.

Who should keep the record

The person or agent that books the load should also keep its record, because the booking is when most of the information appears. If records are filled in later by someone else, items get missed. The rule is simple: the load is not booked until its record holds the quote, acceptance, BOL and PRO.

How does Wilson, by Cartage, book LTL across carriers?

Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks and pays LTL freight with the company's approved carriers, and keeps every quote, document and message on one shipment record whichever channel the carrier uses. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.

cartage.ai describes Wilson as a free logistics department: what big shippers build over years, Wilson does from day one. For LTL booking, its four parts work like this.

The labor

The labor covers the eight steps. Wilson requests quotes from approved carriers and compares them on total cost, including fuel and accessorials. It negotiates toward the company's rate targets within approval limits. It books with written acceptance and a rate confirmation, generates the BOL, packing slip and pallet labels, schedules the pickup and records the PRO. It tracks each load with the best source available: a carrier API or EDI feed, GPS or ELD data where the carrier shares it, the carrier's website by PRO number, or email and phone calls when nothing else is current. It follows up with carriers by phone and email, with persistence rules per carrier, until it gets an answer.

Wilson works with carriers by email, API and EDI where supported, and phone calls where configured. How each carrier is connected depends on the setup; confirm it in discovery.

The data

The data is the single record. Wilson keeps every order, load, quote, rate, document and contact on record as it works, connected to the company's ERP. Every message, confirmation and change is kept in the shipment's change history. BOL changes to address, freight class, carrier or price are routed to the load owner. Wilson replaces the TMS for freight execution and connects to the company's ERP.

Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.

The network

The network gives the shipper better freight rates on every lane, because its volume counts with every other Wilson customer's. The network includes carriers and brokers. The company still approves who hauls its freight. Booking uses a ranked list of carriers per lane plus decision rules by lane and mode.

The payments

The payments close each booking. Wilson audits each carrier invoice against the rate confirmation and POD, including reweigh and reclass lines against the booking and documents, then pays carriers from the Wilson Wallet. An invoice over the rate or outside the rules waits for a person, and Wilson asks the carrier why before paying.

Control and start

Control starts with assisted execution. The company sets approval limits, and routine actions run automatically within those rules as the workflow is proven. The team reaches Wilson by email, Slack, Microsoft Teams, WhatsApp, text or phone. Timing depends on scope: most teams start on a few lanes and expand from there.

Pricing

Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.

FAQs

Can Wilson book our LTL freight by email instead of carrier websites?

Wilson, by Cartage, an AI logistics agent, books LTL with the company's approved carriers by email, API and EDI where supported, and phone calls where configured. It collects written acceptance and a rate confirmation, generates the BOL and records the PRO on the shipment. How each carrier is connected depends on the setup.

Is it faster to book LTL on a carrier's website?

For one shipment with one carrier, often yes. For comparing several carriers on the same shipment, no, because each website needs the shipment entered again and shows quotes in its own format.

Is an email booking legally weaker than a website booking?

What matters is clear written acceptance of the load, rate and pickup date, usually in a rate confirmation. An email thread that contains that acceptance is a written record. A vague reply is not.

Should we connect to every LTL carrier by API or EDI?

Not necessarily. Connections take setup work for each carrier. They make the most sense with carriers that move a large share of your LTL volume.

How do we compare LTL quotes from different channels?

Put every quote in one place with the same fields: total cost including fuel and accessorials, transit time, expiry and what is excluded. Compare totals, not base rates.

Where should the BOL for an LTL load be kept?

On the shipment record, in its final version, with any change noted. If the BOL changes at the dock, the invoice will follow what the carrier received.

Can Wilson track LTL loads booked with different carriers?

Yes. Wilson tracks each load with the best source available: a carrier API or EDI feed, GPS or ELD data where shared, the carrier's website by PRO number, or email and phone calls. Updates land on the shipment record.

What does Wilson do when an LTL invoice includes a reclass?

Wilson audits reweigh and reclass lines against the booking and the documents. An invoice over the rate or outside the rules waits for a person, and Wilson asks the carrier why before paying.

Does Wilson only book carriers we approve?

Yes. Wilson books only carriers the company has approved, using a ranked list per lane. Cartage can suggest additional capacity, but the company approves each carrier first.

What should an LTL quote request by email include?

Addresses, ready date, dock hours, handling units, dimensions, weight, freight class and required accessorials. Ask for the total including fuel, the transit time and how long the quote is valid, so every reply can be compared on the same terms.

Sources

Let's review how your team books LTL today. You don't need to prepare anything: Cartage maps the workflow with you on the call.

Add Cartage as a preferred source on Google