Our warehouse doesn't know which trucks are coming today. How do we fix that?
Short answer
Give the warehouse one daily list of pickups, built from the booked loads. Show which times the carrier confirmed and which are only proposed. Send every change to a named dock contact and ask for a reply. Check the list again before each shift. Wilson, by Cartage, an AI logistics agent, schedules these pickups and tells your team when a carrier changes a time.
Book 15 minutes with the team →How do you make sure the warehouse knows which trucks are coming today?
At 9:20 a.m., a truck pulls into the yard of a manufacturing plant. The driver has a pickup number. The shipping lead has never heard of it. She checks the printed list from 6:00 a.m. It is not there. She calls the logistics office. The coordinator who booked it is on another call. Ten minutes later, someone finds the email: the carrier moved the pickup from tomorrow to today, and the coordinator replied "OK" but did not tell the dock. The freight is not staged. The driver waits, the next truck arrives, and the dock falls behind for the rest of the morning.
To fix it, give the warehouse one daily pickup list built from the booked loads, mark each time as confirmed or proposed, send every change to a named dock contact who confirms it, and check the list again at the start of each shift and before each pickup window. The list should come from the same record logistics uses to book, so it can't drift from what was agreed with the carrier.
The warehouse problem is rarely about the first list. Logistics usually knows what it booked yesterday. The problem is what happens after: a carrier moves a time, a load is added at 8:00 a.m., a pickup gets cancelled, a driver runs late. Each change travels by email, phone or chat, and some never reach the dock.
What the warehouse needs to know
For each truck, the dock needs a few facts:
- The carrier and the pickup or reference number the driver will give.
- The scheduled time or window, and whether it is confirmed.
- What is being picked up: order, pallet count, any special handling.
- The dock door or area, if the plant assigns them.
- Who in logistics owns the load.
With these, the shipping lead can stage freight, plan doors and staff, and greet the driver without a phone call.
Why it matters beyond the dock
A dock that knows what is coming loads trucks faster and keeps drivers waiting less. That protects the shipper from detention charges and keeps carriers willing to come back. The American Transportation Research Institute found detention at 39.3% of truck stops in 2023, with more than 135 million hours lost. Some of that waiting happens at shippers' own docks, where trucks show up and the freight is not ready.
Where to start
Let's review how your warehouse learns about today's pickups. You don't need to prepare anything: Cartage maps the workflow with you on the call.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.15 minutes with the team behind Wilson. No prep needed.
Book 15 minutes →What should the daily pickup workflow look like?
A working pickup workflow has four parts: build the list from booked loads, mark each time's status, push every change to the dock, and recheck at set times. Each part has a simple rule.
Part 1: Build the list from booked loads
The list for today should be generated from the loads that are booked with a pickup date of today, plus loads that are booked for tomorrow but could move up. It should not be typed by hand from memory or copied from yesterday's emails. If the team uses a spreadsheet, at least make it the same spreadsheet logistics books from.
Send the list at a fixed time before the first shift starts. Many plants want it the evening before and again at shift start.
Part 2: Mark the status of each time
Every row should show how firm the time is. A simple set of labels works:
| Status | Meaning | What the dock should do |
|---|---|---|
| Confirmed | Carrier confirmed the date and time or window in writing | Stage freight for that time |
| Proposed | Time requested by logistics, carrier has not confirmed | Prepare, but do not commit a door or crew yet |
| Changed | Carrier proposed a new date or time, team is deciding | Wait for the decision, keep the original plan |
| At risk | Carrier late, driver delayed, or freight not ready | Talk to the load owner |
| Cancelled | Pickup will not happen today | Release the door and staff |
The labels keep the dock from treating a hope as a commitment.
Part 3: Push every change to the dock
When a pickup changes, the change must reach the dock, and the dock must say it got it. A new line in a spreadsheet nobody refreshes does not count. Send the change to the named dock contact in the channel the dock actually reads: a team chat, a text, a shared email that someone watches. Ask for a short reply. The article on whether the warehouse got the update after the carrier rescheduled pickup covers the confirmation step in detail.
Part 4: Recheck at set times
Recheck the list:
- At the start of each shift.
- An hour or two before each pickup window, for loads not yet confirmed.
- When a driver checks in for a load that is not on the list.
Each recheck takes a few minutes if the list comes from the booking record. It takes much longer if someone has to search email.
What the list should look like on the dock
The people who use the list are on their feet, often with gloves on and a scanner in one hand. Design the list for them:
- Sort by time, not by order number. The dock thinks in hours of the day.
- Put the status first. A shipping lead should see at a glance which trucks are firm.
- Keep one line per truck. Details like line items can sit behind the reference number.
- Show the reference the driver will give. Drivers arrive with a pickup number, a PRO or a load number. If the list only shows the internal order number, the dock has to translate.
- Show the owner's name and how to reach them. A name and a chat handle or phone number save minutes on every question.
If the dock prints the list, print a time on it. "List as of 6:05 a.m." tells everyone how old it is.
When there is more than one plant or dock
Companies that ship from several plants or warehouses need one list per site, built from the same record. A load booked for the wrong site is one of the most expensive surprises: the truck goes to a dock that has no freight for it. The site should be a required field on every booking, and each dock should only see its own trucks. When a load moves from one site to another, both docks should hear about it.
A hypothetical day
Consider a hypothetical plant with nine pickups planned for Tuesday:
- 6:00 a.m. list: seven confirmed, two proposed.
- 7:40 a.m.: one proposed pickup is confirmed for 1:00 p.m. The dock gets a message and replies.
- 8:15 a.m.: a carrier says it can't make the 10:00 a.m. pickup until Wednesday. The team decides whether to accept the new date or rebook. The dock sees the load marked "changed" until the decision is made.
- 9:00 a.m.: the team rebooks with the next approved carrier for 2:00 p.m. The dock gets the new carrier, reference number and time.
- 11:30 a.m.: a new order is booked for same-day pickup at 4:00 p.m. The dock gets it and confirms it can stage in time.
At no point does a truck arrive that the dock did not expect.
What should happen when a pickup time changes?
A changed pickup should be treated as a proposal until someone on the team decides, and the decision should reach the dock with a reply. The worst outcome is a change that one person accepted and nobody else knows about.
Who decides on a new date
When a carrier says it can't pick up until a later day, the decision is not only about freight. The plant may have a customer delivery date, a production schedule or a dock that is full that day. The load owner should decide, with input from the plant if needed:
- Accept the new date and tell the customer if the delivery moves.
- Ask the carrier for the original date again.
- Rebook with another approved carrier that can make the original date.
Until someone decides, the load keeps its agreed date, and the expected date shows the carrier's proposal. That way nobody mistakes the proposal for the plan.
Same-day additions
New pickups booked during the day are a common source of surprise trucks. Set a rule: any pickup added for today must be confirmed with the dock before the carrier is told it is ready. If the dock can't stage it in time, the team knows before the truck is on the way. The article on why staged freight still misses pickup after the warehouse says it is ready covers the other side of that handoff.
Cancellations
A cancelled pickup should reach the dock as fast as a new one. Otherwise the crew stages freight and holds a door for a truck that is not coming. Mark it as cancelled on the list and send a short note.
Driver running late
When a driver is late, the dock needs a new estimate, not just a warning. Ask the carrier for a fresh arrival time, or ask the driver directly if you have the number. Then update the list. If the delay pushes the pickup past the dock's closing time, the team needs to decide whether to hold staff or move the pickup.
Shift changes
Many surprise trucks arrive just after a shift change. The morning crew knew about the change; the afternoon crew did not. Make the shift handoff point to the current list, not to the morning printout. The guide on freight handoff tools across shifts lists what a good handoff includes.
Dock appointments and calendars
If the plant uses a dock calendar for its own doors, pickups should be on it. When a carrier confirms a time, the appointment goes on the calendar. When the time changes, the appointment moves. A calendar that only the warehouse updates, separate from the bookings, will drift from what logistics agreed.
What goes wrong when the warehouse is left out?
Most surprise trucks come from changes that stayed in someone's inbox, lists built by hand, and soft times treated as firm. These are the common mistakes.
Mistake 1: The morning list is the only list
A list printed at 6:00 a.m. is right at 6:00 a.m. By noon, a quarter of it may have changed. If the dock relies on the printout, every change is a surprise.
Mistake 2: "OK" by email counts as done
A coordinator who replies "OK" to a carrier's new time has accepted the change for the company. If the dock does not hear about it, the acceptance is half done. Every accepted change needs a second message: to the dock.
Mistake 3: Proposed times shown as confirmed
When a requested pickup time goes on the list before the carrier confirms it, the dock plans for a truck that may not come. Label the status.
Mistake 4: Nobody owns the dock's question
When a driver arrives and the load is not on the list, the dock needs one person to call. If the answer is "try the logistics office", the driver waits while people search. Each load should show its owner.
Mistake 5: The warehouse hears about changes from the driver
The driver is the last person who should be telling the dock about a change. By then, it is too late to stage freight or plan doors.
Mistake 6: The carrier's date change is accepted silently
A carrier email that says "we'll be there Thursday instead of Wednesday" can slip into the plan without anyone deciding. The customer then hears about a late delivery after it happens. Treat every date change as a decision.
Mistake 7: The list lives on one person's desk
When one coordinator builds and sends the list, the dock is in the dark the day that person is out. The list should come from the booking record, so anyone on the team can send it, and the dock can open it without asking.
Mistake 8: Detention at your own dock
When trucks arrive and freight is not ready, the carrier may bill detention. That cost is often caused by the shipper's own information gap. See how to reduce detention charges at your docks for the dock-side fixes.
A short decision guide
| Event | Who acts | What reaches the dock |
|---|---|---|
| New pickup booked for today | Load owner | New row, status, time, carrier, reference; dock confirms it can stage |
| Carrier confirms a proposed time | Load owner | Status changes to confirmed |
| Carrier proposes a later date | Load owner decides | Row marked changed; final decision sent once made |
| Load rebooked with another carrier | Load owner | New carrier, reference and time |
| Driver running late | Load owner | New arrival estimate and source |
| Pickup cancelled | Load owner | Row marked cancelled; door released |
| Driver arrives, load not on list | Dock calls load owner | Load owner confirms or rejects the pickup |
What checklist should logistics and the warehouse agree on?
Agree once on the list, the labels, the channel and the checks, and the daily routine runs on its own. Use this checklist to set it up.
| Item | Question to answer | Owner |
|---|---|---|
| List source | Is the pickup list built from the booked loads? | Logistics |
| Send time | When does the dock get the list: evening before, shift start, both? | Logistics and warehouse |
| Fields | Does each row show carrier, reference, time, status, freight, door and owner? | Logistics |
| Status labels | Are confirmed, proposed, changed, at risk and cancelled used consistently? | Logistics |
| Dock contact | Who on each shift receives changes? | Warehouse |
| Channel | Where do changes go: chat, text or shared email? | Logistics and warehouse |
| Reply | Does the dock confirm each change? | Warehouse |
| Same-day adds | Must the dock confirm before the carrier is told the freight is ready? | Logistics and warehouse |
| Date changes | Who decides when a carrier proposes a new date? | Logistics |
| Rechecks | When is the list rechecked during the day? | Logistics |
| Shift handoff | Does the handoff point to the current list? | Warehouse |
| Dock calendar | Are pickups on the dock calendar and moved when times change? | Logistics and warehouse |
| Unknown truck | What does the dock do when a truck arrives that is not on the list? | Warehouse |
How to roll it out
Start with one plant or one dock. Run the list and the change messages for two weeks. Count the trucks that arrived without the dock knowing. For each one, find where the change got stuck: a carrier email, a coordinator's "OK", a same-day add, a shift change. Fix that path, then add the next dock.
What to measure
- Trucks that arrived and were not on the current list.
- Pickups where freight was not staged when the truck arrived.
- Detention billed at the company's own docks.
- Changes sent to the dock without a reply.
When these numbers drop, the dock and logistics are working from the same plan. The checklist in what a pickup confirmation should include is a useful companion for the carrier side.
How does Wilson, by Cartage, keep the warehouse updated on today's pickups?
Wilson, by Cartage, is an AI logistics agent that books and schedules pickups, keeps each load's times on one record, and brings carrier changes to the team so the dock works from what was actually agreed. Traditional logistics software gives teams information. Wilson executes the work required to move shipments forward.
The labor
The labor is the scheduling and the follow-up. Wilson quotes the company's approved carriers, books with written acceptance and a rate confirmation, and schedules pickups. It checks carrier availability before booking. If a carrier says it can't pick up until a later day, Wilson does not accept that silently: it presents the option to the team, updates the expected date on the shipment and leaves the agreed date unchanged. The team decides on any date change.
When a pickup is missed, cancelled or delayed, Wilson contacts the carrier, tells the team and starts rebooking from the approved carrier list, automatically within the rules or after approval. It follows up with carriers by phone and email until it gets an answer, and it can call or text a driver directly when it has the driver's number. It also follows up with people on the company's own team who don't answer, in the channel they normally use, and escalates when needed.
Wilson can read and create appointments in a connected dock calendar. It is not integrated with third-party dock-scheduling portals. How the daily pickup list reaches each dock, and in which channel, is set up with the team; confirm the details in discovery.
The data
The data keeps the plan in one place. Wilson keeps every order, load, quote, rate, document and contact on record as it works, connected to the company's ERP. It can keep rules the team sets or edits, such as a dock's pickup hours. Every message, confirmation and change stays in the shipment's change history, so anyone can see when a time was confirmed or moved and by whom. Wilson replaces the TMS for freight execution and connects to the company's ERP.
Wilson works with SAP, NetSuite, Microsoft Dynamics 365, Oracle, Infor, Epicor, Sage, Acumatica and other ERP environments, with the exact connection depending on the customer's data flow and scope.
The network
The network gives the shipper better freight rates on every lane, because its volume counts with every other Wilson customer's. The network includes carriers and brokers, and the company still approves who hauls its freight.
The payments
The payments close the load. Wilson requests and files PODs, audits each carrier invoice against the rate confirmation and the POD, and pays carriers from the Wilson Wallet. A detention charge from the company's own dock is checked against the load record. Invoices over the rate or outside the rules wait for a person.
Control
Teams reach Wilson by email, Slack, Microsoft Teams, SMS, WhatsApp or phone. Control starts with assisted execution: the company sets approval limits, and routine actions run automatically within those rules as the workflow is proven. Timing depends on scope: most teams start on a few lanes and expand from there.
Pricing
Wilson is free on Wilson's network: the shipper pays the freight rate and nothing on top. When a shipper keeps its own carriers, the fee is 2% to 0.5% of what Wilson pays them, falling with volume. There are no seat fees, no setup cost and no contract.
See it on your own loads. Wilson, by Cartage, is an AI logistics agent that quotes, books, tracks, audits and pays for freight with your approved carriers.15 minutes with the team behind Wilson. No prep needed.
Book 15 minutes →FAQs
Can Wilson keep our warehouse updated on today's pickups?
Wilson, by Cartage, an AI logistics agent, schedules pickups, keeps each load's times on one record and tells the team when a carrier changes a time. It updates the team by email, Slack, Microsoft Teams or SMS, and it can read and create appointments in a connected dock calendar. How the list reaches each dock is set up with the team.
Why do trucks show up that the dock doesn't expect?
Usually because a time changed after the list was made, a pickup was added during the day, or a change was accepted by email and never sent to the dock.
What is the difference between a confirmed and a proposed pickup time?
A confirmed time is one the carrier agreed to in writing. A proposed time is one logistics asked for, or one the carrier suggested, that nobody has agreed to yet. The dock should plan around confirmed times.
What does Wilson do when a carrier moves a pickup to a later day?
It does not accept it silently. Wilson presents the option to the team, updates the expected date on the shipment and leaves the agreed date unchanged until the team decides.
Does Wilson work with dock scheduling portals?
Wilson can read and create appointments in a connected dock calendar. It is not integrated with third-party dock-scheduling portals.
How often should the pickup list be checked?
At the start of each shift, before each pickup window for loads that are not yet confirmed, and whenever a driver arrives for a load that is not on the list.
Who should the dock call when a truck isn't on the list?
The load owner named on the list. Every load should show one, so the dock does not have to search for the right person.
Can surprise trucks lead to detention charges?
Yes. If a truck arrives and freight is not staged, the driver may wait past the free time in the rate confirmation, and the carrier may bill detention.
Should inbound trucks be on the same list?
Many warehouses find it useful, because inbound and outbound trucks share the same doors and crews. Inbound loads need the same confirmed or proposed labels.
Does the warehouse need to learn a new tool?
Not necessarily. Changes can reach the dock in the channel it already uses, such as a team chat, text or shared email. What matters is that the list comes from the booked loads and the dock confirms changes.
Sources
- Cartage, Wilson product FAQ and product scope, October 2026: https://cartage.ai
- American Transportation Research Institute, truck driver detention study, September 2024: https://truckingresearch.org/2024/09/new-research-documents-substantial-financial-and-safety-impacts-from-truck-driver-detention/
Let's review how your warehouse learns about today's pickups. You don't need to prepare anything: Cartage maps the workflow with you on the call.
